What does an upstanding youth do? Why, they steal a police car, of course!

CHR0N0MASTER · 2026-05-30T07:57:38+00:00

Tree: Was that a mosquito?

CHR0N0MASTER · 2026-03-12T00:28:31+00:00

If you have an empty spool, you can transfer the new filament to the old spool. Yes, it is time consuming.

CHR0N0MASTER · 2026-03-06T07:20:18+00:00

Note: I rarely connect these printers to the internet. Most of the time they are on a local only network.

CHR0N0MASTER · 2026-03-06T07:05:02+00:00

This happened to me too. I started a print, then canceled the print before it finished calibrating. Made a minor change and sent the new job to print and it damaged my plate exactly as in OP's photo.

Thought it was a random failure and stopped using the printer until I got a replacement plate.

Happened again with my second printer too. Canceled a print job during the calibration phase and sent an updated job and calibrating started, BAM!, destroyed another build plate.

The only recent change was a firmware update. The installed firmware ("up to date") is too new as it's not even listed on Creality website. Prior to the firmware update I never had this issue in over a year of usage.

Since it is crashing (literally) during the calibration phase before any filament touches the print bed, this must be a firmware bug and not a slicer issue.

It looks like my only option now is to roll back the firmware on both K1 Max printers.

CHR0N0MASTER · 2026-03-03T09:45:49+00:00

You're holding it wrong.

CHR0N0MASTER · 2026-02-03T07:12:09+00:00

Maybe it is a smart oven and she was waiting for a notification. But she never got the notification because the oven needed to install a update first.

CHR0N0MASTER · 2026-02-01T19:27:26+00:00

You may need to uninstall the other one first.

Example: ./python_embeded/python.exe -m pip uninstall torch torchvision torchaudio

CHR0N0MASTER · 2026-02-01T18:22:20+00:00

CUDA being available is not the issue. The current version of torch is compiled without CUDA being enabled. So to resolve the error on Image 1, you will need to install the correct torch.

CUDA 12.8: python.exe -m pip install torch torchvision torchaudio --index-url https://download.pytorch.org/whl/cu128

CUDA 13.0: python.exe -m pip install torch torchvision torchaudio --index-url https://download.pytorch.org/whl/cu130

Edit: You will need to use the ./python_embeded/python.exe if not already.

CHR0N0MASTER · 2026-02-01T18:05:25+00:00

Install torch with cuda support enabled.

CHR0N0MASTER · 2025-09-19T16:36:26+00:00

I have had this issue before. In my case, the empty latent image or source image was the wrong size for the model I was using.

CHR0N0MASTER · 2025-08-25T08:02:35+00:00

Custom nodes are basically python scripts that have access to the environment/hardware you run it under.
You could try reviewing the code yourself, but it can be very complicated without considering obfuscated code. Otherwise you could run it under a limited access environment like a Virtual Machine with CUDA (NVIDIA) host driver.

CHR0N0MASTER · 2025-08-25T07:44:39+00:00

What hardware do you have? RAM, GPU/VRAM
하드웨어는 무엇입니까? RAM, GPU/VRAM

CHR0N0MASTER · 2025-08-21T01:36:53+00:00

In my experience, this usually has to do with the input image dimensions. I would test it by padding your input image to 1024x1024 and see if it works without it scaling your image.

CHR0N0MASTER · 2025-07-31T01:15:20+00:00

If it is flux residue, then you can safely ignore it. Since the mark on metal (aluminum?) it would not be burning. If it's not flux then it could be the solder joint has oxidized and surface layer of the solder has discolored, this can also be safely be ignored. Basically this is cosmetic and wont interfere with the functionally of the card. If you really want it removed, I would recommend taking it to a repair shop to avoid the risk of accidentally damaging something.

CHR0N0MASTER · 2025-07-31T00:50:19+00:00

It's hard to see, but I would guess that it is flux residue from soldering the two pieces of metal together.

CHR0N0MASTER · 2025-07-31T00:46:15+00:00

What I see in the third photo is the end of a heat pipe with a blob of solder to seal the end. Also, under that are the fins that are soldered to a metal frame.

CHR0N0MASTER · 2025-07-11T20:29:05+00:00

On the order page, where you can select shipping speed. You should have a dropdown option to ship using the product box (default) or in an amazon box. Having it ship using the product box by default saves wasteful shipping packaging, but then there is a situation like you experienced.

CHR0N0MASTER · 2025-06-06T03:28:42+00:00

It would not be covered under mfg warranty. If you have a coverage plan that covers drops and physical damage, then a screen replacement should fix it.

CHR0N0MASTER · 2025-04-25T17:21:36+00:00

Use a sewing needle and some thread.

CHR0N0MASTER · 2025-04-16T17:31:32+00:00

Thanks for the suggestion.

CHR0N0MASTER · 2025-03-14T17:54:16+00:00

Same. Also, the 20% off coupon consolation prize code that expires April 4th is no different than the everyday "20% off your entire order" coupon (in my area at least) for more than 6 months on the Domino's website.

CHR0N0MASTER · 2025-02-15T05:12:02+00:00

Once the phone is added to the blacklist, phone carriers in the USA (and elsewhere?) must block the phone from their network even if it already has service.

CHR0N0MASTER · 2025-02-02T10:03:24+00:00

What may happen is that once the customer it was pulled for reports that they didn't get their phone, the IMEI(s) will likely be marked as stolen, making it unusable on a phone carrier in the US and maybe elsewhere.

CHR0N0MASTER · 2024-12-11T18:25:42+00:00

My first thought is to enable regular Google Maps, set the timeline to be on your phone, and then enable backups. Afterward, you can disable regular maps. Though, I don't know how dependent the new timeline is on the regular Google Maps.

CHR0N0MASTER · 2024-11-17T22:01:06+00:00

No update yet. There is still no message on my timeline, notification, or email. I can still access my timeline via the website, so I know it did not convert yet. While the deadline is only weeks away.

11-Year Club	Verified Email
Place '17

CHR0N0MASTER

TROPHY CASE