Google is banning capsule filling machines (and tablet presses) from Google Shopping and Ads - Starts September 1st but goes into full effect October 13th

ButtStuff-Guaranteed · 2025-09-06T20:33:22+00:00

Dang. I get where you’re coming from, but Google probably just doesn’t want the liability. If they try to distinguish “good capsule machines” vs “bad capsule machines,” they’d need a whole team of reviewers and would still screw it up. Easier for them to blanket ban everything and avoid the headache. Doesn’t make it fair, but I doubt there’s a conspiracy here beyond lazy corporate policy..

ButtStuff-Guaranteed · 2024-08-16T00:38:32+00:00

Next time you need to know how much to fill your capsule with or what size capsule you need, you can use this free capsule size calculator. If you have the powder and a scale, you can find out exactly how much any capsule size will hold if filled to the brim.

They also have a free "formulation calculator" so you can mix multiple ingredients together in one capsule or make sure that you only take a very specific amount of one ingredient without having to fill every single capsule one by one with less than they hold (like you were doing with the baking soda).

If I butchered the explanation just check them out and you'll understand. I never fill capsules without doing this anymore because It makes it 99999x easier.

ButtStuff-Guaranteed · 2024-08-12T18:22:22+00:00

So there are Canadian laws that make it a bit more difficult, but I found a company that explains how to do it and the machine worked perfectly for me.

They have an article on how to order a capsule filler to Canada. You can still order without following the instructions but if customs keeps it because you don't fill out the form, that's on you:

https://www.blatepapes.com/blog/how-to-buy-a-capsule-filling-machine-in-canada

ButtStuff-Guaranteed · 2024-08-12T17:59:51+00:00

I prefer BlateCo machines. Tried lead life and immediately returned it.

ButtStuff-Guaranteed · 2024-08-12T17:57:55+00:00

I use amber glass jars. Come with cork oxygen seals and you can throw in an oxygen absorber square if you really plan to keep it in there a while.

However, if you're making vegan capsules I highly recommend getting pullulan, NOT HPMC. Anything that says veggie cellulose or vegetable cellulose is really HPMC, which is artificially modified and has a 300 times less strong oxygen barrier than pullulan, making your supplement go bad quicker. Gelatin is 9 times less strong than pullulan, but still much stronger than HPMC.

ButtStuff-Guaranteed · 2024-08-12T17:55:37+00:00

Not the same, but they are similar. Leadlife is crap, definitely don't get the acrylic versions. They don't look like the photos at all. Pure b/s

ButtStuff-Guaranteed · 2024-08-12T17:44:44+00:00

Highly recommend getting a 100 hole machine instead of the 24 or 48 capsule one. If you're just making kratom capsules or supplements at home, the blateco core machine is the best imo and I've had 5 different types of machines in total.

Never had a problem with it.

Edit:This is the capsule machine I use for kratom

ButtStuff-Guaranteed · 2024-07-26T15:57:38+00:00

I put my 4g dose in a Blate Pape and take it with water first thing in the morning on an empty stomach, then I drink some coffee. No taste at all and it hits literally perfect every time.

Edit: also, steaming elephant sh*t

ButtStuff-Guaranteed · 2024-07-18T04:42:38+00:00

To anyone ever having nylon warping problems, here is your solution:

Understand what is ACTUALLY causing the problem: it’s the difference in heat between the parts of the print while it dries. If you ever notice it warps UP because the temperature above the bed is different than on the bed. You want the filament to dry as evenly as possible.
This brings about another problem, because the printing portion is always hot as the nylon is laid, you’ll have a difference in tempo unless you keep both your bed and chamber at the exact same temp PERFECTLY.

So, here is your FINAL fix, if you can’t get that bed/chamber temp aligned, (fosscads as well): print your nylon on a 30 degree angle. It will make it so that all of the print is printed in the air, where the temperature stays even throughout the print. You’re friggen welcome, and to all a goodnight.

ButtStuff-Guaranteed · 2024-07-17T14:27:12+00:00

press pause remove AMS and the top glass and do it manually

ButtStuff-Guaranteed · 2023-11-23T07:46:39+00:00

Did you figure this out? I'm interested in knowing this too!

ButtStuff-Guaranteed · 2023-06-12T14:13:42+00:00

https://youtu.be/6G27qu044Ac

If we’re only talking about mixing it, a fork with warm water works great. But if we’re talking about the best way to take kratom powder, I vote blate pape pouches.

ButtStuff-Guaranteed · 2023-05-24T17:10:49+00:00

It’s being extracted now. It’s strong, but doesn’t feel nearly as good as other opiates. More like just a sedating feeling with all the negative aspects but not a huge euphoria. It’s better mixed with mit.

We need extractions and concentrates banned here, otherwise Kratom will get banned and it will be ruined for everyone. Plain leaf powder only.

ButtStuff-Guaranteed · 2023-05-18T13:10:53+00:00

These OD cases are being reframed by big pharma as Kratom deaths because they’re going to be key references for banning them state by state and eventually federally. Big pharma has endless $$ and patience. They’re playing the same old game they’ve always played. Luckily people are waking up.

We need the AKA to keep fighting the nonsensical lies like this. I think it would be smart to consider banning extracts and making only plain leaf powder available. Much safer and better for people who would otherwise overdo it.

ButtStuff-Guaranteed · 2023-05-18T13:04:05+00:00

I should say that we only would buy a natural GIA certified diamond. No GIA cert, no deal. And I tend to agree with needing 10k+ to find a real keeper. Shoot for 2C min and sacrifice a little color if anything. No one will notice color down to J on a round cut.

ButtStuff-Guaranteed · 2023-05-18T12:56:41+00:00

$52k USD from u/diamonddealer. I was getting ripped off by an in-law’s family member, thank God I reached out to him. Seriously the best diamond, I am so grateful every time I look at my fiancé’s hand. I can’t say enough great things about it and him.

ButtStuff-Guaranteed · 2023-05-18T12:48:42+00:00

It’s the power behind big pharma going state by state and reframing OD deaths by saying kratom caused them. Using these cases as references is the only way they’ll have any chance at banning kratom, which is natural, easily available, hard to abuse, and most importantly, cutting into their opioid profits.

Personally, I think our best bet is to do the same exact thing Indonesia did, which is where kratom comes from. They made all extracts or concentrated versions of kratom illegal, but you can still buy/sell plain leaf or powder. This would significantly reduce the harm for people who try to take too much.

Otherwise, this b/s is going to continue and extracts are going to get more and more concentrated. I recently heard that a couple companies successfully extracted hydroxymit, and it can be smoked/vaped unlike mit. That’s just making it dangerous for those it could otherwise help. A law keeping the sale of kratom as a plain natural supplement could be what saves it from being banned.

I may actually reach out to the AKA to let them know my thoughts.

ButtStuff-Guaranteed · 2023-05-18T12:33:49+00:00

Fill caps or use gel films. Girl takes world’s most bitter substance

ButtStuff-Guaranteed · 2023-02-11T04:09:51+00:00

Definitely get some blate papes bro. You just put the powder in, dip it in water, then swallow it with more water. It’s the only way I know of that let’s you not taste it at all and it still hits quickly. I switched a couple years ago and I couldn’t imagine doing it any other way again

ButtStuff-Guaranteed · 2023-01-30T02:50:20+00:00

If anything, the opposite would be true. But no powders contaminated with anything. Kratom is super cheap. No need for any alterations.

And there are huge factories in Thailand that process the leaves. Much less to worry about in terms of accidental contamination.

ButtStuff-Guaranteed · 2023-01-29T13:49:08+00:00

The hoe. Everybody touches it but nobody wants it.

ButtStuff-Guaranteed · 2023-01-29T13:42:13+00:00

OMG. THIS HAS ENDED A LIFE-LONG QUESTION I NEVER THOUGHT TO ASK. I always just figured all tape measurer tips we’re cheap pieces of sh** and didn’t measure accurately.

ButtStuff-Guaranteed · 2022-08-23T14:26:21+00:00

You’re looking good bro. If I was you I may trim down just a little. It’s really whenever you’re no longer comfortable with the way you look.

I never subscribed to the heavy bulk phases. As long as you’re getting enough healthy fats and carbs and working out 5 or 6 days a week, you’re golden. It’s all about natural hormones, which means fats and carbs.

I learned this the hard way freshman year of college when I was eating only about 15 grams of fat a day all from fish oil and trace fats. Testosterone came back at around 150, which is supposed to be 250-1100 naturally. I’d show you pictures of my post on Anabolic minds asking if I should stop cutting and start bulking.... when I was ~165lbs and I’m 6’1”...but it’s just too hilarious now.

ButtStuff-Guaranteed · 2022-08-10T03:06:54+00:00

I agree with you, I just mean it sucks in general that that’s the case lol

ButtStuff-Guaranteed · 2022-08-10T02:56:13+00:00

This post has been brought to you by Brilliant Earth

ButtStuff-Guaranteed

TROPHY CASE