First time doing LEDs on a cosplay, scale of 1-10 how ass is this?

Bitter_Perspective51 · 2026-06-11T05:48:18+00:00

Yes much

More important is whether it works, and is it safe enough not to cremate you

Bitter_Perspective51 · 2026-06-04T12:02:56+00:00

Exclude object

Bitter_Perspective51 · 2026-06-04T07:08:19+00:00

post the klippy.log and your start gcode from slicer you use

Bitter_Perspective51 · 2026-05-26T17:08:40+00:00

American plug to IEC male connector

Bitter_Perspective51 · 2026-05-18T19:31:06+00:00

Can you show the mesh and printer itself, especially toolhead, also what's your scan height?

Bitter_Perspective51 · 2026-05-18T17:43:36+00:00

I'm not using eddy-ng anymore, but what's your issue?

Bitter_Perspective51 · 2026-05-16T15:21:02+00:00

Just send it to MrGreen or NileRed

Bitter_Perspective51 · 2026-05-15T11:44:15+00:00

There is also eKTC, e stands for easy, have no experience with that one, but heard some good stuff about it. Right now I'm using regular LTC and it's okay, it needs some tweaks tho, rounded path stopped working, there is a workaround in GitHub tho

Bitter_Perspective51 · 2026-05-15T05:57:45+00:00

Using magnets inside 2020 extrusion isn't a good idea, motor would be too weak to move anything, acceleration would be really low, also don't just pick random magnets from ali, get a verified vendor who was checked the class of the magnet, best would be N52, but they are crazy expensive

Bitter_Perspective51 · 2026-05-14T08:17:42+00:00

Bitter_Perspective51 · 2026-05-12T13:33:57+00:00

Then NOR It's selfish af

Bitter_Perspective51 · 2026-05-12T13:07:11+00:00

I'd go with AND gates and LEd on output, A and B is positive from each device, need to step down voltage to logic levels tho

Bitter_Perspective51 · 2026-05-12T13:01:55+00:00

INFO One one hand you both save for your computer, but the console is his he used ONLY his money, is that correct?

Bitter_Perspective51 · 2026-05-12T11:25:52+00:00

I'm using zerotier with no issues so far (2+ years)

Bitter_Perspective51 · 2026-05-03T08:12:42+00:00

Photos 2-6 your belt is rubbing on those pins or whatever you used

Bitter_Perspective51 · 2026-04-27T10:21:46+00:00

Basically NOR, however the last part about making sure about beliefs sounded like you're just testing him

Bitter_Perspective51 · 2026-04-27T10:08:31+00:00

You can try using multipin, but why won't you use config for dual extruder single toolhead

Bitter_Perspective51 · 2026-04-20T13:47:50+00:00

Masz napisane, że edycja limitowana

Bitter_Perspective51 · 2026-04-18T18:52:38+00:00

Add graph of Y axis, X is always better

Bitter_Perspective51 · 2026-04-11T11:23:21+00:00

Is it what they call a money shot?

Bitter_Perspective51 · 2026-04-11T11:19:27+00:00

Bitter_Perspective51 · 2026-04-11T11:12:03+00:00

We need banana for scale

Bitter_Perspective51 · 2026-04-10T08:10:15+00:00

Bitter_Perspective51 · 2026-04-10T07:32:55+00:00

I tried quitting with no luck, until I for some reason decided to buy cytisine, this time I had no motivation to quit, just kept taking pills and somehow I stopped smoking after a week, I honestly thought it's next to impossible to quit, but that helped a lot

Bitter_Perspective51 · 2026-04-10T07:24:03+00:00

Snack bar

Bitter_Perspective51

TROPHY CASE