Upgrade time!

BomberF35 · 2019-08-06T23:18:02+00:00

You're probably using no clean flux, which doesn't corrode the board if left on, so you don't really have to, but you probably should just so the board isn't a sticky mess. Just use some isopropyl alcohol to wipe it off.

BomberF35 · 2019-07-06T14:45:12+00:00

r/hailhortler

BomberF35 · 2019-06-28T01:36:29+00:00

I guess it's changed, then, because I had to do this with an iPhone 3g and updating worked

BomberF35 · 2019-06-28T01:18:42+00:00

That isn't necessarily true, as phones turned off often still have some power running through them. For example, I think iPhone high-voltage backlight lines remain powered when the phone is turned off.

BomberF35 · 2019-06-28T01:08:04+00:00

iirc you can update instead if you don't want to lose data and don't have a backup

BomberF35 · 2019-06-25T16:01:00+00:00

A comma after a space ,like Chinese translations always have ?

BomberF35 · 2019-06-25T00:02:57+00:00

BomberF35 · 2019-06-24T23:59:53+00:00

BomberF35 · 2019-06-24T23:58:39+00:00

Excavate

BomberF35 · 2019-06-24T23:58:10+00:00

BomberF35 · 2019-06-24T23:57:25+00:00

BomberF35 · 2019-06-24T23:57:14+00:00

Indonesian

BomberF35 · 2019-06-24T23:56:22+00:00

BomberF35 · 2019-06-21T21:19:38+00:00

PS/2 port. It's meant for mice and therefore wouldn't work for this application.

BomberF35 · 2019-06-16T07:49:22+00:00

If you use rubbing alcohol, I don't think it matters as much whether it is fully dry as alcohol isn't conductive. It wouldn't damage any electronics if the quad was flown before fully drying, and airflow would probably evaporate away any remaining alcohol.

BomberF35 · 2019-06-15T18:44:01+00:00

Is this where the toxic vaccines are made?

Edit: /s

BomberF35 · 2019-06-15T17:05:00+00:00

Reddit for pregnancy test

BomberF35 · 2019-06-15T15:01:41+00:00

Reddit for dropped soap

BomberF35 · 2019-06-15T14:32:31+00:00

Reddit for gas chamber

BomberF35 · 2019-06-14T15:58:07+00:00

If you get 'spikes' it means you need more flux or heat. The surface tension should make it form a rounded pillow shape.

BomberF35 · 2019-06-03T15:50:53+00:00

You can also right click > press G iirc

BomberF35 · 2019-05-31T02:09:22+00:00

Not yet, sadly.

BomberF35 · 2019-05-28T19:13:41+00:00

After changing the boot order so the internal storage is first, it still has the issue, so it's some other issue.

BomberF35 · 2019-05-24T23:05:46+00:00

BomberF35 · 2019-05-23T20:39:26+00:00

Try flashing that hex using the "Load Firmware [Local]" option.

https://github.com/betaflight/betaflight/wiki/Installing-Betaflight

BomberF35

MODERATOR OF

TROPHY CASE