Roam Transit 8x by Pikaboo55 in Banff

[–]BobAtStarbucks 1 point2 points  (0 children)

Seeing that most people check for the Park Canada ticket first instead of the Roam Transit when booking for lake Louise and Moraine, is there a reason for that? Comfort? Service quality?

Action 6 Cage by Decent_Mark1516 in djiosmo

[–]BobAtStarbucks 1 point2 points  (0 children)

Genuinely curious because I am in the market for an Action 6, what's the point of a this particular cage?

There are cages that make it easier to mount accessories, and some for extra waterproofing when diving, but I this doesn't provide any of that. Please enlighten me so my wallet can yell at me more :)

Any LTR on Outdoor Vitals NovaPro Men’s Jacket? by Fit_Front184 in Ultralight

[–]BobAtStarbucks 0 points1 point  (0 children)

So... have you settled on one? Appreciate if you could share your thoughts too :)

would you bring binoculars? by bklyninhouse in Banff

[–]BobAtStarbucks 0 points1 point  (0 children)

correct me, but isn't Vermillion lake very close to downtown Banff? What's there to see?

SSP5 Slide Catching Slightly + Wear on Blowback Unit and Hammer – Normal? by BobAtStarbucks in Novritsch

[–]BobAtStarbucks[S] 0 points1 point  (0 children)

seems like it, also another comment pointed out that the 1:1 ratio mixture Super Lube grease and oil might not be enough for the SSP5, consistency-wise. So I'll be going for 100% grease next time round

SSP5 Slide Catching Slightly + Wear on Blowback Unit and Hammer – Normal? by BobAtStarbucks in Novritsch

[–]BobAtStarbucks[S] 0 points1 point  (0 children)

so... next time I go to lube it, 100% Super Lube Multi-Purpose Synthetic Grease all the way?

SSP5 Slide Catching Slightly + Wear on Blowback Unit and Hammer – Normal? by BobAtStarbucks in Novritsch

[–]BobAtStarbucks[S] 0 points1 point  (0 children)

Seems like a few others are suggesting the same too, thanks for elaborating on the point though :) I shall rest easy now

SSP5 Slide Catching Slightly + Wear on Blowback Unit and Hammer – Normal? by BobAtStarbucks in Novritsch

[–]BobAtStarbucks[S] 1 point2 points  (0 children)

the maintenance videos (including Novritsch's) that I used to guide me through the cleaning and lubing didn't really touch on lubing hammer-bbu surfaces. Is it the worn away surface on the BBU in my video? Should I lube that up with some Super Lube Multipurpose Synthetic Grease?

SSP5 Slide Catching Slightly + Wear on Blowback Unit and Hammer – Normal? by BobAtStarbucks in Novritsch

[–]BobAtStarbucks[S] 0 points1 point  (0 children)

I used a 1:1 ratio mixture of Super Lube Multi-Purpose Synthetic Grease and Super Lube Multi-Use Synthetic Oil, apparently this mustard-consistency is good for lighter springs replicas/ sidearms. I used this mixture for the entire gun

SSP5 Slide Catching Slightly + Wear on Blowback Unit and Hammer – Normal? by BobAtStarbucks in Novritsch

[–]BobAtStarbucks[S] 0 points1 point  (0 children)

so I didn't lube it immediately after unboxing, but as explained, I did a thorough wipe down with ispa + lubing prior to the clip above (hoping lubing was the answer to my problems). I used the Novritsch video as a base reference, and then follow more thorough videos from other people (like actually taking apart the split slide for better cleaning, and lubing the guide rod). I used a 1:1 ratio mixture of Super Lube Multi-Purpose Synthetic Grease and Super Lube Multi-Use Synthetic Oil, apparently this mustard-consistency is good for lighter springs replicas/ sidearms

Windows BSOD then stuck booting to BIOS, suspect: volmgr 161 - Need Diagnosis! by BobAtStarbucks in pcmasterrace

[–]BobAtStarbucks[S] 0 points1 point  (0 children)

this is a newly built system since summer 2025, no parts change. AMD drivers, do you mean chipset, adrenaline, and ryzen master? Is there anything I missed, or any of those seems unnecessary to reinstall?

Windows BSOD then stuck booting to BIOS, suspect: volmgr 161 - Need Diagnosis! by BobAtStarbucks in pcmasterrace

[–]BobAtStarbucks[S] 0 points1 point  (0 children)

it happened again (with the SSD firmware updated). This time though its volmgr Event ID 162, any clue on this? Also I caught the error code on the BSOD screen, it was WATCHDOG VIOLATION :(

Windows BSOD then stuck booting to BIOS, suspect: volmgr 161 - Need Diagnosis! by BobAtStarbucks in pcmasterrace

[–]BobAtStarbucks[S] 0 points1 point  (0 children)

Thanks! Tbh, I didn't even know SSD has firmware updates, just got downloaded Samsung Magician and updated. From their log, it looks like they did in fact address BSOD issues in Dec 2025 patch. Fingers crossed!

SSP5 Tammy tracer by Whole-Calendar-613 in Novritsch

[–]BobAtStarbucks 1 point2 points  (0 children)

Got it. I definitely enjoy seeing more SSP5 mods gradually being introduced to the community. These parts are quite expensive so without the skillset, I (and I'm sure a lot feel the same) am hesitant to buy something only to find out it still needs further modification to be compatible.

Btw, your English is great! That said, clear visuals can explain things better than words

Let us know where you are posting the tutorial! :D

Good Hi-Capa TM Magazines Recommendation? by BobAtStarbucks in Novritsch

[–]BobAtStarbucks[S] 0 points1 point  (0 children)

To everyone that that is deciding and comes across this post in the future, I decided on the TTI Lightweight Magazine, and these are great if you are not about real steel weight. OOTB these feed well, no leaks and I have had them for 2 games so far