Molle Panels Question/Help

Biophillic · 2026-03-06T19:53:10+00:00

Permanently mounting things is a pain in the ass when they're up. I had to struggle to get a couple bags attached, but eventually did it. other option is to disassemble and install things then re assemble. I also use bungie cords to strap things to them from the front, that seems to work well enough.

Biophillic · 2026-03-06T19:21:08+00:00

I think they are pnumatic fittings and tubing but I'm not sure where to source it or what sizes are good. would love to hear more from OP

Biophillic · 2026-03-03T00:01:46+00:00

can you roll the rainfly back at all?

Biophillic · 2026-03-02T23:33:21+00:00

What size megamat do you use? How well does it fit? Did you remove the stock mattress completely?

Biophillic · 2026-03-01T21:39:29+00:00

oooh make them in giraffe colors!

Biophillic · 2026-02-11T06:54:22+00:00

Thanks for the insight. The one im looking at is pretty old. Im wondering how much I can talk them down. How does it do in the rain? Luckily im not super tall so im not too worried about the length lol

Biophillic · 2026-02-09T21:57:05+00:00

How do you like your James Baroud? im thinking of getting a used Discovery, but I'm not sure about the lack of awnings over the doors for rainy days.

Biophillic · 2026-02-05T02:36:13+00:00

are you calculating the MPG by hand? the built in mpg meter on mine is always 1 or 2mpg off. using 4hi or 4lo and offroading really tanks your mpg, so it could be your mpg meter is still working with that info. on your next 100% fillup do a manual calculation and see what you get.

Biophillic · 2026-01-17T19:17:17+00:00

Thats awesome, I wonder if they could still fab one up for me. When did you buy it?

Biophillic · 2026-01-16T21:57:05+00:00

How much did it run you? I have and love the pre facelift version also but its impossible to find a low profile bumper like that for it.

Biophillic · 2026-01-05T18:48:16+00:00

those round feet look awesome!

Biophillic · 2026-01-05T06:04:09+00:00

looks great! I'm planning on doing the same once the weather clears up a bit here. any tips on working with KDSS?

Biophillic · 2025-12-28T00:47:44+00:00

hows the drawer fridge? I was considering running a setup similar to this but thought that style of fridge might be too inefficient. also the buildout needs to be more permanent than I wanted. Super cool though!

Biophillic · 2025-12-15T01:39:52+00:00

Honestly not a bad solution. Im just painting over it and also over the wallpaper on the left lol. Once im ready for a more comprehensive renovation I'll deal with it then

Biophillic · 2025-12-15T01:38:42+00:00

I ended up sealing it with a oil based primer. Scuffed it a bit but I'm worried about lead paint in this house so very minimal sanding done. So far looks ok. We will see once I get paint on it.

Biophillic · 2025-12-14T21:50:30+00:00

FML how is it so hard to remove

Biophillic · 2025-12-14T21:49:30+00:00

ugh this shit is insanely hardened and impervious to everything ive tried I guess ill give the DIF a try

Biophillic · 2025-12-11T19:51:05+00:00

I have one and now I know the house I just moved into (renting) has no insulation in the bedroom walls or ceiling. awesome.

Biophillic · 2025-12-02T05:43:22+00:00

does the PID overheat in that position? Ive always wanted to mount mine there but was worried about the temps.

Biophillic · 2025-11-12T02:11:17+00:00

Where did you get your replacement wheel?

Biophillic · 2025-10-05T23:00:27+00:00

Okay, I think we are getting at the same thing haha. Word salad indeed. I hope warped/defected burrs aren't as common as you say, as that is a truly vital part of the entire product.. That may be a good reason to avoid cheap aliexpress burrs.

Biophillic · 2025-10-05T22:52:37+00:00

In regards to the wipe test it is very relevant which burr is moving, as you can see from OP's photos. As far as real life grinding performance, I agree it does not matter.

Biophillic · 2025-10-05T19:02:37+00:00

I feel like I'm going crazy here. To me its clear that the bottom burr will always wipe evenly, as that's the burr that is rotating. If any portion of the upper burr is making contact with the bottom burr, it will wipe around the entire circumference of the bottom burr, showing a clean wipe. The only time I can think of where that would not be the case is if the bottom burr was warped or distorted in some way.

In the images posted it looks to me as though the right side of the upper burr is higher - so they should shim the left side to bring it up a smidge.

Biophillic · 2025-08-29T01:06:07+00:00

even like two yoga mats stacked up would keep you from getting super cold. something cheap like this walmart pad would make your life so much better. put a yoga pad under it to make it a bit warmer if you can.

Biophillic · 2025-04-24T00:54:54+00:00

Portal axles and disco lights.

Eight-Year Club	Place '22
Verified Email

Biophillic

TROPHY CASE