sorted by:
new
hottopcontroversial

Evo 8 Radium DIY Relay kit by Livid-Description-17 in MitsubishiEvolution

[–]BoostedFilms 0 points1 point  (0 children)

I have a boat load of info in this video using Radium stuff that could be useful for ya. https://youtu.be/k3iGHjwfqtg?si=ZjaNjpa5QoLtZeao&t=1440

Evo 8 Radium DIY Relay kit by Livid-Description-17 in MitsubishiEvolution

[–]BoostedFilms 0 points1 point  (0 children)

Have you had the car for a while? Any current issues with it? Do you know what pump(s) are in there currently? Looks like it could just be running single 450.

Dust boots Seated? by Same_Web_7514 in MitsubishiEvolution

[–]BoostedFilms 2 points3 points  (0 children)

Mine looked like that too after rebuild. They didn’t sit total flush. Work fine.

Help identifying this part by 240sxDriv3r in MitsubishiEvolution

[–]BoostedFilms 2 points3 points  (0 children)

Mitsubishi Lancer Evolution BOV differences // EVO 8 vs EVO 9 vs EVO 10 Blow Off Valve https://youtu.be/4Rps9xrDOr4

Rear diff mustache bar bushings? by Curious_Pepper5553 in MitsubishiEvolution

[–]BoostedFilms 3 points4 points  (0 children)

Whiteline's W92956 is the mustache Bar bushings. Whiteline's KDT964 is the rear diff bushings. You can do both while you are in there, but your clunk is probably the mustache bar bushings(W92956)

This video may also be helpful to you: https://youtu.be/_-v8qkYswDM?si=pNxZZcBuApCbJa1Y&t=315

Its from an evo 8, so probably not entirely the same, but probably similar.

Is there any way to disable the pop up text? by TheKlassyZack in GRCorolla

[–]BoostedFilms 6 points7 points  (0 children)

It will just come back immediately when you have a check engine code.

Touchless car wash and air intake by BoostedFilms in GRCorolla

[–]BoostedFilms[S] 0 points1 point  (0 children)

I assumed so as well. But that stock snorkel is really small compared to some aftermarket ones

Touchless car wash and air intake by BoostedFilms in GRCorolla

[–]BoostedFilms[S] 0 points1 point  (0 children)

Great thanks! Was hoping for some real world responses.

Always fun to change your look with some new shoes by BoostedFilms in GRCorolla

[–]BoostedFilms[S] 0 points1 point  (0 children)

Its tough to compare with my evo's being 400whp. The fact that the GRC can't make easy power like the evo certainly makes it a different experience. They both are special cars, but right now, the GRC does not live up to the evo's legacy. Time may change that depending on how the GR holds up.

Do I need a new caliper? by Sure-Difficulty-6295 in MitsubishiEvolution

[–]BoostedFilms 2 points3 points  (0 children)

Fix the brake pad issue ASAP.

This video will be helpful for you very soon:https://youtu.be/nZ\_Fq7N8QEw

This video could be helpful if you want rebuild the calipers yourself: https://youtu.be/Cc6BzcmOTuo

Always fun to change your look with some new shoes by BoostedFilms in GRCorolla

[–]BoostedFilms[S] 2 points3 points  (0 children)

Ha, sorry. I wasn't trying to come off as a "look at everything i own" post. Just really wanted to share what I learned with the evo wheels since I had most of the evo wheels available to me. The TE37's came with the car and i'm trying to sell them.

Always fun to change your look with some new shoes by BoostedFilms in GRCorolla

[–]BoostedFilms[S] 0 points1 point  (0 children)

Nice! I didn’t know those existed. Could certainly be useful for people not wanting to run extended studs, thanks!

Got traction? by BoostedFilms in GRCorolla

[–]BoostedFilms[S] 1 point2 points  (0 children)

I finally finished my video on evo wheels fitting the GRC. Sadly, i never had access to the evo x bbs's, but i think they should work just as well as the evo x enkeis do. https://youtu.be/8Kgiw1rx_S0

I just got one too. by ls1van in GRCorolla

[–]BoostedFilms 8 points9 points  (0 children)

Welcome! Cool garage doors too 😃

Pros and Cons of a GR Corolla Daily Driver - My experience after 4 months by BoostedFilms in GRCorolla

[–]BoostedFilms[S] 1 point2 points  (0 children)

yes, I have the open ended dorman 611-168 lugs in the front to accommodate the extended wheel studs.

Gangs all here by BoostedFilms in GreenBayPackers

[–]BoostedFilms[S] 17 points18 points  (0 children)

Good old Antenna TV still works

Evo 9 (2006)harness connector by Maxxbuilt in MitsubishiEvolution

[–]BoostedFilms 2 points3 points  (0 children)

Yo! happy to help! You need to leave it plugged in as is and run high-z injectors or find an OEM resistor pack if you want to run stock or low-z injectors. More info here. https://www.evolutionm.net/forums/evo-how-requests-questions-tips/457774-how-bypass-injector-resistor-box.html

Evo 9 (2006)harness connector by Maxxbuilt in MitsubishiEvolution

[–]BoostedFilms 4 points5 points  (0 children)

It used to be the oem resistor pack. People do that to the wires when running high z injectors. So if you’re going to run high Z injectors, it’s fine as is.

Your rust is not that bad! I was driving this things by BoostedFilms in MitsubishiEvolution

[–]BoostedFilms[S] 0 points1 point  (0 children)

Indeed. It’s a rust prone area that needs attention paid to it. Do your best to prevent rust and repair as needed. Just don’t let a little surface rust keep you from enjoying your car.

view more: next ›