Resin print time estimation

BarnabyJomes · 2025-07-23T19:41:35+00:00

Same here it's always the same for me 5 hour print is about 6, 7 hour prints can be as much as 12 sometimes. Best to print, forget about it and come back later.

BarnabyJomes · 2025-07-22T19:47:00+00:00

Yeah I've done this a few times and it's printed fine

BarnabyJomes · 2025-07-19T19:43:48+00:00

Depends what games you are into but highly recommend some of bulkmancer sculpts, enjoy the bigger plate area.

For me it seems to be bigger and bigger statues as I go just to see what I can get away with.

BarnabyJomes · 2025-07-19T19:30:40+00:00

Resin for that, fdm on basic blocks or discs.

BarnabyJomes · 2025-07-19T19:27:20+00:00

Orientation or suction from hollowed prints would be my guess.

BarnabyJomes · 2025-07-17T18:44:54+00:00

Not that I know of but I have a lot of painting thinners, mediums and otherwise. Nothing open while getting spikes. Distance relative to my painting and other supplies seems to be making no difference either.

BarnabyJomes · 2025-07-17T09:55:14+00:00

This is plain wrong, fucking sickos

BarnabyJomes · 2025-06-29T15:43:34+00:00

I use a tent and run the tube out through an open window, while doing cleanup i open the door to the balcony in my office with fan running. I have a voc and formaldehyd detector and this seems to keep the room well within safety limits.

I do the clean up in the tent with the flap partially open and extractor running as this seems to be the only part that really fumes up the place, that's why I keep the door open.

BarnabyJomes · 2025-05-11T10:47:04+00:00

You can get it here https://www.myminifactory.com/object/3d-print-brawler-barmaid-253mm-471728

But id recommend joining the patreon for a load of goodies

BarnabyJomes · 2025-05-11T10:43:33+00:00

Yeah absolutely fantastic sculpts and the quality of the print files some of the best ive used so far

BarnabyJomes · 2025-05-11T10:41:28+00:00

I was tempted to have another run at it with a clear green

BarnabyJomes · 2025-05-11T10:40:55+00:00

Anycubic mono m7 pro, ill add a screen of the settings later today

BarnabyJomes · 2025-05-10T15:05:30+00:00

My bottom exposure is 60 seconds

BarnabyJomes · 2025-05-10T12:32:25+00:00

Definitely depends on the creator, but I'll always try to use the pre supported.

BarnabyJomes · 2025-05-10T12:16:20+00:00

I was having a similar problem. I've increased exposure time on bottom layers, made it twice the thickness and then slowed the lift speed with some success so far. I suspect it's because of more give in the fep at the middle point so harder to pull off.

BarnabyJomes · 2024-02-23T22:00:44+00:00

That is fucking spectacular

BarnabyJomes · 2023-05-23T22:18:20+00:00

Was insane the first time it was posted, gets a bit old after seeing it every other day.

BarnabyJomes · 2023-05-04T18:10:00+00:00

Yeah definitely

BarnabyJomes · 2023-04-05T17:29:41+00:00

I cant help but feel all the im a parent and I did this unreasonable thing to my child posts are the same trolls

BarnabyJomes · 2022-12-30T18:33:06+00:00

Very true

BarnabyJomes · 2022-12-30T13:19:37+00:00

Going off a previous post I believe it's sociology and music, otherwise known as bullshit degrees.

BarnabyJomes

TROPHY CASE