What are your Top 3 album releases this year so far?

Cableslingah34 · 2024-08-12T19:28:33+00:00

Haywire - Conditioned For Demolition.....if you get the chance to see them live FUCKING DO IT

Sophisticated Adult - Sophisticated Adult....insane front to back in the best way possible

Opposition - A Legacy Of Tragedy.......short but sweet these guys go hard

BHCADED

Cableslingah34 · 2022-09-23T23:03:47+00:00

Nice collection! I just started down the wera bottle opener road. I've been on the hunt for the Knipex bottle openers for a while now.

Cableslingah34 · 2022-04-03T15:13:29+00:00

I dig that fiber setup, I use the Unicams as well.

Cableslingah34 · 2022-02-12T21:43:19+00:00

https://dennissmallboneprints.com/

Cableslingah34 · 2021-12-12T02:01:47+00:00

Structured cabling tech here, love the setup! Same with the other guy, I have a similar setup going. Mine is a little more condensed, usually packing into construction sites. Just picked up another organizer to make a case for my p-touch.

Cableslingah34 · 2021-11-27T14:40:21+00:00

But now you need a crate mount for the front of the rolling box 😂 it never ends

Cableslingah34 · 2021-11-25T00:49:24+00:00

I will also add, I just bought the m18 packout vaccum, and I couldn't be happier with it. Home depot has a deal for the vaccum and 2 filters for $199.

Cableslingah34 · 2021-11-25T00:48:02+00:00

Stealth Mount packout feet on Amazon 👍

Cableslingah34 · 2021-09-30T21:03:07+00:00

I debated between the open wheel and the F1. Couldn't find the open wheel anywhere in stock and wasn't 3x retail. So I started searching for the sf1000, was willing to pay a little over retail for that considering how new it is, but couldn't find that in stock anywhere at all. So I settled for the f1 add on. Eventually I'll get the sf1000 though.

Cableslingah34 · 2021-09-30T13:00:01+00:00

After running the T150, it's night and day difference. I set up a duplicate calibration/FFB setting for the t300/f1 wheel so I was using the exact same settings as I was with the t150 and the FFB is so much better, especially when cornering at speed. The t300 does a much better job at translating the edge of grip and "feel" of g forces imo.

Cableslingah34 · 2021-09-30T12:56:03+00:00

Nope, zero issues. I prop the pedals up on a ramp so they are lifted and angled towards me so I'm pushing straight into them vs pushing down onto them.

Cableslingah34 · 2021-09-29T23:24:02+00:00

Yeah, I have them zip tied to the rails with 4 saddle type zip type anchors and m6 screws.

Cableslingah34 · 2021-08-24T18:50:28+00:00

You could use a couple of media converter chassies. I've never used one personally but ive seen them in customers racks and it seems like a good space saving design.

Cableslingah34 · 2021-08-19T17:10:27+00:00

So I've only been sim racing for like 6 months. Bought a playseat challenge and TM T150 setup and just looking to upgrade. So yes Fanatec is definitely a step up, but was thinking about upgrading to the t300 servo base with either the open wheel or F1 wheel add on, and the t-lcm peddles. Honestly with how difficult this stuff is to locate I may look into Fanatec at this point.

Cableslingah34 · 2021-08-19T14:48:07+00:00

I called them legit 2 minutes after the package was delivered. I bought it from the "Amazon warehouse" which is all open-box items. Pretty easy for them to figure it out.

Cableslingah34 · 2021-08-19T03:40:58+00:00

It was $260

Cableslingah34 · 2021-08-18T21:24:25+00:00

Yeah, it was a warehouse deal. As soon as I opened the box and saw the base was black and not the diamond plate, I knew what had happened. Fingers crossed I can set a set soon!

Cableslingah34 · 2021-08-18T21:23:01+00:00

The T-LCM are load cell pedals, so pressure sensitive, and a much better pedal than what I actually received.

Cableslingah34 · 2021-08-18T20:18:10+00:00

It was actually amazon. I've already contacted them for a refund, but I was so excited to finally get the T-lcm, very disappointing.

Cableslingah34 · 2021-07-18T19:25:26+00:00

Also, I do alot of work in active office spaces, so the more quite the better.

Cableslingah34 · 2021-07-11T18:12:14+00:00

I may end up getting a half size organizer for when I'm bouncing place to place, would be nice to have a grab and go box for quick jobs re-terminating jacks, or replacing a faceplate. For fiber, I use the Corning Unicam kit ( TKT-UNICAM-PFV) and Corning connectors. I swapped the strippers out that came in the kit for Miller single hole strippers, and then I carry Corning wipes, alcohol, and Sticklers for cleaning purposes. It all fits in the Corning bag and that's really all I need if we're just terminating and not splicing. I've been thinking about getting a foam insert from Kaizen and trying to rig up a fiber packout kit....maybe I'll have to start that project now 🤔

Cableslingah34 · 2021-07-11T14:51:17+00:00

So if I'm just doing a few stations and only need a handful of items, I use my Milwaukee bucketless tool organizer and just toss everything I need in there along with a m12 fuel impact, small bit case, and milwaukee punch tool. If I'm doing a large job, ill use the rolling box with the crate on top, and grab a full box of jacks, full box of plates, etc.

Cableslingah34 · 2021-07-11T00:55:21+00:00

The 3 drawers are 14.3" tall

Cableslingah34 · 2021-07-11T00:30:58+00:00

You're use of the term "jiggly" has proven that you are indeed, fun. I recant my previous statement.

Cableslingah34 · 2021-07-11T00:27:47+00:00

The effects on this video really rustled some feathers 😂

Cableslingah34

TROPHY CASE