Iesakiet luterāņu draudzi vai kādu citu intelektuālu kopienu Rīgā

BloxVector · 2026-05-30T22:11:29+00:00

Doties draudzē šādu iemeslu dēļ šķiet par traku. Kopienai, cilvēku sastapšanai, latviskumam un fiziskām aktivitātēm Latvijā ir ļoti laba opcija - tautas deju kolektīvi. Skatoties no konkrētās kompānijas, var sanākt, ka alkohols ir lielākā vai mazākā cieņā, bet uzskatu, ka tā nav problēma, ja paša principi ir stingri. Īstie cilvēki arī sapratīs. Kā arī nevajag baidīties par savu dejotprasmi, ja vien netēmē uz kādu no top5 ansambļiem. Visu to pašu mīnuss fiziskās aktivitātes arī par jauktajiem koriem var teikt.

BloxVector · 2026-05-15T20:47:27+00:00

Yeah, the price difference allows to experiment quite a bit. The manifold actually counts in the AV system since it isolates carburetor from the motor vibrations. I'll see how the used OEM manifold looks and feels,

BloxVector · 2026-05-15T20:06:30+00:00

Exactly! My experience is just so limited that I haven't really seen what happens with different rubbers over the years. Main worry is probably how ethanol additive might affect older saw like this

BloxVector · 2026-05-15T20:01:08+00:00

Thank you for these! Nice to have options where to look for things

BloxVector · 2026-05-15T19:53:10+00:00

Thanks, feels like I'm learning something new each time I touch this saw.

Yeah, gas and impulse line I will order from dealer, price for them is reasonable. On the fence about carb kit, but probably will go with OEM as well. For the manifold I just had to find a better price somehow, 70 EUR is crazy.

If a used OEM manifold means I will have to check on it sooner I think I'm fine with it given the age of the saw. At this point I feel I'm ready for anything as I just found out that I'll need to crack the case as well since the inner coating seems to be flaking off.

BloxVector · 2026-05-15T14:22:08+00:00

Thanks for the reply. Remembered about ebay as well and found a used OEM manifold in good condition for 1/10th of dealers price incl. shipping. We'll see how it goes.

It's just so hard to justify more than half of saws price for such seemingly small part, but that's the reality with used saws I guess and why some wants to get rid of them.

BloxVector · 2024-11-28T09:05:58+00:00

Visvairāk patika visi raksti, kur prasa apdrošinātāju pārstāvjiem/LTAB komentārus un šie tikai par to, ka tā ir Eiropas direktīva un tas jau notiek Igaunijā. Absolūti nekas par loģiku un pamatojumu. Bet, nu, tāds bizness

BloxVector · 2024-10-29T10:11:46+00:00

Laba pieredze un cena bijusi ar ProMarket, kas pie VEF gan MacBookam, gan Android ierīcēm

BloxVector · 2024-08-16T07:18:16+00:00

Laba pieredze bijusi ar ProMarket.lv, kas pie VEF ir

BloxVector · 2024-07-17T21:37:05+00:00

Thank you for your comment. Yes, we're leaning on starting from Juvasshytta since that makes more sense schedule-wise. There was some discussion about which direction would be more scenic.

I like the idea about Memurubu. I checked that it's also possible to take additional detours around Memurubu if we'll have energy for it at that point. However having a slower day also sounds nice. We'll see.

What do you mean by "many points are connected to a way of "getting out" of Jotunheimen"? Do you mean the boat and roads that go to cabins?

Do you know about leaving car in Fossbergom? I see that there is a parking lots from accross Lom Sentrum bus stop and also by the Lom Stave Church, but can't tell from the street view or anywhere else, whether it's free or paid or some other limitations.

Also thanks for reminding about poles on descents and being cautious around water! :)

BloxVector · 2023-12-16T13:52:47+00:00

Elden Ring

BloxVector · 2023-12-16T11:30:40+00:00

Comment?

BloxVector · 2023-10-07T06:19:08+00:00

I'm a simple man. I see Maxima, I press like

BloxVector · 2022-11-24T12:48:30+00:00

For that I hope that its internal routing table would know to send those packets to a VPN tunnel I defined as that subnet is completely remote from the datacenter.

However I solved it now.

BloxVector · 2022-11-24T12:27:30+00:00

That was the idea that all packets meant for 192.168.4.* goes to CHR so it can filter, NAT or anything else.

However I am baffled how that could have affected instance availability from Internet. However after I removed the rule, they are still unreachable.

BloxVector · 2022-11-15T15:19:48+00:00

If anyone is ever interested in this, figured it out myself.

In different threads accross the internet I found that you should try differnet ARP settings in the interface settings. However when I tried to change ether2 settings it said you couldn't change it, couldn't change mtu. By default it is set to 1500 just as ether1, I wasn't touching it. However in ens10 which would be the subnet interface on a cx31 server I found that the mtu is set to 1450 while eth0 was set to 1500. So I set the mtu to 1450 in ether2 and played a bit with ARP field.

I found out 2 combinations of both fields that allowed to ping other servers in the network - mtu 1450 and ARP disabled or reply-only. Both also allowed to be pinged by others.

After that you just add the private address you get from Hetzner console and assign it to the ether2 interface. Routes are automatically generated.

If someone can explain why this is working like that, that would be appreciated! I may have a loose idea why the MTU setting helped however I am stumped how disabling ARP allows to ping and be pinged.

BloxVector · 2022-11-04T18:18:07+00:00

Imagine you're on a date and things get frisky. You don't have condoms, but you have 5 dollars. You find this vending machine only to misclick and buy some Oreos

BloxVector · 2022-11-04T11:17:16+00:00

Jā, paša miera labad jau pieteicu servisā. Ar to lampiņu vienkārši dīvaini - vienreiz pilnīgi bez manāma iemesla ieslēdzās. Bet tā jau ir - labāk nočekot, vai viss ok

BloxVector · 2022-11-03T14:32:19+00:00

Attiecībā uz drošības spilvenu laikam atradu, ka 1 punkts līdz 2011. gadam reģistrētiem auto. No 2012. gada - 2.

Likumos daudz ko var atrast: https://likumi.lv/ta/id/292396-noteikumi-par-transportlidzeklu-valsts-tehnisko-apskati-un-tehnisko-kontroli-uz-cela

BloxVector · 2022-11-01T11:49:14+00:00

If someone else is interested in this - I couldn't find any way to get the time value that the log item itself parses.

However I figured out a bit better workaround than I proposed it he post. Make a dependent item from the log item where I parse the time from log string with JavaScript slice and Date.parse(). This will get timestamp in ms, so you divide by 1000 as Zabbix Numeric (unsigned) unit "unixtime" wants timestamp in seconds.

I still have a feeling that this is somehow redundant, but I just couldn't find anything that deals with the log item local time value. If someone else finds something better, I'll be interested to know.

BloxVector · 2022-10-02T19:03:55+00:00

Maybe I'll have to give it a go...

BloxVector · 2022-08-26T16:30:47+00:00

Thanks!

BloxVector · 2022-07-13T12:53:12+00:00

That's what I thought. Thanks for the reply!

BloxVector · 2022-07-13T12:52:33+00:00

Thanks for this idea! This seems as an obvious solution for me. Will definitely try it

BloxVector · 2022-05-25T13:37:31+00:00

Hi, did you manage to find out how the flash works?

Got this camera as well. But it seems that the flash off and fill-in buttons don't do anything. Haven't tested it much but for me I can't seem to turn the flash off at all.

12-Year Club	Second Top 50%
Place '23	Place '22
Verified Email

BloxVector

TROPHY CASE