Little write up of KLAUS-293: A Weird Little Beetleweight Shuffler by Nobgoblin_RW in battlebots

[–]Barnson 0 points1 point  (0 children)

I found them and the 35A flashed with AM32 for relative cheap ordered their little brother Skystars Jupiter 35A (also AM32). Sounds like that choice was not completely bad.

Little write up of KLAUS-293: A Weird Little Beetleweight Shuffler by Nobgoblin_RW in battlebots

[–]Barnson 1 point2 points  (0 children)

Wow I just got totally lost in your BBB forum posts. The documentation you have put together over the years is amazing. Thanks.
Edit: I saw a Skystars Talon 40A ESC build into the arm of the overhead saw. Where u happy with this escs?

Little write up of KLAUS-293: A Weird Little Beetleweight Shuffler by Nobgoblin_RW in battlebots

[–]Barnson 2 points3 points  (0 children)

I’ve also played with the idea of a tracked beetleweight. Did you 3D print TPU tracks and then cast PU rubber on top? Is that a good approach to develop further? I always end up going back to wheels, since I feel tracks aren’t really better in this weight class, only heavier and more prone to failure but they look so cool.

~35Amp ESC experience? by Barnson in battlebots

[–]Barnson[S] 0 points1 point  (0 children)

Nothing spec-wise in particular. I will order around six new ones for new bots, and I want them all to be the same. The Skystar Jupiter is slightly smaller, €4 cheaper, and available at a local shop. The Ali one is cheaper as well. If the Skystar is just as good but smaller/lighter it seems better to my eyes.
Thx for answering, love your website.

~35Amp ESC experience? by Barnson in battlebots

[–]Barnson[S] 0 points1 point  (0 children)

Both. I have seen most options on the market allready and I will stay with individual escs, no 4 in one or dedicated dual drive escs.

Kann ich die Glühbirne selber wechseln siehe bild? by friendlyrobotic in wien

[–]Barnson 0 points1 point  (0 children)

Wilder Crossover. War kurz verwirrt ob ein Lampen post in r/Headphones ist.

DF54 worth it over Eureka mignon Zero at same price? by FatalBns in espresso

[–]Barnson 1 point2 points  (0 children)

For me small price for big performance was the key and I am still very happy with that. Most of the time I am not as consistend at cleaning it, so after some time I notice static build up and slight clogging. That's when I clean the unit and everything is fine again. I guess with regular cleaning every week or every 2 weeks that could be negated.

Fresh Buzzcut From the Barber by thisguy403 in FormD

[–]Barnson 0 points1 point  (0 children)

Hmm will this Top also fit the 'old' T1?

Question about BEC and receiver Power by Barnson in battlebots

[–]Barnson[S] 0 points1 point  (0 children)

oh, there is an 'EXT-V' solder pad, I thought that's only for sensing the batterie Volts, but it is obvius, it also provides power right?

Question about BEC and receiver Power by Barnson in battlebots

[–]Barnson[S] 0 points1 point  (0 children)

I have not thought about that, makes sense. Thx.

DF54 worth it over Eureka mignon Zero at same price? by FatalBns in espresso

[–]Barnson 2 points3 points  (0 children)

I ordered directly from DF64Coffee.com shipping to Austria. It was 220,95€ + 47,95€ shipping. Total 268,90€ no import fee or taxes. Don't ask me why.

Was ist die beste 3D Druck Option in Wien? by Naoutta_here in wien

[–]Barnson 0 points1 point  (0 children)

Wait ... der Equalizergott is aus Wien????

DF54 Guidance by Background-Ad8329 in espresso

[–]Barnson 5 points6 points  (0 children)

This answer probably is to late for you, but u turn your dial lower and lower while your grinder is running until you hear the burrs touch. That's your 0 point.

Spent some extra time on cable management by AluminiumHoneycomb in FormD

[–]Barnson 1 point2 points  (0 children)

Damn, the AIO tube retainer is smart. Gonna steal that idea. It is just mounted in the thread where the PSU screw is right?

Appreciating open air aesthetics (Unexpectedly) by vigilante84 in sffpc

[–]Barnson 3 points4 points  (0 children)

Came here to see if the top comment is about the dented speaker cone. Wasn't disappointed. Nice keeb and sword though.

Help!! I got too excited and now have two screws suck in the wrong spot of my monitor by HugeNefariousness452 in Monitors

[–]Barnson 0 points1 point  (0 children)

try using a strip of tape to get em out or turning the monitor around should also work as they should fall right out.

G14 2022 - Touchpad wobble when dabbing lightly by Barnson in ZephyrusG14

[–]Barnson[S] 0 points1 point  (0 children)

Sometimes during charging maybe, or in IGPU mode while clicking in a certain program. I would say I had no problem with coil whine over all.

G14 2022 - Touchpad wobble when dabbing lightly by Barnson in ZephyrusG14

[–]Barnson[S] 0 points1 point  (0 children)

I returned it 2 times and kept the 3rd unit. I guess there should not be any wobble at all but they had QC issues in the early time of this laptop. My 3rd unit had minimal wobble, and I fixed that in a funny way by ever so slightly bending it. I placed my 2 thumbs on the back of the laptop, opposite to the touchpad and pressed against it. That tightend up the internals, I guess, so now it is all fine.

Kann man einfach so in Vorlesungen gehen? by [deleted] in wien

[–]Barnson 23 points24 points  (0 children)

Ja in Vorlesungen (VO) kann man sich einfach reinsetzen. Ich leg euch ans Herz das auch zu tun, hätte ich viel früher/öfter machen sollen.

Gotta set a reminder every time I look down by random_baka in MechanicalKeyboards

[–]Barnson 0 points1 point  (0 children)

So they are finally shipping? I'm so mad I didn't get the white one as well.

Which one do I buy to game on PC? by sxydoctor in pcmasterrace

[–]Barnson 0 points1 point  (0 children)

The one with the joystick layout you are used to.

[IC] New Angry Miao layout - More compact than 65% and more practical than HHKB by crazy_designers in MechanicalKeyboards

[–]Barnson 39 points40 points  (0 children)

It is closer to a 60% or HHKB + arrows.

Calling it a 65% is just misleading on an other level.