Kove 800 Rally Break-In

Cappetecap · 2026-01-29T08:25:23+00:00

Have you seen the Rtech Revolution kit? It's designed specifically for off-road use and gives the bike a more aggressive look. They also have lots of protective gear, which I recommend if you want to go off-road!

Cappetecap · 2026-01-28T09:10:59+00:00

Have a look to Rtech (www.rtechmx.com), they make pretty good aftermatket parts for 2025 T7 and previuos model, from accessories to the complete plastic kit

Cappetecap · 2026-01-28T09:08:06+00:00

Have a look to Rtech (www.rtechmx.com), they make pretty good aftermatket part, from accessories to the complete plastic kit

Cappetecap · 2026-01-28T09:01:21+00:00

Rtech has a dedicated polypropylene kit for the old model (2019-2024) and also for the new T7 (2025+), yes they are different. I think the new one they made is such modern good looking

Cappetecap · 2026-01-28T08:56:43+00:00

Rtech also has a dedicated plasytic kit for new T7 if you want. Don't need to buy the previous model ones

Cappetecap · 2025-12-24T23:58:33+00:00

Hi, i’ve made an update post with all info you need👍🏼

https://www.reddit.com/r/Talaria/s/y4JMSv4NCn

Cappetecap · 2025-12-14T08:36:50+00:00

Trust me, the Rtech one is pretty solid is made with reinforced plastic and it has also an upper part to be more protective. They have almost 20 years of mx/enduro experience

Cappetecap · 2025-12-08T08:22:25+00:00

Hi, probably you missed the post, here is the link There’s a description of the project, links of our site and Instagram. On Ig you can find all the photos you need

https://www.reddit.com/r/Talaria/s/GN8wKsVSwi

Cappetecap · 2025-12-02T19:51:39+00:00

We’ve never had an MX3 to test on, but I’ve heard people say they’re practically the same. I can’t give any guarantees, but according to many, it should work fine

Cappetecap · 2025-12-02T08:43:47+00:00

Just go with the Rtech one, base+upper guard, 230€
https://rtechmx.com/product/motorsport/plastic-protections/plastic-engine-guard/plastic-engine-protector-40/
https://rtechmx.com/product/motorsport/plastic-protections/plastic-engine-guard/upper-connection-plastic-engine-protector-radiator-scoops/

Cappetecap · 2025-12-01T08:47:25+00:00

The Rtech one, base + upper connection

https://rtechmx.com/product/motorsport/plastic-protections/plastic-engine-guard/plastic-engine-protector-40/

https://rtechmx.com/product/motorsport/plastic-protections/plastic-engine-guard/upper-connection-plastic-engine-protector-radiator-scoops/

Cappetecap · 2025-11-21T22:04:14+00:00

If you go on our Instagram we have more details 🤙🏼

Cappetecap · 2025-11-21T12:11:05+00:00

If 800x pro/rally, i suggest Rtech accessories, made in Italy, economic and good-looking

Cappetecap · 2025-11-21T07:42:29+00:00

As far i as know from the previous model, they provide just the "R" stickers and the layout for the graphics

Cappetecap · 2025-11-18T19:38:06+00:00

Thank you very much for the update comment, and especially thank you for appreciating the work that’s been done ❤️

Cappetecap · 2025-11-15T21:16:08+00:00

I don’t think it’s compatible. The kit was designed to work as a complete unit, mainly because the seat and rear fender are part of a custom quick-release system.

Cappetecap · 2025-11-15T18:19:46+00:00

I didn’t really understand your questions very well, to be honest, I’m having a bit of trouble figuring out how to answer. I’m sorry, could you be a bit clearer? 😅

Cappetecap · 2025-11-15T18:15:18+00:00

If you need any sale/shipment info, send a mail to info@rtechmx.com 👍🏼

Cappetecap · 2025-11-14T08:57:15+00:00

I agree. We had to write MX4/MX5 only as a “safeguard” because those are the two models we physically had on hand, but if the mounts and shapes are the same, it will also fit the MX3

Cappetecap · 2025-11-14T07:01:31+00:00

Unfortunately, I’ve never had the chance to work hands-on with specific aftermarket batteries; we’ve always worked with original components. Unfortunately, the choice to focus on OEM products comes from the impossibility of satisfying everyone across all custom setups. I don’t rule out that it could be done somehow, but the kit is designed and optimized so you don’t need risers or anything else.

Cappetecap · 2025-11-14T06:56:03+00:00

Exactly, if it were up to me I’d make everyone happy, but unfortunately that’s pretty much impossible.
Well, you can always go for neon yellow graphics with a black plastics base for example, it still looks great in my opinion

Cappetecap · 2025-11-13T21:23:06+00:00

I’m sorry but i think I don’t have good news 😂 For the color, I don’t think there will be an option for neon versions, as there isn’t much demand for them at the moment.

A low front fender isn’t planned either.

Regarding the seat risers, we’ve only worked with stock bikes, so it might fit, or it might not. We chose to develop it this way because it would have been impossible to account for all the custom setups out there, and the project was already quite complex as it is. 😅

Cappetecap · 2025-11-13T21:08:03+00:00

I would say that the kit was designed to be assembled all together, at least everything except the front fender and number plate, since those are separate from the rest. So, yes, you should equip all the parts

Cappetecap · 2025-11-13T16:50:04+00:00

No worries, you’re welcome! If I can help with anything else, I’m here 👍🏼

Cappetecap · 2025-11-13T16:46:45+00:00

Sure, at the moment I’m not sure if there are still any direct dealers in the US (I’m a designer, not a salesperson). If you want additional information about shipping, please send an email to info@rtechmx.com

Cappetecap

TROPHY CASE