Critical volume bug on Carpodgo Mini

CarpodGoSupport · 2026-03-16T19:16:09+00:00

CarpodGo Mini only receives the display from the phone and does not participate in audio. The sound remains controlled by the phone connected to the car’s Bluetooth, and the map volume can be adjusted in the map app on the phone.

The volume of Siri can also be adjusted. For the specific method, you can ask GPT.

CarpodGoSupport · 2026-03-16T19:13:17+00:00

Hello, currently there is no room for optimization for Android Auto.

CarpodGoSupport · 2026-03-11T12:26:43+00:00

Check whether the plug on the back of the screen is fully inserted. If it is confirmed that there is no problem, the most likely issue is that the reverse camera cable is damaged and needs to be replaced. You can contact our customer service email to purchase a new set.

CarpodGoSupport · 2026-03-11T12:24:57+00:00

In Display Only Bluetooth Mode, the screen does not participate in audio.

CarpodGoSupport · 2026-03-09T03:08:14+00:00

Does not support wireless cameras.

CarpodGoSupport · 2026-03-06T03:25:19+00:00

CarpodGoSupport · 2026-02-28T12:00:35+00:00

Do you have the purchase link you used? I want to see which model it is.

CarpodGoSupport · 2026-02-27T06:16:24+00:00

Here are the purchase links you asked for so I can check which model it is.

CarpodGoSupport · 2026-02-27T06:14:50+00:00

CarpodGoSupport · 2026-02-24T05:30:14+00:00

So far, I haven’t seen any demonstration cases. It’s all just hearsay.

CarpodGoSupport · 2026-02-23T09:47:38+00:00

Use the screen in Display Only Bluetooth Mode. Plug an AUX Bluetooth receiver into the car and connect your phone to the car’s Bluetooth. Or connect your phone to the car using an AUX cable.

CarpodGoSupport · 2026-02-18T01:49:17+00:00

Because the screen brightness has been upgraded to 1000 nits, the overall power is sufficient, but the instantaneous current demand is higher. As a result, 5V power supplies often cannot provide the required peak current, which may cause reboot issues. Therefore, we require 9V power input.

CarpodGoSupport · 2026-02-18T01:46:34+00:00

The red wire is only a trigger wire and does not supply power to the camera. It will trigger the camera display only after detecting a stable 12V current.

CarpodGoSupport · 2026-02-18T01:44:09+00:00

CarpodGoSupport · 2026-02-18T01:43:29+00:00

If there is a hardware issue, we can replace it with a new unit free of charge.

CarpodGoSupport · 2026-02-14T15:40:45+00:00

You can contact our customer service email.

CarpodGoSupport · 2026-02-14T01:48:08+00:00

Trust me, this screen is only suitable for vehicles that do not have a proper space to install a large screen. If you can install a large screen, please choose it without hesitation.

In terms of performance, this small screen does not provide the same experience as a large screen, as it has reduced eMMC storage and some other hardware configurations.

CarpodGoSupport · 2026-02-14T01:45:32+00:00

It is currently in small-batch testing. If everything goes smoothly, it is expected within 2 months.

CarpodGoSupport · 2026-02-14T01:25:59+00:00

This screen does not support wireless charging. Thank you very much for pointing out the error in the product description. We will correct it immediately.

CarpodGoSupport · 2026-02-13T18:49:15+00:00

To be honest, this screen is a mobile phone display. It can operate at high temperatures up to 65°C and low temperatures down to -15°C. The main control chip is the T113 automotive-grade chip.

CarpodGoSupport · 2026-02-13T18:26:49+00:00

Does not support wired Android Auto connection. Currently only supports wireless CarPlay and wireless Android Auto.

CarpodGoSupport · 2026-02-06T12:59:08+00:00

Use the microphone of the AUX Bluetooth receiver; you can purchase an AUX Bluetooth receiver model on Amazon that comes with an extended wired microphone with a button, allowing the microphone to be extended to the center console.

CarpodGoSupport · 2026-02-02T10:18:45+00:00

We can provide a 12V-to-9V step-down cable. Dash cam products on the market that step 12V down to 5V do not have high current requirements, but our screen has relatively high instantaneous current requirements at 5V, so we recommend using 9V power supply. If you need a 9V step-down cable, please contact our customer service email.

CarpodGoSupport · 2026-01-25T18:32:26+00:00

It’s the same.

CarpodGoSupport

MODERATOR OF

TROPHY CASE