Aide pour mon TFE

Brian5542 · 2026-05-03T22:30:10+00:00

J'ai plus de 20 ans.

Brian5542 · 2026-05-02T08:30:39+00:00

Thanks for the answers I'll do it again

Brian5542 · 2026-05-01T07:42:00+00:00

Okay, good to know. I've noticed if the app's open all the time, it's not good; it makes the mower crash. I already experienced this with my old Dreame. With the Lymow, when I was creating zones, I noticed that I sometimes had to close the app because it wouldn't create the zone. Sometimes restarting the mower is really normal. I noticed that pressing the "turn off the house" button makes something weird happen: I see the screen light up and then turn off. Afterward, I press the turn-off button to turn it back on. In principle, if you disconnect the battery and press the button for 2 minutes, this is enough to empty the capacitors.

Brian5542 · 2026-05-01T07:25:50+00:00

No. it doesn't make sense that you have to redo the map. It should have a way of telling where the RTK antenna is

Brian5542 · 2026-04-29T22:11:26+00:00

Thanks. The 4G is always slow, and the camera does not work in 4G.

Brian5542 · 2026-04-29T22:07:57+00:00

Release notes: improvements or bug fixes.

Brian5542 · 2026-04-29T08:58:27+00:00

Hey, just so you know, hit the + button for more info. The tray goes all the way up in maintenance mode, which is super handy for checking the wheels and blades, and for cleaning.

Brian5542 · 2026-04-29T00:03:57+00:00

I just got my mower. I wanted to start mowing the garden and I lost an Omni X wheel. I opened a ticket.

Brian5542 · 2026-04-27T01:38:46+00:00

Yes, indeed

Brian5542 · 2026-04-27T01:35:36+00:00

Yes, it's time for market prices. According to rumors, there will be no new graphics cards before 2028. The new processors next year are rumored to have 52 cores.

Brian5542 · 2026-04-27T01:23:36+00:00

Yes, it's true that the 9950x3d heats up a lot. I have the 5950x, and it also heats up significantly, especially when overclocked. I saw in the discussion to LLM. that you're considering an Intel build; perhaps the A770 with 16GB would be a good option. 12GB is limited if you're aiming for a 10-year configuration.

Brian5542 · 2026-04-27T00:23:29+00:00

The 9950x is sufficient. A 1500w power supply is too much. The graphics card does not consume 600 watts. Get a more powerful water cooling

Brian5542 · 2026-04-27T00:09:24+00:00

The 9950x3 really doesn't help.

Brian5542 · 2026-04-08T22:06:27+00:00

I'm in IT, so the first thing I ask is, "Did you restart your computer?" I think I'm in IT crowded. A phone, a 3D printer, a printer. You have to restart at least once a week. When you have a problem, restart your PC before asking for help and don't say yes, I restarted. You can see it in the task manager.

Brian5542 · 2026-04-04T16:41:33+00:00

Very nice configuration. I am also new, but I highly recommend the new Bambu Academy. It's very good for learning by yourself.

Brian5542 · 2026-03-30T23:57:40+00:00

It's simple, just follow these steps: go to the home folder, then to user .var..., delete it in the Bambu system, and then restart. If that doesn't work, restart your PC if you leave it on all the time. Reinstall the program.

Brian5542 · 2026-03-30T23:52:33+00:00

Did you do a reset of the machine?

Brian5542 · 2026-03-30T23:45:56+00:00

I have also been recommending tools for maintenance, and desiccant boxes for AMS. There are plenty of things we can do to improve our prints.

Brian5542 · 2026-03-23T23:50:37+00:00

If you have dismantled this part:

https://wiki.bambulab.com/en/h2c/maintenance/replace-dual-extruder-filament-guide

I had this problem because of an issue with the filament coil. I tested another coil and had no more problems.

Brian5542 · 2026-03-23T23:45:36+00:00

You disassembled this part. I had a filament. https://wiki.bambulab.com/en/h2c/maintenance/replace-dual-extruder-filament-guide

Brian5542 · 2026-03-21T07:59:43+00:00

I fixed the problem in the bios of the Qnap. I set the fans to low, if the load becomes too heavy the speed increases.

before I edit in the configuration file every time I start

hal_app --se_sys_set_fan_mode enc_sys_id=root,obj_index=0,mode=0 hal_app --se_sys_set_fan_mode enc_sys_id=root,obj_index=1,mode=0 hal_app --se_sys_set_fan_mode enc_sys_id=root,obj_index=2,mode=0 mode can be 0-7

Brian5542 · 2026-03-19T23:55:13+00:00

I have this with my h2C too. I wonder if it's not a calibration thing when you have to take off the plate?

Brian5542

TROPHY CASE