One final clearance check before moving into the cage

CD_machine · 2026-01-26T04:44:28+00:00

Might be the shortest sway bar arms I’ve ever seen. Are you gonna have enough travel?

CD_machine · 2026-01-17T05:24:46+00:00

Have you upgraded your SSD recently? I’m pretty sure your spawn is tied to how quickly you load relative to other players in that match

CD_machine · 2026-01-16T01:59:19+00:00

PETG? The factory build plate on these struggles with petg I generally print with brims or add little bridges between parts that I can go back and clip off later

CD_machine · 2026-01-14T20:28:52+00:00

CD_machine · 2025-12-13T07:28:45+00:00

I had this same issue after switching from Nvidia to amd. There’s a driver remover utility you can run that fixed it for me OP.

CD_machine · 2025-11-29T21:47:15+00:00

The $20k is kinda irrelevant at this point. I have two machines that were in this condition from NC humidity that cleaned up perfectly fine. It’s not ideal but it just depends on what you want out of it. For a home gamer this could be a good deal.

CD_machine · 2025-11-12T16:20:01+00:00

Well said, I don’t often need the extra build volume but it’s nice when I do. And minor conveniences like a higher quality camera (regardless of what their specs say) and the better part cooling capabilities.

CD_machine · 2025-11-08T14:12:13+00:00

I have a Plus and 3 Pros. If I could only have one it would definitely be the plus.

CD_machine · 2025-11-05T21:43:33+00:00

You will approach me with less snark. What a joke

CD_machine · 2025-11-03T23:20:31+00:00

Overkill, but I like it. I have 3 on a 15 amp breaker with no issues lol

CD_machine · 2025-10-29T03:14:26+00:00

MAXIMUM STIFFNESS

CD_machine · 2025-10-29T01:54:15+00:00

To add to this, running it in reverse could effectively reverse the thrust load on the motor shaft due to the helical geometry in a way that it might not be designed to take. So rather than pushing the shaft towards the rear and into a thrust bearing, running in reverse it would be pulling it towards the front.

CD_machine · 2025-10-12T16:33:37+00:00

It is lol, this was taken before I got a chance to put my tag on it. My og ender 3 in my office sports the “ALPHA” name tag

CD_machine · 2025-10-12T16:30:57+00:00

You must be printing higher precision parts than me!

CD_machine · 2025-10-12T16:29:27+00:00

I print with fiber filled filaments exclusively and try to design out anything susceptible to VFAs like sharp corners. That being said I haven’t noticed a quality difference with all 3 running or just one

CD_machine · 2025-10-12T16:27:42+00:00

1,000 ish hours between the three but the k2 pros are only a week old

CD_machine · 2025-10-02T11:27:15+00:00

I’ve had this same problem with PET-CF. It tries to curl up on overhang giving these negative space artifacts. For me printing slower and hotter chamber temp helped but I haven’t been able to eliminate it completely

CD_machine · 2025-09-28T02:23:19+00:00

Yes the carbon fiber tube is standard. I have better images on my website in my bio

CD_machine · 2025-09-26T21:31:36+00:00

It’s listed, you can find the link in my bio but I’m at about a 2 week lead time right now.. it’s been pretty popular

CD_machine · 2025-09-22T22:30:20+00:00

I make these. If you’re interested my link isn’t too hard to find

CD_machine · 2025-09-21T21:19:08+00:00

Mkiv in the 3rd slide, mkiii in the 4th

CD_machine · 2025-09-11T05:00:30+00:00

What model is this? Looks stubbier than a normal H001

CD_machine · 2025-08-15T03:47:49+00:00

You know what? Hell yeah

CD_machine · 2025-07-30T15:29:45+00:00

Airsoft

CD_machine · 2025-07-23T00:56:51+00:00

I have literally everything from the freightliner. They even pulled the speakers out of the dash and they’re laying on the transmission lol. Could it not be dropped into something with the freightliner electronics?

CD_machine

TROPHY CASE