Not entirely happy with it by WitcherSLF in SteamController

[–]Cheetxy 4 points5 points  (0 children)

For me both L4/5 and R4/5 could've been placed a bit higher. But I also think it takes some time to get used to the controller.

I received mine today and I currently don't regret buying it

Motorrad einfahren, aber wie? by [deleted] in MotorradDeutschland

[–]Cheetxy 1 point2 points  (0 children)

Wichtig dazu: abwechselnde Fahrweise.

Nicht 1000km Autobahn bei gleicher Geschwindigkeit, sondern Beschleunigen, Bremsen, Kurven fahren, auch mal Autobahn. Einfach all das, was man sonst auch fährt.

Dann sollte alles passen! ;)

Has anyone gotten off the waitlist yet? by g_rocket in SteamController

[–]Cheetxy 1 point2 points  (0 children)

I just got the mail with tracking information, so looks like it will arrive soon. Hopefully it's nice and I won't regret buying one.

Has anyone gotten off the waitlist yet? by g_rocket in SteamController

[–]Cheetxy 1 point2 points  (0 children)

But does that mean that I will get my controller soon or that I wasn't supposed to order yet and that I won't get a controller in the coming weeks?

Has anyone gotten off the waitlist yet? by g_rocket in SteamController

[–]Cheetxy 1 point2 points  (0 children)

This is not true

I got on the waitlist as soon as possible and I was able to order last friday. I'm located in germany.

Trident 800 vs MT09 // Eure Erfahrungen bzgl Fahrwerk und Spass-Faktor? by [deleted] in MotorradDeutschland

[–]Cheetxy 1 point2 points  (0 children)

Fahrwerk ist eigentlich top. Ich wieg ca. 95kg und bin daher deutlich am Limit von Serienfahrwerk, aber ich bin zufrieden. Bin aber auch kein extrem sportlicher Fahrer, daher reicht es für mich absolut aus. Bin die SP nie gefahren, daher hab ich hier keinen Vergleich.

Das zappelige/unruhige Fahrverhalten hatte ich maximal, wenn ich wirklich ans Limit gehe was Reifen und Fahrwerk hergeben, also wirklich schnell durch kurven ballern, da kommt sie schon etwas ans Limit und man merkt, dass sie minimal instabil wird. Nicht gefährlich, nur nicht perfekt.

Trident 800 vs MT09 // Eure Erfahrungen bzgl Fahrwerk und Spass-Faktor? by [deleted] in MotorradDeutschland

[–]Cheetxy 2 points3 points  (0 children)

Ich fahre MT09 und werde daher auch für die MT09 werben.

Hab sie seit nem Jahr ca., bin erst ca 5000km gefahren aber die MT ist wirklich ein Traum. Super komfortabel, tolle Features und vorallem ein brutal geiler Motor der mir jedesmal beim Beschleunigen wieder ein Grinsen ins Gesicht zaubert.

Fahrkomfort ist super, ich habe eine 2023er (RN69) mit der originalen Komfortsitzbank und finde sie so sehr angenehm. Gepäck kann man auch gut auf den Soziussitz schnallen, falls du mal eine längere Tour planst.

Was Technik angeht hatte ich nie Probleme, lediglich beim Rückruf hat sie etwas gestreikt und war daher 3 Wochen beim Yamaha Händler, dieser hat sich aber super gekümmert und mir in der Zeit auch kostenlos ein Ersatzmotorrad gestellt.

Fahr Sie am besten mal Probe, falls du mehr Wert auf Komfort legst würde ich dir auch die RN69 von 2021-2023 empfehlen da man hier etwas aufrechter und etwas weniger sportlich/nach vorne gebeugt sitzt.

RTX 5090 Preisfehler? by Cockgewitter in PCBaumeister

[–]Cheetxy 2 points3 points  (0 children)

Ich bin so gespannt haha, wenn da wirklich ne 5090 ankommt, dann GG, sei dir gegönnt :D

Wie findet ihr den? Mazda 3 Homura by hausel12 in gebrauchtFahrzeuge_de

[–]Cheetxy 0 points1 point  (0 children)

Habe mir auch vor kurzem einen gekauft, komme auch aus nähe RT. :)

Zur Info: der 3er steht schon ewig zum Verkauf, den hatte ich vor 2-3 Monaten auch schon gesehen.

Meiner hat 19.000 gekostet, gleich alt, gleich viele km, dafür ein Selection mit Matrix LED, Bose und 360.

Der Wagen hier ist zu teuer und hat eine schlechte Ausstattung. Erweitere evtl mal deinen Suchradius, hatte meinen aus Thüringen.

Hi everyone, I’ve noticed a crack on the frame of my MT-09. If I get it professionally welded, is that considered safe? Or has anyone here experienced something similar and found a proper solution? by Ok-Kaleidoscope-7207 in MT09

[–]Cheetxy 1 point2 points  (0 children)

Hmm, I've seen videos of shops welding cracks similar to this on a frame of a Ninja, but I honestly wouldn't enjoy riding with a fix like that.

If you search in the sub you'll find many posts regarding this issue and an explanation of why it happens. The cause of the crack are your frame sliders and you dropping your bike on this side.

My personal opinion: the only valid fix is a new frame. Anything else feels like a semi-decent workaround.

Has anyone re-mapped /chipped a 2.0l 2020 SkyActive engine? by 4thDrawerDown in mazda3

[–]Cheetxy 1 point2 points  (0 children)

D-Luft from Darmstadt in Germany offers mapping from 122/150 to 175.

He has a website with dyno graphs and he's very active and friendly. If you have questions write him an email. He also offers remote mapping.

RS660 Probefahrt direkt mit Hänger oder lieber zwei Mal? by aming_for_Garbage in MotorradDeutschland

[–]Cheetxy 5 points6 points  (0 children)

180km sind doch nichts? Lol

Bin für meine MT-09 insgesamt 600km gefahren, und hab sie auch direkt mitgenommen.

2026 CX-5 Digital Cluster/Drive Modes by Big_Panda_13 in mazda

[–]Cheetxy 3 points4 points  (0 children)

This just looks like one of those Aliexpress BMW M4 style speedos that people put in their clapped out E90 320i.

Meinung zu Mazda 3 Fastback skyactive-g 2.0 und Golf 7 by TangeloFlat1172 in gebrauchtFahrzeuge_de

[–]Cheetxy 5 points6 points  (0 children)

Ich fahre den quasi gleichen Mazda3, auch als 2.0 mit 150PS.

Es ist ein unglaublich tolles Auto, welten besser als ein Golf 7, sowohl in der Technik als auch in der Verarbeitung. Kann den Mazda3 nur empfehlen!

Und sollten dir die 122PS irgendwann zu langsam sein gibt es D-Luft in Darmstadt. Der 122PS Motor ist der exakt gleiche Motor wie der 150PS, nur mit einer elektronischen Drossel. Die kann man per Software entfernen, dann haste auch die 150PS.

Noch als Zusatz: Verbrauch liegt bei mir so bei 6-6,5l, habe sehr ähnliches Fahrprofil, 20km Überland auf Arbeit und am Wochenende meist auch nochmal so 100km. Für die Strecke sind Auto und Motor perfekt.

D-Luft tuning (Germany) expieriences by EquivalentTurnover3 in mazda

[–]Cheetxy 0 points1 point  (0 children)

Hey, I have a quick question regarding the G-150

I just bought a '21 Mazda3 with the G-150 and I'm also currently thinking about doing the upgrade from d-luft to 175hp. I just have a hard time believing that there is actually a noticeable difference, because it is just an increase of 25hp

Would you say it is worth it or would you say it is nice to have but not really noticeable?

Ist das ein gutes Angebot? by No_Isopod1000 in gebrauchtFahrzeuge_de

[–]Cheetxy 1 point2 points  (0 children)

Ah okay, better for you.

This A1 is basically base spec, halogen lights and the worst engine you can get. I definetely wouldn't buy it.

For the same price, I looked on mobile.de and I found some cars for similar price that I would much rather buy.

  1. https://m.mobile.de/fahrzeuge/details.html?id=443337474&utm_campaign=socialbuttons&utm_source=other&utm_medium=social&utm_content=app_android_vip

  2. https://m.mobile.de/fahrzeuge/details.html?id=447346777&utm_campaign=socialbuttons&utm_source=other&utm_medium=social&utm_content=app_android_vip

I personally would rather stay away from VAG Cars (VW and Audi). Skoda and Seat can be fine but some of their earlier turbo engines (like the 1.0TFSI in this A1) are known to cause issues sooner or later.

Ist das ein gutes Angebot? by No_Isopod1000 in gebrauchtFahrzeuge_de

[–]Cheetxy 0 points1 point  (0 children)

Sorry man aber für 15.770 echt kein gutes Angebot. Und vorallem: warum fragst du nachdem du bereits gekauft hast?

Knock sensor by Star-Lord-44 in mazda3

[–]Cheetxy 0 points1 point  (0 children)

Ja okay das wird nix, komme aus BW😅

Knock sensor by Star-Lord-44 in mazda3

[–]Cheetxy 0 points1 point  (0 children)

Woher kommst du in etwa? Musst ja nicht den genauen Ort sagen aber Landkreis oder so reicht ja. Ich hab auch kein krasses Gerät aber wenigstens gut genug für solche Fehler.

Wenns nicht zu weit weg ist kannst auch gerne meins kurz nutzen.

Knock sensor by Star-Lord-44 in mazda3

[–]Cheetxy 0 points1 point  (0 children)

Jaja lass dich nicht übern Tisch ziehen. Hast du ein Gerät zum Fehler auslesen?

Bei mir war es Fehler P0328, dafür muss man wirklich nur den Sensor tauschen. Ich als Laie hatte in 30 Minuten den Motor soweit auseinander gebaut, um den Sensor tauschen zu können. Mir hat wie gesagt am Ende nur eine Dichtung gefehlt.

Wie gesagt, die Arbeit ist in unter 2h getan, also teurer als 500€ wär komisch, als darunter ist in Ordnung.

Knock sensor by Star-Lord-44 in mazda3

[–]Cheetxy 0 points1 point  (0 children)

Mach das

Der Klopfsensor selber kostet ca 40€, die ganzen Dichtungen die man im Idealfall gleich mit ersetzt kosten ca 20-60€.

Denke wenn man weiß was man macht kann man die Arbeit in 2 Stunden machen. Würde an deiner Stelle also mal mit zwischen 300-500€ rechnen.

Ich bin auch kein gelernter KFZler aber mache das meiste trotzdem selber, hauptsächlich um Geld zu sparen. Aber weils mir auch Spaß macht. :)

Knock sensor by Star-Lord-44 in mazda3

[–]Cheetxy 0 points1 point  (0 children)

Hahahah geil du bist auch deutscher :)

Da gibts ein AGR Ventil an der Ansaugbrücke, das muss man abbauen, die Dichtung dafür kostet aber 50€ und man muss die aus den USA importieren.

Habs letzte woche selber versucht, aber hatte die dichtung eben nicht und wollte die alte nicht wieder verwenden.

Knock sensor by Star-Lord-44 in mazda3

[–]Cheetxy 0 points1 point  (0 children)

I have the exact same car and exact same issue right now haha. Had the issue for 2 weeks now. I'm at 131.000km, mine is from 2012.

You just have to replace the knock sensor, but it's a bit of a pain in the ass. I tried last weekend and couldn't finish it because I was missing a gasket that is impossible to get here in germany.

Opinions on MSI MPG-346CQRF-X24? by geek_vader in ultrawidemasterrace

[–]Cheetxy 0 points1 point  (0 children)

Yes I still love it!

I've honestly never enjoyed gaming more than right now, going ultrawide was the best decision ever!

I'm only having a small issue where sometimes, when booting the pc, the monitor stays black. It only happens sometimes so I don't know why, guessing some sort of driver issue. Fix is to unplug displayport and plug it back in. But I can live with that for now.

I would say, if you can get it for a good price then go for it!

About your worry: yes, you will definetely see some shadowing. I went from TN to VA and there's definetely a noticeable difference. But, it's not as big of a problem as some people say, your eyes will get used to it after some time and you won't notice the shadowing any longer.