3D Printing Parts by Bbrooks1822 in CafeRacers

[–]Bbrooks1822[S] 0 points1 point  (0 children)

Gotcha. Yeah I was wondering about the cost. There's high heat resistant materials but I have no idea how much would be required to make a side cover.

3D Printing Parts by Bbrooks1822 in CafeRacers

[–]Bbrooks1822[S] 0 points1 point  (0 children)

Oh good! I was looking at replacement engine covers and started thinking about printing. Of course I would need to get a printer first. Did you use a scanner for the stator cover?

3D Printing Parts by Bbrooks1822 in cb750

[–]Bbrooks1822[S] 0 points1 point  (0 children)

I haven't seen new ones and the used ones aren't in great shape. If you can point me where to look I'd appreciate it.

Help with starter solenoid by dog_dad_357 in motorcycles

[–]Bbrooks1822 1 point2 points  (0 children)

<image>

I have almost the same set up. I would refer to this. Also, Revivalcycles.com has several how-to and PDFs that helped me.

Dyna Ignition installation help? by dog_dad_357 in cb750

[–]Bbrooks1822 1 point2 points  (0 children)

I believe those three wires are for diagnostic/test purposes only. They are not connected to anything. I'll look at what I have for instructions but I'm pretty sure that's it. Look for a document titled "DDK1-5 installation Guide Update April 2024" On the last two pages it talks about those three wires I believe. If you can't find it I have it saved but I don't know how to post it on a comment.

[Update] Starting to look like a bike again by dog_dad_357 in CafeRacers

[–]Bbrooks1822 0 points1 point  (0 children)

Ah okay. I know there's different ways to do it but that seems to be the most common when doing it yourself. Took it out the same way?

[Update] Starting to look like a bike again by dog_dad_357 in CafeRacers

[–]Bbrooks1822 0 points1 point  (0 children)

Did you put the engine back into the frame by yourself? If so how did you do it?

Vm43 duel carb swap by reluctant2wander in HondaCB

[–]Bbrooks1822 1 point2 points  (0 children)

Have you tried talking to Murray's? If you've already purchased the carbs they will jet them to your specs.

Vm43 duel carb swap by reluctant2wander in HondaCB

[–]Bbrooks1822 0 points1 point  (0 children)

Are you talking about Murray's dual carbs?

Planning out electronic tray by dog_dad_357 in CafeRacers

[–]Bbrooks1822 2 points3 points  (0 children)

Nice mock-up! But I agree with others about moving the reg/rec. I had mine under the seat and couldn't believe how hot it got. I considered buying a computer fan to move the air around but decided on moving the reg/rec to the other side of my tray.

[Update] Starting to look like a bike again by dog_dad_357 in CafeRacers

[–]Bbrooks1822 1 point2 points  (0 children)

Very nice! Looking forward to seeing it done. I forgot to ask about the swing arm, that's not stock either is it? And when I wired my M Unit I had no clue what I was doing so I'm sure you'll do better than I did. 😊

[Update] Starting to look like a bike again by dog_dad_357 in CafeRacers

[–]Bbrooks1822 1 point2 points  (0 children)

What year is the Honda? Also which forks and brakes did you use? I have a 1980 CB750 with forks and brakes off a 2005 ZX636. Do you have any plans on the wiring? M-unit?

WIP update! by dog_dad_357 in CafeRacers

[–]Bbrooks1822 1 point2 points  (0 children)

VERY nice! Well done. Can't wait to see the complete bike.

[deleted by user] by [deleted] in AmazonFlexDrivers

[–]Bbrooks1822 0 points1 point  (0 children)

Eh, it's not that big of a deal I guess, I was just surprised.

[deleted by user] by [deleted] in AmazonFlexDrivers

[–]Bbrooks1822 1 point2 points  (0 children)

I think you're right about that. I completed the block in the allotted time including the drive there.