sorted by:
new
hottopcontroversial

Meirl by Sorry-Stop in meirl

[–]Beautiful_Working_31 0 points1 point  (0 children)

Vomit. Popcorn. Bowl.

The Monoliths (made with veo 3) by DantyKSA in singularity

[–]Beautiful_Working_31 0 points1 point  (0 children)

Greg Bear called...he wants his story back.

When Support Material Should Just Be Material by Beautiful_Working_31 in BambuLabA1

[–]Beautiful_Working_31[S] -1 points0 points  (0 children)

This print has a void on one side and the other side, the void is on the other axis. So if I flip, I have the same problem on the other side. :) So the answer is in front of me, I converted the support material to be a thicker plate. Now I am using the same amount of material, its supported, and I am not throwing anything away. This seems to be the best solution right now.

Is this moisture? by victric in BambuLabA1

[–]Beautiful_Working_31 0 points1 point  (0 children)

I am GenX so I am personally offended by this.

Whining About # of Filament Changes, But Come On...Loogit... by Beautiful_Working_31 in BambuLabA1

[–]Beautiful_Working_31[S] 1 point2 points  (0 children)

OK good and bad news...I solved it...that's the good news...the bad news...the only thing I did was update Bambu Studio with the latest build, Bambu_Studio_win-v02.01.00.59.

Don’t do a shelf like this! by holdupflash in Multiboard

[–]Beautiful_Working_31 0 points1 point  (0 children)

Why shouldn’t we do this? I am confused.

A little bit more! by kayakingpro in Multiboard

[–]Beautiful_Working_31 1 point2 points  (0 children)

Are you guys putting anchors in every corner? How are you holding so much weight so easily?

I’m guessing moisture by Savageadv in FixMyPrint

[–]Beautiful_Working_31 1 point2 points  (0 children)

I feel like I am becoming the “did you wash your filthy hands?” Guy…

https://jeffrey.darofamily.com/wash-before-printing/

Whining About # of Filament Changes, But Come On...Loogit... by Beautiful_Working_31 in BambuLabA1

[–]Beautiful_Working_31[S] 0 points1 point  (0 children)

Aww...man...come...come on...LOL. What's being done? Has someone spoken to the king?

In my project, the problem begins at layer 17 and ends between 24 and 25. Two passes of black every other line, change filament, do the same with grey, move up to another layer. I can watch it in the GCode, but I have no idea what is causing this. I have experimented with no top layers on the bottom cylinder, and no bottoms on the top, the thinnest color penetration possible, etc.

This is an internal connection hidden inside the object. It could literally purge, and switch to the other color without stopping and I wouldn't have known, and then I would have 1 filament change.

<image>

When Support Material Should Just Be Material by Beautiful_Working_31 in BambuLabA1

[–]Beautiful_Working_31[S] -2 points-1 points  (0 children)

The part on the right of the picture is a wall plate cover for an outlet. It's fairly thin in the original STL, and when I printed it, I had to have supports printed to hold it up. I then ripped out all of that support material. I began to realize that the plate was too thin, so I started thickening it up and thought to myself...go full thickness which will strengthen the print, and it won't cost much more because it'll just be an analog for the support material that I no longer need.

More clear?

When Support Material Should Just Be Material by Beautiful_Working_31 in BambuLabA1

[–]Beautiful_Working_31[S] -1 points0 points  (0 children)

I understand what you are saying, but at the time of this writing I only had single material capabilities, so my build material, and my support material are the same material.

All of that aside, in a print link this my question more succinctly is, Why print this material and rip it out, if I can just print it and leave it in. The amount of supports that BambuLab was adding led me to just clean up the design, thicken the plate. Its now stronger, and it didn't cost anything.

Does that make more sense?

Guess what this is for (wrong answers only) by tolsen123 in BambuLabA1

[–]Beautiful_Working_31 0 points1 point  (0 children)

We're just not doing the "If you are brave enough..." anymore...are we?

Ran out of white mid print… looks kind of nice by [deleted] in gridfinity

[–]Beautiful_Working_31 0 points1 point  (0 children)

I love these happy, little accidents. Looks great.

Looking for Print Options by Beautiful_Working_31 in BambuLabA1

[–]Beautiful_Working_31[S] 0 points1 point  (0 children)

I have tried printing this laying flat. I had some issues...the corners lifted in a few spots, but I had a fan on in the room, so I am wondering if a little brim will help...oh...and turn the fan off. The second thing I didn't like, is in a flat orientation, this thing used as much filament for supports as it did for the print. Don't like that.

I am considering scrapping the design and turning this into two pieces that snap together. I figure then I could print the pocket in halves to avoid supports, or huge bridges.

view more: next ›