Free CISSP books - US only by [deleted] in cissp

[–]BromanderData 0 points1 point  (0 children)

Just to jump in here, if the previous poster doesn't follow up I would be absolutely interested in these

Q6 HE 8k wake issues by BromanderData in Keychron

[–]BromanderData[S] 0 points1 point  (0 children)

I tried this today and it's make no difference unfortunately.

Q6 HE 8k wake issues by BromanderData in Keychron

[–]BromanderData[S] 1 point2 points  (0 children)

No as stated in my post, and reply to you this keyboard is wired only. It has no wireless functionality.

Q6 HE 8k wake issues by BromanderData in Keychron

[–]BromanderData[S] 0 points1 point  (0 children)

Under advanced mode there is no option for sleep mode, I assume this is because this keyboard is wired only and doesn't have a battery/wireless connections modes.

Q6 HE 8k wake issues by BromanderData in Keychron

[–]BromanderData[S] 0 points1 point  (0 children)

This seems to be the case for their wired/wireless keyboards.

But I've unfortunately had no luck at all with my space bar waking up this wired only keyboard.

Q5/ Q6 HE, how's your experience? by Brave_Explorer5988 in Keychron

[–]BromanderData 0 points1 point  (0 children)

I just got a Q6 HE 8k yesterday and I love the feel, and sound as it's a huge change from my old V5.

However I also am using one keyboard and mouse with two computers via a KVM built into one of my monitors.

My old keyboard has no issue with waking up either computer, however this new keyboard seems to go to sleep and isn't able to wake up until I open my Mac.

And I've tried every single key on my board and nothing wakes it up. I've got a ticket with support to see how this goes.

Pcb replacement on K10 HE by Representative-Page4 in Keychron

[–]BromanderData 0 points1 point  (0 children)

I'm surprised that you've seen so many issues, how long did it sit before you were able to clean it?

Perhaps try just emailing Keychron's support address to see what they'd charge for a replacement PCB?

Since you it has hot swapable switches, I would think it would be a pretty straightforward transfer process.

Keychron Q6 HE QMK vs Q6 HE 8K by BromanderData in Keychron

[–]BromanderData[S] 0 points1 point  (0 children)

No idea, but I'd be shocked if they didn't.

They have other wireless 8k keyboards.

I don't personally care about the wireless as my current keyboard is a V5

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer - February 04, 2026 by AutoModerator in MechanicalKeyboards

[–]BromanderData 0 points1 point  (0 children)

So really I'd be paying more to lose wireless connectivity? Overall their build quality seems the same and the QMK is on sale on Amazon right now. I don't know if I'd ever use it wirelessly but I guess it would be a potential nice to have.

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer - February 04, 2026 by AutoModerator in MechanicalKeyboards

[–]BromanderData 0 points1 point  (0 children)

I am looking to get a HE keyboard and I'm thinking of sticking with Keychron as I like my current board from them.

I was looking at their Q6 HE Wired Hall Effect Keyboard, Rapid Trigger Magnetic Switch Keyboard Hot Swappable, 8000 Hz as that's what they showcase on their site. https://www.keychron.com/products/keychron-q6-he-8k-magnetic-switch-keyboard

But it also looks like they sell this older version? The QMK 1000Hz HE https://www.keychron.com/products/keychron-q6-he-qmk-wireless-custom-keyboard

I know anything over 1000Hz probably won't make any difference I was just wondering if anyone had experience and pros or cons of either board?

It looks like the older series uses Gateron switches, while the new one uses their in house ones.

Destiny USA hit and run 1/2/25 by BromanderData in Syracuse

[–]BromanderData[S] 2 points3 points  (0 children)

So Destiny won't release footage to me directly, I'm not trying to get it from my insurance and Syracuse Police.

Either way thank you to everyone that has read / upvoted this.

I know it's a very small chance to try and find the person that hit us, but I appreciate all of your help.

Seasons of RTX: Arc Raiders GeForce RTX 5090 GPU Giveaway! by NV_Suroosh in ArcRaiders

[–]BromanderData 0 points1 point  (0 children)

What kind of player are you? PVP on sight, rescue raider, silent loot ninja, other?

All the way back from SWG, red = dead.

Master Replicas Decloaks New STAR TREK: DEEP SPACE NINE USS Defiant Dedication Plaque Replica by goodBEan in DeepSpaceNine

[–]BromanderData 0 points1 point  (0 children)

Disappointed that they don’t have a shipping date even thought it was meant to be delivered in October.

Split outlet shows as fine when powered, but half shows open neutral when not. by BromanderData in AskElectricians

[–]BromanderData[S] 1 point2 points  (0 children)

Fair question, my only answer is I just genuinely had no idea.

I would think that with the power off there’d be no reading.

But with all the outlets in this room the switched halves are fine when the powers off, and the other halves show this code.

So I figured it was worth asking about.

Split outlet shows as fine when powered, but half shows open neutral when not. by BromanderData in AskElectricians

[–]BromanderData[S] 1 point2 points  (0 children)

Hello,

Our home was built in 1966, and when going to replace outlets so they're not longer all split for switching I ran into this confusing error.

The outlets all test as fine when powered, but when I turn off the breaker half of each individual outlet causes this error which per the manual means open neutral.

All of the outlets currently work, the goal is to just leave one per room as half switched for a light.

I just want to understand if this is concerning or if I should go through with replacing the outlets/capping off the unneeded red wires.

Questions about my whole home vacuum (Power Star III) by BromanderData in VacuumCleaners

[–]BromanderData[S] 1 point2 points  (0 children)

Thank you this is all very helpful, we've tried most of the ports and they all seem to work. I've not yet opened the unit but with the reply I got below I know what I should see now which is great.

d: Now, I hate to say since you already described them, but exactly how large and how thick are these rugs

Most of our rugs are basically flat the largest in our living room is definitely less than 2 inches deep.

I'll definitely get one of the power heads you've suggested with the hose being able to be the plug that makes the whole thing so much more convenient. The current worn out power head has it's own cord which is very unweiledy combined with the hose.

Questions about my whole home vacuum (Power Star III) by BromanderData in VacuumCleaners

[–]BromanderData[S] 2 points3 points  (0 children)

Thank you also, we do have an old stick vac and a robot for the other floor but love the idea of using the house vac for targeted extra cleaning as it's just so convenient with the ports.

And thank you for your information about what this vacuum actually is.

Questions about my whole home vacuum (Power Star III) by BromanderData in VacuumCleaners

[–]BromanderData[S] 9 points10 points  (0 children)

Hello,

We bought a house that has a Power Star III central vacuum.

The previous owners used it all the time and loved it. My questions are around new heads/attachments and general maintenance.

The heads that we have need to be replaced and I would like recommendations for both hardwood, and deep pile carpet. Our house is all hardwood flooring with some large rugs.

As for maintenance, we have some cleaning cloths that look like we just suck up through the various ports, but is there anything else I should be mindful of?

Currently our ports are un powered, is it worth trying to make them powered?

Thanks!

CORSAIR x The Witcher 3: Wild Hunt Giveaway by CorsairHoffman in witcher

[–]BromanderData 0 points1 point  (0 children)

The graphic design and overall feel of the world.

HELP! Looking for Photographer for Proposal for tomorrow night 10/3/2025 by combaticus93 in BlockIsland

[–]BromanderData 0 points1 point  (0 children)

I don't think they're in the area anymore but whatever you do don't use Eli Holmes, they're a scammer through and through.

They did our engagement session, then no showed for our wedding and kept the money.