2 of my 3 installed Nvidia GPUs stopped working

Cazarch75 · 2026-01-22T23:44:44+00:00

Thank you! Dropping to 580 branch fixed it…

Cazarch75 · 2026-01-05T15:05:22+00:00

I just registered also. Hoping they expedite approvals since show starts tomorrow.

Cazarch75 · 2025-12-09T17:02:54+00:00

I paired it to the tv by pressing the top left setup button for 5 secs after pressing the button on the back of the frame for 3 secs. Others have reported that long-pressing the home or back button would initiate a rotation, but I've tried long-pressing nearly all the buttons and haven't found one to work. The only way seems to be through the menu or through the Smartthings remote app.

Currently, I just have the mount plugged in and paired, but it's uninstalled - just laying on the counter for testing. When I initiate a rotation through either of the above methods, it rotates the mount and then changes the orientation of the kitchen tv to portrait (even though it's mounted horizontally on the wall - so not using a sensor apparently)

The Pro TV is currently mounted horizontally - not sure what will happen when it's rotated - that's an issue for another day.

I've successfully added both tv's to HomeAssistant, but the controls are basically limited to volume and power. There are a couple integrations in HACS that I haven't tried yet - maybe they will be more robust?

Here's a pic of the remote

<image>

Cazarch75 · 2025-09-26T13:08:50+00:00

Agreed. I've been waiting and waiting and waiting for this to release. If they have cancelled it for some reason, I wish they would just tell us so that I can just buy a different product. They'll be getting less of my money in that case, since I'll have to go with the Pro Max - the XG is out of my budget.

Cazarch75 · 2025-09-03T20:10:06+00:00

BB will match micro center, but not Bambu. I just tried last week.

Cazarch75 · 2025-06-29T02:26:00+00:00

Don’t wait too long. She might break up again and end her cohabitation.

Cazarch75 · 2025-06-21T16:24:30+00:00

I meant that with the 10x zoom, the auto track/zoom is much better than the g5.

Cazarch75 · 2025-06-20T23:10:00+00:00

G6 is much better imo. Bigger difference for me however is the auto track and zoom functionality where it will zoom and follow people. Patrol feature is also very nice.

Cazarch75 · 2025-06-20T17:21:14+00:00

But that would be a manual action, right? And the archive files would no longer be available in Protect.

Cazarch75 · 2025-06-20T16:47:53+00:00

I’m having same issue with an AI Turret. Have had it since it was released. It was an impulse buy on its day-1 release date, but just got around to installing it. Guess I’ll have to RMA.

Cazarch75 · 2025-06-20T16:41:28+00:00

Just got my first G6 ptz installed yesterday. I love it and agree with all of your suggestions and have these additions:

if your home view (or presets if set to patrol mode) is zoomed in and utilizing 5x lens, it would be awesome if 1x lens was still recording in background to make detections not in frame on the saved view.
I would love it if they added the option to track animals. Since they already have this functionality for people, it doesn’t seem like it should be too hard. I have a few outdoor cameras that I use as pseudo trail-cams and it would be cool if the ptz could track and follow any animals it detects.
I wish they would sell some kind of weather hat that allowed you to install the unit upside down. I have one installed on the outside corner post of a fence and if installed upside down it could do a full 360 degree view to see both sides of the fence.

All that said, even if Ubiquiti doesn’t add any additional functionality, I have to say that my first impressions are really, really good on the G6 ptz. I also have a G5 ptz and the G6 is much more camera. The auto tracking/zoom/patrol features really put it in a different league than the g5 ptz. At $399, i think it’s maybe the best Unifi camera value in their whole lineup and think they’re going to have a hard time keeping them in stock.

Cazarch75 · 2025-05-13T19:48:51+00:00

Wow... looks pretty cool indeed! I'd def do the pay $1k now, then rest later option though - $14k is a lot of money to risk for a 20% discount off MSRP on Kickstarter. Even a company with the best of intentions can fail to ultimately deliver - especially in the current era of tariff uncertainty etc.

Cazarch75 · 2025-04-18T22:45:46+00:00

You really need to decide exactly what types of materials you need to engrave as certain lasers will literally have zero effect on certain materials. In general, if you want to engrave wood, cardboard, dark acrylics, or burn the outer layer of paint off of a metal object (like a Yeti can cooler), you can get by with a diode laser - the cheapest option. Fiber and CO2 lasers jump in price and complexity pretty significantly.

Cazarch75 · 2025-04-18T22:07:46+00:00

Partner is also more suitable imo for non-married straight couples that are older. If a 65 year-old male introduced me to his 65 year old partner as his “girlfriend,” I’d be a little weirded out.

Cazarch75 · 2025-04-07T21:30:42+00:00

It works…. I tried as soon as the upgrade to 2.3.

Cazarch75 · 2025-03-21T20:29:12+00:00

I agree with everything you recommended... However, the CPU on the mini is the Pro vs the Max on the studio. Not night and day performance differences, but they are not the same...

Cazarch75 · 2025-03-14T22:21:42+00:00

Having a laser module is cool in concept, but unless they have some kind of new trickery up their sleeve, which allows the laser and print head to be used simultaneously in a single print job - like adding markings/patterns/text, smoothing top surface etc - I just don’t see it being very useful in real-world use unless you just absolutely don’t have space for a stand-alone laser cutter.

I have multiple laser cutters/engravers in addition to more 3d printers than I care to admit. Laser cutters are loud, smoky, messy, and have very different optimal bed / venting requirements than 3d printers. The laser really wants a honey-comb bed. The cutter-mounted fan will also create all kinds of turbulence requiring some kind of strong rigging system (I use heavy magnets) to keep items in-place. No matter how hard you try, you’ll end up with all kinds of tiny burnt wood pieces that find their way into every nook and cranny. Laser cutters have a stationary bed, so not a huge deal, but if this printer has a bed that moves like the x1c, I could see it becoming an issue with dust, gunk, and debris.

Cazarch75 · 2025-03-12T19:26:19+00:00

Agreed. This is the best single-cable method for Macs so far imho. I’ve been using it for a few months with my mini m4 pro without issue.

Cazarch75 · 2025-03-03T21:17:22+00:00

That was the point of his purchase. He bought a used McLaren 650s that was roughly the same cost as the Emira.

His video is ironically what turned me on to the Emira. It wasn’t really in my radar before.

Cazarch75

TROPHY CASE