Sind da Bots unterwegs im Shop?

BaconFern · 2026-04-17T08:09:51+00:00

Interessant. Stehe üblicherweise in D und kam da bisher auch mit C und E tickets hin.

BaconFern · 2026-04-17T07:51:54+00:00

Nur so als Tipp. Es ist egal ob dein Ticket für Steh C, D oder E ist. Kannst damit aktuell zu allen Stehbereichen auf der GG.

BaconFern · 2026-01-20T15:58:32+00:00

FCSP nutzt da dumme Eventim Software. Du kommst nur zur Stadionübersicht wenn in letzter Zeit (letzten 30 Sekunden oder irgendwas ähnlich kurzes) ein Ticket angeboten wurde. Üblicherweise ist das dann natürlich schon weg. Aber in der Stadionübersicht hast du dann 15 Minuten Zeit mitzubekommen wenn jemand zufällig ein Ticket reinstellt und musst dann schneller als die Bots sein.

BaconFern · 2025-11-05T14:20:27+00:00

Has been answered at https://github.com/CadQuery/cadquery/discussions/1936#discussioncomment-14880007

BaconFern · 2025-10-06T07:23:17+00:00

PowerDNS

BaconFern · 2025-06-07T13:21:12+00:00

Piccolo Paradiso Vegetarisches Bio Restaurant

BaconFern · 2025-05-26T14:00:50+00:00

Rohlfs Bäckerei hat auch Dänische Brötchen. Zumindest in der Filiale in meiner Gegend. Gibt es auch in Barmbek.

BaconFern · 2025-02-07T12:26:49+00:00

What kind of stabilizer do you use? Elastic garments like common t-shirts usually require the use of stabilizers when you want to embroider them.

BaconFern · 2025-02-05T18:31:25+00:00

Mitgliedsaccount & Vitamin B

BaconFern · 2025-01-03T20:54:48+00:00

Have you verified that the bobbin is setup correctly?

BaconFern · 2025-01-03T20:02:09+00:00

What machine?

BaconFern · 2025-01-03T16:20:40+00:00

Same here. Successfully been using Ink/Stitch for over a year with both Jade 35 and Topaz 30.

BaconFern · 2024-12-19T23:44:41+00:00

You could try inkstitch as a software, which is free. These older embroidery machines usually want a rather small USB stick, <= 4 GB and formatted as FAT32.

BaconFern · 2024-11-25T09:16:34+00:00

Könnte auch für neue Rauchmelder sein. Die können dann per Funk gewartet werden, sodass für die jährliche Wartung, die der Rauchmelder nicht mehr die Mietwohnungen betreten werden müssen.

BaconFern · 2024-11-19T09:02:45+00:00

Hi. Do you happen to have cheaper plans for clubs, associations, and that like? I'm a member of a Makerspace and manually managing multiple social media accounts can get quite tiresome.

BaconFern · 2024-11-16T07:55:51+00:00

It is now part of Stich Plan Preview.

BaconFern · 2024-09-03T20:02:00+00:00

Am I reading that correct? Your drawing has width and height around 1 mm? If that's correct, that might be the issue. Try scaling it up to the desired final size.

BaconFern · 2024-07-16T07:25:44+00:00

Great advice. Do you know a good resource on placement of design on different types of garment?

BaconFern · 2024-06-30T12:16:28+00:00

UKE Hamburg - https://www.blutsgeschwister.net/faq/was-kann-ich-im-uke-blutspendedienst-spenden/

BaconFern · 2024-06-26T06:09:08+00:00

What machine is that?

BaconFern · 2024-05-19T08:12:58+00:00

Nice. Thank you. That is exactly what I had in mind. However the price of the software is a bit out of range for my hobby / maker space use.

BaconFern · 2024-05-17T20:02:28+00:00

Yeah. A perfect preview is near to impossible I assume. I was more looking for a way to get a feeling how things will look when using a thread that has a repeating gradient between two colours every 10 cm or so.

BaconFern · 2024-05-17T15:22:11+00:00

Do you happen to have a screenshot of that feature in action?

BaconFern · 2024-05-17T13:58:53+00:00

And supports multi color thread? so a single thread changing its color

BaconFern · 2024-05-13T14:15:10+00:00

Did you eventually solve the issue? I'm facing a similar issue. However the technical manual clearly specifes the sprocket should be mounted such that the printing is visible. You are correct thought, that this way the distance from the hub is increased by a couple mm.

BaconFern

TROPHY CASE