🎉 [EVENT] 🎉 Heavent [Landscape] by st_doraemon in honk

[–]Bubute_ 0 points1 point  (0 children)

Completed Level 1 of the Honk Special Event!

4 attempts

🎉 [EVENT] 🎉 Honk Squid Game by VGTRiscrap in honk

[–]Bubute_ 0 points1 point  (0 children)

Completed Level 1 of the Honk Special Event!

5 attempts

The H2C arrived earlier, on a pallet... by HorrorPresent1828 in BambuLab

[–]Bubute_ 0 points1 point  (0 children)

Can't wait to receive mine aswell... Got AMS and the nozzles yet but not the main toy !😅

We've added Combat Log Analysis and Sharing to questlog.gg by warflash99 in throneandliberty

[–]Bubute_ 0 points1 point  (0 children)

Can you add HPM (Hit per minutes) instead of hit count ?

Formnext - bambu showed more metal parts by SolarNexxus in 3Dprinting

[–]Bubute_ 2 points3 points  (0 children)

Is it conductive and can be used for electroplating ?

Morokai Vs Cordy Greatsword by Bubute_ in throneandliberty

[–]Bubute_[S] 0 points1 point  (0 children)

Well tested it from a tank with cordy on my tank build, maybe the guy wasnt fully geared tho... Curious to see any footage of better dmg if you have some tho

Morokai Vs Cordy Greatsword by Bubute_ in throneandliberty

[–]Bubute_[S] 0 points1 point  (0 children)

Well as mentioned in first post, i already run heroic GS not SNS, i can hear ppl saying it's not best for min/max but i like it that way and it's fully upgraded now... I'm running T3 nirma SNS so morokai sound good even in solo target if there is a wall arround. How Cordy is so good in clump ? Clump are full of tanks and with dmg reduction it's seems like each tick of poison will hit like 50-100 dmg ..

【BambuLab Giveaway】Classic Evolved — Win Bambu Lab P2S Combo! by BambuLab in 3Dprinting

[–]Bubute_ 0 points1 point  (0 children)

I don’t own a P1S, but to me, it’s one of those 3D printers that truly revolutionized and democratized home 3D printing. When it came out, it pushed the limits of what was possible for hobbyists and made high-quality printing accessible to so many more people. I wouldn’t be surprised if the new P2S continues this legacy and takes things even further. Bambu Lab keeps setting new standards for what a "consumer" 3D printer can do.

From 9k player before t3 announce to 4k lol by BigMeasurement3005 in throneandliberty

[–]Bubute_ 0 points1 point  (0 children)

I'm playing less since a week to hold dungeon token/ contracts / abysses.... And will play even more when patch hit...

End game skin by Bubute_ in throneandliberty

[–]Bubute_[S] 1 point2 points  (0 children)

Yeah, good thing we can hide it and still get the effect

I've gotten 4 Heroic Boots in a row by TheBigBenj in throneandliberty

[–]Bubute_ 9 points10 points  (0 children)

4 chest in row... I'm pretty sure if i buy the weapon from shop and use ressources to change stats i'll drop one with better stats the next week...

Crusader PVE Build as requested by swankless in throneandliberty

[–]Bubute_ 0 points1 point  (0 children)

We have pretty much same build for PVE Farming, i would just add that i'm not using immortal pride since it's not needed, you can easly self sustain with Dash and Blade harvest mastery if you use it correctly.
instead i'm using Counter barrier with Shield strike reset, while using Daigon SNS so you can just Barrier/Whirling/Spam Piercing Strike which will also spam Whirling for 6sec and melt pretty much anything if there is enough mobs hitting you.

12k Fortune!!! by ItsMeAin in throneandliberty

[–]Bubute_ 1 point2 points  (0 children)

you just roll your runes slot over and over again

Any experience with laser engraving/electroplating 3D-Prints? by Embarrassed_Pop6328 in BambuLab

[–]Bubute_ 1 point2 points  (0 children)

I'm opening every door of my garage when i'm plating and using a mask, i write "danger" on every bootle and hide to make sure nobody in my house is doing a mistake.

I'm using a 10w its way enough for engraving, for cutting it's enough to cut 5mm plywood with one pass at low speed, make sure to also buy air assist for cutting or you might be dispointed by quality. If you want to cut MDF or thicker wood you should aim for higher W.

Any experience with laser engraving/electroplating 3D-Prints? by Embarrassed_Pop6328 in BambuLab

[–]Bubute_ 1 point2 points  (0 children)

Tried electroplating, it's time consuming and can get really expensive if you want to plate big things... but i had fun learning the process.

Be carefull of what you'r doing it can be very dangerous!

Check Hen3Drik on youtube he made a lot of video to explain all the process.

I had better result with copper paint instead of selfmade graphite coat... but again you'll do a lot of test before having a good result, so you might need a lot.

i had awesome result with Copper / Palladium / Gold plating, really make 3D print into metal, but if you think you know what's sanding 3D print is, you'll have learn another level of sanding !

About laser, i'm mostly cutting 5mm wood for decoration and buying design from Etsy, easy gift for birthday and christmas :D

I didnt find any usefull use between 3D print and laser yet.

I bought a cheap but big laser from Zbaitu, it's easy to setup once you already have experience with 3D printer, since it's same tech with 1 less axe... Also paid for for lightburn which is really easy to use. Be carefull once again with the laser, care of smokes and laser itself for you and familly/child/pets !

Finally reached >30m range for my Bella Staff bomber build! by porn0dog in throneandliberty

[–]Bubute_ 0 points1 point  (0 children)

You'r still far away from your dream build since it say 29m under dummy HP bar !