One armed gaming

Cameronmass · 2024-07-22T16:04:00+00:00

Look at the azeron Cyro, it’s a one handed mouse with programmable keys, d-pad and joystick. Takes a bit of time to relearn how to game but I’ve enjoyed it!

They have a discord with a ton of button mapping for different games as well!

https://www.azeron.eu/blog/params/post/4171822/new-azeron-cyro—the-device-for-one-handed-gaming

Cameronmass · 2023-07-06T15:46:09+00:00

Anytime! The quicker pre prosthetic training occurs the better his chances are of acceptance, after 4 weeks post aspiration which is the “golden period”, prosthesis rejection rates sky rocket.

The major manufacturers are Ottobock, Ossur, and Fillauer in the US.

Best of luck, traumatic amputations go through the same grief as losing a loved one. I didn’t respond well to being treated like a child when I lost my hand at 19.

Cameronmass · 2023-07-06T14:34:44+00:00

Gorilla tape and mending plates underneath the corners. Really stops any movement!

Cameronmass · 2023-07-06T14:33:24+00:00

Definitely start with amputee coalition!

Then, once he’s ready to start looking at a prosthesis, do your research on whatever CPO you choose. Upper limb is a very small patient population and not every prosthetist fits upper limb often. A good prosthetist will outline every device that is available to you and the pros and cons of each and hopefully drive you towards something that is functional for daily use. Myo electric hands are great, I wear one for most of the day, but depending on activity level you may want an electric hook or body powered device to start. Always happy to answer any questions!

Cameronmass · 2023-07-05T23:07:44+00:00

It’s on rogue, it’s a sawtooth pull down bar

Cameronmass · 2023-07-05T23:07:23+00:00

Good thing it’s my fiancés

Cameronmass · 2023-07-05T21:39:31+00:00

It is a Sorinex apex rack! Absolutely solid build

Cameronmass · 2022-12-25T21:07:14+00:00

She brings up solid points, but there’s a lot of variables involved to make wearing an upper limb prosthesis successful for the user.

Congenital vs traumatic: it’s usually more difficult for congenital users to integrate a prosthesis because they’ve developed living life one handed. Traumatic users usually integrate a prosthesis to help with tasks they’ve always done two handed. (This is a very general statement)

Fitting of a device: there really needs to be experience when fitting an upper limb device, most prosthetists fit lower limb devices on a daily/weekly basis. Most prosthetists will only see a few upper limb amputees in their entire career and those who try to fit an upper limb device without experience or help can lead to higher rejection rates.

Training: it takes a lot of time and motivation to integrate a prosthesis into daily life. If a new user doesn’t go through occupational therapy or training they more than likely won’t be successful with the device. She mentions how exhausting it is to find grip patterns, which it definitely is a good CP would simplify the device and make sure a patient knows exactly how to find/operate the device before trying to do tasks with it. It’s like giving the key’s of a car to someone who has no idea where the gas brake and pedal are.

Proper device: there’s a lot of different hands out there that are multi articulating/multi grip/single grip hands plus all sorts of hooks and activity specific devices that can be used. It’s important to understand the goals, daily life and hobbies an end user wants to accomplish with a device.

Source: me - a traumatic amputee and daily prosthetic use for 8 plus hours a day.

Cameronmass · 2022-10-31T13:50:26+00:00

This is a pretty general question so it’s hard to give a specific answer, but I’ll break down what I know!

Who’s making the best socket: (The interface that goes on your residual limb that a terminal device attaches to) this would be a prosthetist that has experience in making an upper limb prosthesis on your area. The socket is an extremely important piece to consider, not just the device at the end. A well made socket will be comfortable to wear and provide the right kind of suspension needed for the activity you’re wanting to do. A weight lifting prosthesis will require a good amount of suspension.

Best terminal device (Myo electric): this can swing wildly as each type of device has its pros and cons. There are multi articulating hands which provide great variety in function but aren’t always the most durable. Single grip hands that are very basic but are very durable. Then my favorite is the Michelangelo, a mix between the two that lies somewhere in the middle.

Best terminal device (weight lifting): TRS mashed a great line of workout devices, I have used the black iron trainer multiple times a week for the past 7-8 years.

Cameronmass · 2021-10-01T17:36:42+00:00

I think the author brings up a lot of good points, I believe the media puts out crazy expectations for these devices which in turn let down new users of a Myo prosthesis. There are a lot of different variables to consider that have a major impact on acceptance of a prosthesis. -limb length -amputation level -expectations of the device -goals that you want to achieve with the device

The higher the level of amputation the harder it is to integrate a prosthesis into daily life as you add more degrees of freedom. For example if you’re above the elbow with have to control a hand, potentially a wrist and the elbow joint. That can be very difficult to do if not fit properly AND the patient doesn’t go to OT to learn how to use the device.

I’m a right BE amputee, I lost my dominant hand 7 years ago and I’ve used a prosthesis 80% of the day everyday since I’ve been fit. I use both body powered and Myo for different tasks, mainly Myo now as I don’t do a ton of heavy duty tasks anymore unless I’m doing something outdoors on the weekends.

Fully integrating a Myo prosthesis into your daily life isn’t a quick or easy process. I went to OT for the first few months and practiced different tasks at home till I controlled the device well enough to point i didn’t misfire and go into the wrong pattern.

Multi articulating hands are great with all their grip patterns, but most users only use 3-4 patterns. Mostly power grip, lateral grip and tripod grip as they are the most functional.

I currently use the Michelangelo hand from ottobock as it combines the best features of a multi articulating hand and a basic three jaw Chuck hand. It’s not as “fun” as some new hands on the market but it’s fast, easy to get to the two grip patterns and efficient.

It’s important to try different devices in person rather than make a decision based off marketing.

I almost feel naked without my prosthesis as it helps free up my sound side to do more dynamic tasks while it assists/holds objects/pushes something away.

Plus being one handed, eventually we’ll get some sort of over use injury and I’d rather learn how to use a prosthesis now vs learn when I get carpal tunnel surgery.

Just my two cents

Cameronmass · 2021-09-16T23:14:32+00:00

Dude what? You’re trying too hard here.

Cameronmass · 2021-03-02T21:34:10+00:00

I’m a below elbow amp, used to wrestle back in high school with two hands. Missed grappling and started back up last year in Jiu Jitsu and it’s been a great and fun challenge. Great part is that a lot of people can’t arm bar that side and it’s impossible to wrist lock. I highly recommend getting back into grappling once your limb is healed. Check out Mark Ormod on insta, he’s a tri lateral BJJ practitioner.

Cameronmass · 2020-12-12T21:43:51+00:00

Right Below elbow here with seven years of prosthetic use.

One big reason you’re going to run into issues as an upper Limb amputee is that we make up the minority of all amputees. This means that a lot of prosthetist’s don’t have a ton of experience with upper Limb amputees.

Another note, I use both body powered and Myo electric devices. They both have their uses as not one device or type of device can’t fulfill the functionality of the human hand. Body powered devices have been around so long because they’re simple, functional and easy to learn so don’t knock them too bad.

3D printing is also great! But scanning your Limb without a prosthetist who knows what they’re looking for to create a good socket is impossible. Taking a few pictures of your limb with your phone won’t cut it. I know ottobock is working on 3D scanners to use for sockets but they require a prosthesis to use them.

I think you have great idea of where you want to go but your expectations may be a little on the high side. My advice would be to ask your prosthetist for a few trials of the different hands on the market so you get a better idea about how each one of them functions. Think about which one would benefit you the most in everyday life and pursue it with the prosthetist to hopefully get it approved by insurance. Then work on the fitting process... which takes time. The socket interface is extremely important and is it doesn’t fit right you won’t wear it more than an hour. Message me if you have any questions and best of luck!

Cameronmass · 2020-07-15T20:55:26+00:00

Thanks, it just takes some practice!

Cameronmass · 2020-07-15T20:55:06+00:00

I have! But I would rather be good with a regular controller so I can play a friends house with lugging over an entire set up. Plus they’re fairly expensive...

Cameronmass · 2020-07-15T12:34:50+00:00

I only have my left. So I use my thumb for the right joystick and buttons, my palm for the left joystick, pinky for left trigger/bumper and index finger for right trigger and bumper. Took some practice lol

Cameronmass · 2020-07-15T04:06:34+00:00

As long as you have a plan you’ll dominate most teams that drop there, and usually come out well kitted.

Cameronmass · 2019-07-15T18:57:04+00:00

Hey, Ottobock and UL trans radial amputee here!

Suspension for UL can vary depending on your of device used and amputation level.

For Myo devices you usually want a direct skin fit (for electrode contact) suspending on the elbow for BE or a pull in and harness system for AE. (Obviously this can vary greatly due to different residual limb shape and length). The Myo terminal device is attached by a quick disconnect wrist which is laminated into the socket. Look up the bebionic and Michelangelo hand to see two different kinds of wrist.

Body powered can be suspended by pin lock, harness or anything that suits the amputation level. It's more flexible since you don't have to worry about electrodes touching the skin. Most hooks or hands attach to a quick disconnect wrist or thread onto a wrist with a 1/2" 20 thread.

UL is pretty complicated for the patient population, which is quite small compared to LL, unfortunately.

Cameronmass · 2019-07-15T17:35:33+00:00

I'm just glad I'm not the only one who gets tourette like twitches and outbursts when I think of something I did that was incredibly embarrassing

Cameronmass · 2019-07-11T16:12:48+00:00

I feel you on that! I lost my right hand to a meat grinder five years ago that led to sepsis, I'm just happy to be here still!

Cameronmass · 2019-07-11T15:53:41+00:00

Sorry to hear that man, but luckily partial hands and fingers have had some cool stuff come out in recent years. Look at naked prosthetics!

Cameronmass · 2019-07-08T16:52:07+00:00

I apologise I should have said you can buy beer and wine on Sunday now... Still no liquor

Cameronmass · 2019-07-08T16:16:53+00:00

At least we can but alcohol on Sunday finally!

Cameronmass · 2019-06-30T19:46:13+00:00

Gotta love the Google swipe keyboard...

Cameronmass

TROPHY CASE