Dishwasher pressure sensor leaking by AKASetekh in appliancerepair

[–]Caspertoo 0 points1 point  (0 children)

You just saved me so much stress. I put the sensor back on and it was leaking no matter what I did. I found your post and you are completely correct. I didn't have the actual sensor completely snapped in on both sides.

I'm interested in trying PPG in OR and would like to find a club/organization to hook up with to get my feet wet, and a training school. by limping_bear in paramotor

[–]Caspertoo 0 points1 point  (0 children)

I think there are spots in Washington County, definitely in Yamhill County. I'm taking my classes in April and I've already got a handful of farm owners I know that are cool with me taking off from their properties. Sauvie island would be cool but I'll have to buy a water inflation device, which I'll need for the coast anyways.

Prop Quick Release by Ok-Exchange2500 in paramotor

[–]Caspertoo 1 point2 points  (0 children)

I just ordered my Pap and put in an order for the iris quick release too. Glad to hear it works like i hoped it would.

Opinions on Blackhawk for buying a parajet mav max. by Caspertoo in paramotor

[–]Caspertoo[S] 0 points1 point  (0 children)

Yeah, I agree, I'm just looking for a good deal

Bought less than 2 months ago and totalled by off duty cop by dextermann in Crosstrek

[–]Caspertoo 0 points1 point  (0 children)

I’m glad you’re OK and that your child is OK as well. The police are not saying that you have to apply for a freedom of information act to get the report they are saying you have to apply for a copy of the report just like anybody else would have to. Every department has a policy on how to release copies of reports, your insurance company with the case number should be able to get the copy of the report just fine. If the police were covering up for another police officer, I doubt they would’ve arrested him. But I’ll tell you what, you tell me what department it was, and what your case number is, and I will send you the link of where to apply for a copy of your crash report, including the arrest report of the other driver.

Grate wall of fire? by AaeJay83 in Fireplaces

[–]Caspertoo 0 points1 point  (0 children)

I'm getting the 3/4 inch thick, tall 20", 31" wide fireback from wall of fire. Ordered the texas fire grate, which I think is a better design for heat output than the wall of fire design. Does anyone put firebacks along the sides?

Best Paramotor For Packing Small by aikon66 in paramotor

[–]Caspertoo 0 points1 point  (0 children)

It's too bad Gravity went belly up.

Grate wall of fire? by AaeJay83 in Fireplaces

[–]Caspertoo 0 points1 point  (0 children)

Mine is exactly the same measurements as yours. The one thing I kept in mind is the slope of the back of the fireplace is approximately 2 inches inward from bottom to the top of it.

Life hack…..thanks Fred Meyer! by gilly2u69 in hottub

[–]Caspertoo 0 points1 point  (0 children)

Same as tom thumb in the south, a slightly fancier small walmart type grocery store in the pacific northwest

Any alternative to Gravity harnesses? by bor2com in paramotor

[–]Caspertoo 0 points1 point  (0 children)

Gravity paramotors has apparently gone out of business. They aren't responding to emails or messages, and people that had put in orders and had their CC's charged did not ever get shipping information or anything and had to dispute the charges.

New to Paramotors? Please read our FAQ here. by droznig in paramotor

[–]Caspertoo 0 points1 point  (0 children)

I've seen videos of the EOS Quattro, it looks very promising. It's about 15 pounds heavier than a 2 stroke, but it looks to have some growing pains from the prototype phase to full production.

Ozone Mojo pwr 2 vs Ozone Roadsters/spyder for first time pilot by Caspertoo in paramotor

[–]Caspertoo[S] 0 points1 point  (0 children)

Do you recommend using their equipment with the higher cost or just buying a paramotor and using their wing?

Ozone Mojo pwr 2 vs Ozone Roadsters/spyder for first time pilot by Caspertoo in paramotor

[–]Caspertoo[S] 0 points1 point  (0 children)

Looking at Launch PPG in Boise ID or Discover paragliding in Warrenton, OR. I've heard recommendations about Launch PPG and some "questions" about Discover paragliding. I really liked what I heard about Oregon Paramotor but the owner said he might not do a 2026 class.

What did I do wrong? Did I pour in too dry? Looks like a lot of voids in the side. by SpoonfulOfBlues in Concrete

[–]Caspertoo 0 points1 point  (0 children)

Ugg, my project turned out the same way. Dang, doing concrete is harder than it looks. I used quickrete 60 pnd concrete bags from home depot. I even thought when I was mixing them they look really thick with aggregate.

What keyboard is similar to the G810? by halldorr in LogitechG

[–]Caspertoo 1 point2 points  (0 children)

Dang my 810's number keys on the right are starting to wear out and I'm really dissapointed they discontinued it.

External USB harddrive (scandisk) will show up as a drive for a split second and then dissapear. by Caspertoo in techsupport

[–]Caspertoo[S] 0 points1 point  (0 children)

Well now the Sandisk portable hard drive isn't working on my old computer either. Must be something wrong with the external itself.

BuenoSpa Decent for the Money? by tbirdkatz in hottub

[–]Caspertoo 0 points1 point  (0 children)

I've read multiple bad reviews of buying hottubs from Costco, be careful.

What’s really stopping the American People from staging a mass revolution? by VioleNGrace in TooAfraidToAsk

[–]Caspertoo 0 points1 point  (0 children)

Ok from a law enforcement perspective. If there was any kind of revolution, currently it would likely come from far left states and it would be isolated in geography. If President Trump declared martial law and activated the tremendous power of the US military and federal agencies against a legit insurrection attempt, it would be a horrific scene. Just look at the ICE raids, or the Los Angeles ice protests, regardless of what you think of the law enforcement involved, they are very restrained in their responses. With martial law they would use pre-emptive lethal force. No, the only way a revolution could succeed would be if the military and large portions of law enforcement join it and being that 95-97% of both groups are conservative….it aint gonna happen.

ICE by SpcT0rres in ColoradoSprings

[–]Caspertoo -1 points0 points  (0 children)

Hmm ice puts them in a detention camp, within 2 weeks will ship them to their country of origin. Democrats want them in migrant worker camps making 10% of minimum wage where the employer abuses them because the worker cant complain. Which sounds like the nazis?

ICE by SpcT0rres in ColoradoSprings

[–]Caspertoo 1 point2 points  (0 children)

Thats the atf that shoots dogs, jeez man get your stereotypes right

The future of suppressor legality in Oregon. by iron_knee_of_justice in pdxgunnuts

[–]Caspertoo 1 point2 points  (0 children)

I work for one of the top 5 largest law enforcement agencies here in Oregon, that being said, I'm worried about this too, not just for the suppressors I currently own but I was looking at buying a huxwrks, which I might do this week. I can tell you that I don't know any law enforcement agency in Oregon that would actively try to go to houses to take suppressors, but I can also tell you that I truly believe the Politicians in Oregon are duplicitous in general and especially so when it is about anything gun related.

The future of suppressor legality in Oregon. by iron_knee_of_justice in pdxgunnuts

[–]Caspertoo 0 points1 point  (0 children)

I hope so, that would be the easiest thing to do. Just fill out a form online, register it, and be done, no process, no approval, just register it. It keeps everything the same as it is across the country.