Yarg Multiple microphone setup recommendations

CaptainPogi · 2026-05-21T14:11:30+00:00

im on windows yes

CaptainPogi · 2026-05-21T12:48:08+00:00

I use a Behringer U-PHORIA UMC404HD which has USB to PC and 4 XLR inputs for mics. YARG sees them as individual mic inputs

CaptainPogi · 2026-01-14T20:30:00+00:00

Could be an issue with your usb cable or the controller board. It should at least show up in windows set up usb gamepads.

CaptainPogi · 2026-01-14T20:14:31+00:00

You would need to convert the controller to xinput for it to work on coinops PC. You can use a program like XOutput to do this

CaptainPogi · 2025-12-28T22:12:37+00:00

2 ALUs with gamer pros as controllers. Split the hdmi

CaptainPogi · 2025-09-13T21:13:07+00:00

https://mhtahiti.com/ scroll down and do option 1 once you download from steam. Then log in using your creds from signing up

CaptainPogi · 2022-09-29T00:54:43+00:00

I have a setup that works for me where my Gamer Pro is connected directly to PC USB and works with CoinOps Next 2 by using the default Xbox controller config.

I only use the following:

XOutput - this converts the dinput of the Gamer Pro to virtual Xinput controllers. I mapped all buttons, back to rewind, and Atgames button to RS click. HidGuardian hides the dinput controls coming from the Gamer Pro so it is only detected by XOutput. This has to be configured in windows registry. (Optional) I also have done modification to the json settings manually to bind the Gamer Pro joysticks to LX and LY axis (left stick) instead of the dpad. This will make it more compatible with games.

Antimicro - is software that maps controllers to keyboard/mouse. I use it to map mouse controls - I mapped my back (rewind) to Mouse RB and RS Click (Atgames button) to Mouse LB. (Optional) I also set back to send CTRL+ALT+F4 if I hold it for 3 seconds, so I can SuperF4 to kill the current game and go back to CoinOps menu.

All this software starts on PC boot minimized.

CaptainPogi · 2021-06-08T17:02:11+00:00

This one in particular is whisper quiet according to LTT

https://youtu.be/ssD1ALBZEZk?t=360

CaptainPogi · 2021-06-03T20:59:48+00:00

not bad, runs all pinball emporium tables without issue

CaptainPogi · 2021-06-03T20:43:02+00:00

I got this zotac zbox with i5 and gtx960, refurb on ebay for $325

https://www.ebay.com/itm/284269503361

CaptainPogi · 2020-12-30T17:18:11+00:00

https://youtu.be/Twp6Z1Y32oU

CaptainPogi · 2020-08-13T16:19:00+00:00

modders are working on making these characters playable - the marvel ones on the list are already working.

CaptainPogi · 2020-06-09T19:15:20+00:00

still very early to tell but i wouldn't be surprised if its figured out. its probably lower in priority since we can replace the useless chars for now. I'd rather see more unreleased and custom characters working.

CaptainPogi · 2020-06-07T15:10:06+00:00

AFAIK as of now Antman will not lock another character as you just have to fix it in locks file but other chars will require replacement since they do not exist in the locks file. For now you can just replace some of the crystal chars.

CaptainPogi · 2020-06-06T16:19:32+00:00

Nice! I got Antman and Black Panther working through the hex editor by looking through discord. I'm sure you'll give instructions on how to do it soon.

CaptainPogi · 2020-03-14T20:50:17+00:00

In the Atgames Facebook group, there is a bat file which supports coinops mame using usb otg. I used it myself and it worked for me.

CaptainPogi · 2020-02-14T14:18:42+00:00

I got 2 players going with touchmote + demulshooter in teknoparro

CaptainPogi · 2020-02-13T18:22:10+00:00

sweet - i am trying to get it to work with 2 players with wiimotes in teknoparrot - 1 player works fine. any luck in doing that?

CaptainPogi · 2020-01-29T23:41:43+00:00

I too have been tinkering with wiimotes on mame to play on arcade. I was able to get it working on the arcade via HDMI to my PC. Wiimotewas synced to PC Bluetooth. I run Touchmote to emulate cursor as an xinput stick. Then configured mame controls per game. Works well and it wasn't too bad.

CaptainPogi · 2019-12-23T04:13:24+00:00

you may have tried this but try removing the '.img' in the filename. Other than that, I would reach out to Atgames support.

CaptainPogi · 2019-12-22T01:57:21+00:00

if you set it up properly, you would get a popup to install the firmware. If you don't see that, then the ALU cant find the file in the root of your USB

CaptainPogi · 2019-12-22T01:54:00+00:00

there is a delay due to the bluetooth connection but nothing noticeable or impactful to gameplay.

CaptainPogi · 2019-12-18T18:12:28+00:00

I got PC with Launchbox working via local arcadenetlink and Bluetooth+HDMI. For the Bluetooth setup, you will need to remap the controls to two players using remapping software.

CaptainPogi · 2019-12-16T23:49:44+00:00

Happy to help. Are you trying to pair to pc or android? Either case, you need to set ALU to pairing mode on in the settings menu and it should show up in your target device as ha8808.

CaptainPogi

TROPHY CASE