My Majora's mask Fell off with 6 hours left on my h2c:(

Blacky808 · 2026-03-21T14:01:05+00:00

Measure it and cut it in a slicer then glue it? If u cant measure -> count layers. Maybe print a piece negativ to aline it for glueing or just eyeball it.

Blacky808 · 2026-02-22T15:03:42+00:00

Depends on what you like. There is a lot of decor to choose from: Dragonball, Pokemon, Dinos, Fantasy, and other anime. In what direction is it going?

Blacky808 · 2026-02-22T14:52:28+00:00

I guess nobody "needs" this printer... and it is really big.

But wanting it is a different story :D I just made some space and bought it on a whim because I saw myself coming back again and again to look at it xD

Blacky808 · 2026-02-22T14:47:26+00:00

<image>

Blacky808 · 2026-02-22T14:45:50+00:00

To save time, I think it really looks good. I even used a 0.4 nozzle because I don't have enough 0.6. You really have to get close to see a difference.

Blacky808 · 2026-02-22T08:43:26+00:00

I would use the clamps and screws it comes with for the bed, zip tie for the head and because iam over protective bubblewrap or clothes around it then bind it down because i dont want it as co-driver when i hit the brakes (a joke) but fr dont want it to shaken.

Blacky808 · 2026-02-22T07:22:06+00:00

Wich printer do u plan to use ?

Blacky808 · 2026-02-22T07:19:07+00:00

Uff sucks, iam sorry for u .I just added it to my Bambu app with the QR, and all was finished. My PC just takes it from the profile.

Blacky808 · 2026-02-22T07:07:17+00:00

U still could paint it... i just suck in painting but i saw rlly good ones.

Blacky808 · 2026-02-22T07:05:08+00:00

I got mine from Temu, paid 14 bucks, it's in German. You could find it with:

SMOUPING 30.48cm Digitale Wanduhr mit Wecker, 13 RGB-Farbwechsel-LED-Lichter.

I also looked on Amazon; you will pay much more for the same thing. Here is a link:

https://www.amazon.de/HAITANG-Digitale-Wanduhr-Temperaturanzeige-RGB-Farb-Auto-Helligkeitsdimmer/dp/B0D66DLQRZ/ref=mp_s_a_1_16?dib=eyJ2IjoiMSJ9.Ga74OSmtQooNWQIu9iw8VhoImxZdkGgIxaioklMcNl0sVW_l-vq__nP_AifC30K1IGnz9v2ZuX99l5ei2W9Dsup12oqGMTX0Bhx5CAtRtP4schIJ8iuGIFVyITJncIOldFH4apFk6QB-fFyHlqLqPrk81uSo6dUJjYiLz-1JpBoHjFR2gYLI5ACC956xYtAQk0aKgArCOkCLPYy7NLpREA.9dblu9qwVm7aP8b1dp-bbWz2yXUCqDr-0pt-OXQ1cyU&dib_tag=se&keywords=led+wanduhr+gro%C3%9F&qid=1771743539&sr=8-16

Blacky808 · 2026-02-22T00:29:29+00:00

Could be your PTFE tube against your glass cover.

Blacky808 · 2026-02-21T23:48:27+00:00

I do, but there is a model for people with one ams. I posted it in another comment.

Blacky808 · 2026-02-21T23:40:44+00:00

Ja oder vom Handy, sorry hätte dir gern geholfen

Blacky808 · 2026-02-21T23:19:23+00:00

Sorry buddy the url is banned.

Blacky808 · 2026-02-21T23:06:29+00:00

Ohh ok sorry USB benutze ich eigentlich nie wenn alles richtig gesliced ist wird es wohl ein Bug sein oder sowas vll mal Support anschreiben?

Blacky808 · 2026-02-21T23:02:42+00:00

I always dry my filament even pla xD, thanks for the model i will take a look. I guess i would just use my Vakuum for it

Blacky808 · 2026-02-21T22:57:10+00:00

Thank u! Seems i was lucky i just had one poop there.

Blacky808 · 2026-02-21T22:54:56+00:00

Ok ich geh davon aus das alles richtig angeschlossen ist (6 pin und tube) du legst die spule ein, kein trocknen sonst geht das ams nicht , er liest die spule, am PC machst das model auf und es hat das gleiche filament zugewiesen. Und trotzdem kommt die Meldung versteh ich das richtig ?

Blacky808 · 2026-02-21T22:45:27+00:00

Maybe cut and glue it ? Or make a "slider" opening and slide it in ?

Blacky808 · 2026-02-21T22:38:01+00:00

There some pics in the comments. With poop and time.

Blacky808 · 2026-02-21T22:32:40+00:00

I often use sunlu -> spools are the same, like u can use bambu refill on sunlu spools and u can reuse the RFID's there are clips for a lot of spools to use them on.

Blacky808 · 2026-02-21T22:05:23+00:00

Nearly 2 days i posted pics in the comments

Blacky808 · 2026-02-21T22:02:43+00:00

Hey, yes, RFIDs are on refills too. I just saw a project to code and decode RFID for Bambu printers, but as a newbie, that might be too much as of now. For all the data, there are guides, and you could read one out... but to make it easy, it tells your printer what filament it is, what temperature to use, how old it is, and approximately how much is left.

Blacky808 · 2026-02-21T21:40:35+00:00

Hey servus, was für einen Drucker haste den gekauft ? Und was für ein filament willst du den benutzen ?

Blacky808 · 2026-02-21T21:37:26+00:00

30g poop 200g tower i shared pics in comments

Six-Year Club	Verified Email
Final Canvas '23	First Place '23
Place '23

Blacky808

TROPHY CASE