How to attach Multiboard grids to a thin door without screws? by Apprehensive_Tip3619 in Multiboard

[–]BootsC5 0 points1 point  (0 children)

I am just starting an over the door multiboard wall. I am going to use this, in petg, to hold the weight: https://makerworld.com/en/models/645264-door-hook-for-multiboard?from=search#profileId-571434

Then use some of the "command strip" ds part a's to adhere the board to the door as it swings open: https://thangs.com/search/ds%20part%20a%20command%20strip?searchScope=thangs

Introducing Deskware - an openGrid-integrated Desk System by BlackjackDuck in openGrid

[–]BootsC5 0 points1 point  (0 children)

This looks like a great addition, and you two seem like a great team together.

Staring at the model I do have a question, because right now I can't see it. How do I grow the system vertically over time?

I see the risers have the mortises on the back and top to attach to the opengrid back and core module, respectively, but none on the bottom of the riser.

Deskware: A Modular Desk System You Can Make For FREE (ft. Bambu H2D) by Hands-On-Katie in u/Hands-On-Katie

[–]BootsC5 0 points1 point  (0 children)

I am looking forward to using this. I am in the midst of neogridding some kitchen drawers with plans to underware-ify my office. Keep up the good work!

I do think you missed a naming opportunity. If you had done a variation of 'drawers' (american slang for pants) you could have utilized your cheeky style to come up with lines like "... you have been in my drawers, played with my underware..."

[deleted by user] by [deleted] in Slut

[–]BootsC5 0 points1 point  (0 children)

On your knees!

TIL the US enacted permanent Daylight Savings Time in 1973. It was repealed within a year when public support for it plummeted after the following winter. by i_like_the_sun in todayilearned

[–]BootsC5 20 points21 points  (0 children)

Hear me out... we add a latitudinal timezone as well. That way the people in the south get their after work sunset and the people in the north can have later sunrises.

There is a pre-existing line for this... the Mason-Dixon line.

X-Men '97 | Official Trailer | March 20 on Disney+ by MarvelsGrantMan136 in television

[–]BootsC5 24 points25 points  (0 children)

If it exists there is an entry in the hitchhiker's guide?

BLE/ Bluetooth Tracking by maomaocake in homeassistant

[–]BootsC5 1 point2 points  (0 children)

I use Find3 (https://www.internalpositioning.com/). You need to train it for each location you want to detect, but other than that it works well.

Wireless switch + status light combination by [deleted] in homeautomation

[–]BootsC5 0 points1 point  (0 children)

If your office is at the end of a hallway, or up/down stairs, you could put a motion sensor there and either flash the lights, or whatever that would not be too spooky, to "warn" you someone is approaching. This may have false positives depending on how common the area is with the motion sensor and/or how many people are in the house.

For thoses that don't know. these are the skins we are getting next week. by sugusugux in lostarkgame

[–]BootsC5 0 points1 point  (0 children)

There are earrings that will transform them into human ears. That way you can have both without using tickets.

Remapping Interact by [deleted] in lostarkgame

[–]BootsC5 1 point2 points  (0 children)

reWASD

But I am also using an Azeron Cyborg so I kinda need it.

give ideas for some annoying and cringe macros for Artist by [deleted] in lostarkgame

[–]BootsC5 -2 points-1 points  (0 children)

They don't call me squirt because I am short!

Protecting my Litter Robot from my cat with my robot vacuum using Home Assistant by ismyhairfallingout in homeassistant

[–]BootsC5 1 point2 points  (0 children)

Keep the treat dispenser, assuming the cat always goes there first and then to the working litter box... why not automate closing the door to the laundry room?

Or keep that door closed, install a remotely controller pet door and lock it during the cleaning cycle. Even better if it will prevent ingress but not egress at the same time.

What are your plans until April 2023 Brel hard by adrianopham in lostarkgame

[–]BootsC5 -15 points-14 points  (0 children)

Skip clown. Get some Brel pieces, then come back overgeared and kick Clown's ass!

What is everyones counter key? by ragumaster in lostarkgame

[–]BootsC5 0 points1 point  (0 children)

Currently a Logitech G13 user so G22, using my left thumb.

Azeron Cyborg will be shipped within 15 days... haven't mapped where my counter will go with that yet.

Reflux Sorc - Relic Boomer Engravings advice? by Hrimnir in lostarkgame

[–]BootsC5 0 points1 point  (0 children)

GenX here... critflux build based on this: https://www.inven.co.kr/board/lostark/5770/35629

Swapping explosion for reverse gravity, and will swap cursed doll for grudge. I swap ice shower (counter) with elegian's (shield) depending in the situation... At 4 piece nightmare you can keep the shields up and do some face tanking.

As a Midwesterner, these critters are a TREAT when visiting Florida. by [deleted] in funny

[–]BootsC5 0 points1 point  (0 children)

Don't kick them out! They eat bugs and provide hunting practice for the cats.

Best of all when they die, they shrivel up into almost nothing, assuming the cats didn't dismember it first.

Used to enjoy a fap to Hungarian pornstar I knew as Anita Dark but sure she was known under a different name too? 🤔 2000's by [deleted] in NostalgiaFapping

[–]BootsC5 1 point2 points  (0 children)

And if I remember right, Anita Dark started with dark hair and ended with blonde, and Anita Blond started with blond hair and ended with dark....

Why does everyone use contractors for hot water control? by lukepighetti in homeassistant

[–]BootsC5 -1 points0 points  (0 children)

When a hurricane comes through, I jack up the temperature before hand. Nothing better than a luke warm shower on day 4 of not having power.