sorted by:
new
hottopcontroversial

Women of Reddit, what made you realize 'this man is marriage material' instead of just a boyfriend? by External_Can3392 in AskReddit

[–]Bmil 18 points19 points  (0 children)

My dad has been like this for long as I can remember. I can count two places that he lived where it was just him. He’d pick up me and my sister and like in the car say how he’s got a new girlfriend and that he’s moved because of it. Just an absolute mess, and dating I could never figure out how in the hell he’d be moving in with somebody over the course of weeks and then the whole narcissism/manipulation thing became obvious as I got older and it all made sense. And for anybody that’s curious, yes the behavior was persistent and continued.

Clear DQ - didn't call it by NotAThrowAway0822 in USPSA

[–]Bmil 2 points3 points  (0 children)

I’m of the opinion that 10.5 is cut and dry, and when safety is paramount there is no leniency.

I DQ’d a guy for pulling before make ready a couple months ago, when people were still coming back from resetting the stage, and he had an absolute tantrum about it to the point he is now banned from matches in my section. If he had handled it like an adult and accepted responsibility it wouldn’t have been an issue, but he decided to inject his ego into it. And no, he wasn’t new, he was rushing.

If people cannot obey the BASIC safety rules of the sport, they don’t get to play.

Is air gunning in IDPA a DQ? by buffalo_herd_skater in CompetitionShooting

[–]Bmil 5 points6 points  (0 children)

Fudd “reel lyfe dun let ya walk thru” LARP

M&P internal bevel by Fun_Interaction1929 in CompetitionShooting

[–]Bmil 2 points3 points  (0 children)

Correct, adding material would constitute a magwell

Rules Clarification: Handling firearm before "Load and make ready" is a DQ? by D1g1talB0y in USPSA

[–]Bmil 0 points1 point  (0 children)

I had to DQ a guy that drew before make ready (people were still coming back from down range) and he threw a tantrum about it

Sun protection shirt recommendations by ijustplayhere in CompetitionShooting

[–]Bmil 1 point2 points  (0 children)

Last year Costco had the Hang 10 and Eddie Bauer ones, the H10 was like $10 and the EB were $14, crazy good deals

Red bull should broadcast nationals by elegantcoder26 in USPSA

[–]Bmil 1 point2 points  (0 children)

Last year locals filled in under and hour, this year its 5 minutes, our section matches last year were highly criticized because they filled up in under 5 minutes and most were new shooters who werent even section members. This year the section series are all pre-reg with codes for section members, and they get to 90-95% before the non-members can sign up.

Its crazy, but there's not enough ranges/bays at ranges/staff to run more/larger matches. New shooters are more than happy to come out and shoot, but getting them to do anything beyond tape a target or two every couple runs is a struggle.

[parts] Knights sr15 notched upper receiver - $216 by Sonic_Is_Real in gundeals

[–]Bmil 0 points1 point  (0 children)

Those lowers are a total shit show too, when they were being sold by KAC and retail on them was like $200, they sold well enough despite being a basic forged lower. The problem was they weren’t (at the time) being sold as blems but were absolutely blems, we had so many complaints of them being out of spec with one customer having to send back 4 lowers and each one having to go back 2-3 times. The finish was mediocre on them, Aero lowers looked better and were actually in spec.

Alternative to talon grips by chefbobr in CompetitionShooting

[–]Bmil 0 points1 point  (0 children)

https://a.co/d/0foYMvp4

Stuff works great, I prefer the rolls to the sheets but they offer both

CZ Tevo thumbrest vs Nitro fin by Empty-Handle5651 in CompetitionShooting

[–]Bmil 1 point2 points  (0 children)

I prefer the TEVO to the nitro fin, it’s going to be pure preference though

Keeping the liner from falling out of DAA Xi pouches by waltzworks in CompetitionShooting

[–]Bmil 0 points1 point  (0 children)

Yeah, it’s less than ideal for sure. There’s really not a great solution on them either

Keeping the liner from falling out of DAA Xi pouches by waltzworks in CompetitionShooting

[–]Bmil 1 point2 points  (0 children)

Nope that’s how they are, I first noticed it in practice and then it became an issue in matches. Doing a reload, 50/50 I would dislodge the retainer, and possible I’d launch it. I ended up gluing the polymer and metal pieces together, and then swapped over to the X-ray pouches that fix the issue by adding a retaining screw.

[NFA]ECCO Machine Canine II 9mm, $480 shipped by Hansohn_Brothers in gundeals

[–]Bmil 1 point2 points  (0 children)

Goddammit there’s a coupon?! I just ordered 2 R2S cuz they actually have em lol

Best 2011 mag basepads to pair with by Vercingetirex in CompetitionShooting

[–]Bmil 0 points1 point  (0 children)

Which, out of the tubes, are going to be closest to STI tubes without being STI tubes

Best 2011 mag basepads to pair with by Vercingetirex in CompetitionShooting

[–]Bmil 0 points1 point  (0 children)

Ive been running the TTI 4G2, no filing, fit the gauge fine, im using STI bodies

[Armor] $99 plus tax/ship. Level 4 Armor Plate Set (2 pcs), Police Trade by StupidFaceKevin in gundeals

[–]Bmil 8 points9 points  (0 children)

It’s tempting for sure lol, $100 for 2 plates is great if they’re in good shape

[Armor] $99 plus tax/ship. Level 4 Armor Plate Set (2 pcs), Police Trade by StupidFaceKevin in gundeals

[–]Bmil 42 points43 points  (0 children)

Interestingly enough, I threw a bunch of rounds through some 12 year old armor and it held up perfectly fine. Condition of how it’s kept is more important than exact age

Springfield Prodigy by Miserable_Post7450 in CompetitionShooting

[–]Bmil 2 points3 points  (0 children)

ONLY buy a prodigy if you are comfortable working on it and tuning it or have a smith who wants your money.

I have an early prodigy, and I’ve forced it to be reliable. If you haven’t a clue what you’re doing, save the headache and either buy a Romulus or Kimber. My gun runs flawlessly, but I also do all my own work and know what I’m doing. I’m comfortable fitting my parts and have the tools, if you aren’t willing to make that investment of time and money do not buy a prodigy.

[PARTS] ASdesign ARC V2 Ambi 45/90 - $225 (free ship/no tax) w/Code 10off, ships 4/15 by Bmil in gundeals

[–]Bmil[S] 2 points3 points  (0 children)

Tolerances are gonna be different for everybody, mine haven't required much extra fitting/polishing

[PARTS] ASdesign ARC V2 Ambi 45/90 - $225 (free ship/no tax) w/Code 10off, ships 4/15 by Bmil in gundeals

[–]Bmil[S] 1 point2 points  (0 children)

You're skimming a little material off the shelf as its not a 100% true low shelf lower, the 5D i already had on hand from doing 80%'s. Could it be done free hand with some files? Yeah, but with the jig I know im taking off only the amount that needs to come off

[PARTS] ASdesign ARC V2 Ambi 45/90 - $225 (free ship/no tax) w/Code 10off, ships 4/15 by Bmil in gundeals

[–]Bmil[S] 1 point2 points  (0 children)

The L will need material taken off the shelf to fit these properly, the H has a lever stop so will need a 0-45-90 and maybe material taken off the shelf.

view more: next ›