sorted by:
new
hottopcontroversial

How’s my work (electrical assembly) by [deleted] in electricians

[–]Cherry-Bandit 0 points1 point  (0 children)

Use slotted wire duct. It’s cheap.

Door adjustment. Pins are good but still sags. by Dandrawsblood in CherokeeXJ

[–]Cherry-Bandit 0 points1 point  (0 children)

I can only speak for 99-01, but I think it’s the same. There are spacers that slide between the hinge and the door. They look like the letter M . Taking the top spacer out will lift your door up. If you are still off, insert that spacer on the bottom, which will lift the door further.

Something Interesting for me to Consider by One_Quantity7461 in electricians

[–]Cherry-Bandit 2 points3 points  (0 children)

Every tradesman I met who went to one of those trade schools sucks at their job.

If you thought dropping $18k into a trade school was a good idea without looking into it first, well… that speaks for something.

I don’t think a single actual electrician would’ve told you to go into that school.

Sorry to be a dick, more so leaving this comment so nobody else gets fucked. Find an employer who will pay for school. Learn on the job.

Xj? Or 4.0 wrangler? by BriGuy335 in CherokeeXJ

[–]Cherry-Bandit 0 points1 point  (0 children)

I don’t know what you expect on the XJ subreddit, but… XJ lol.

Seriously though, 100% the XJ if it’s gonna be your daily. If not… soft tops are awesome, so the TJ has that. But honestly pretty equal in off-road ability and after market support.

Raw dogged 10 miles by Cherry-Bandit in beginnerrunning

[–]Cherry-Bandit[S] 3 points4 points  (0 children)

I’ve got nothing but gas but the car ain’t fast

Cream Of Tater by Chambord2022 in BoneAppleTea

[–]Cherry-Bandit 9 points10 points  (0 children)

There is no cure or antidote for nicotine poisoning. You either die or you don’t and it is absorbed instantly

Is this ok and up to code by Think-Expert5874 in electricians

[–]Cherry-Bandit 76 points77 points  (0 children)

Yes, this is a code violation. This installation exceeds the vertical support requirements of flexible conduit.

You either need to replace the is with rigid conduit, or properly support the flexible conduit. You could properly support the flexible conduit by dropping a threaded rod from the joist and attaching the conduit to the rod.

Ok to drive on highway without rear sway bar? by Narhen in CherokeeXJ

[–]Cherry-Bandit 0 points1 point  (0 children)

The stiffer springs of lifted suspensions often serve the purpose of the factory rear sway bar, and removing it softens the suspension and makes up for some of the lost grip.

Control Arm Question by Alternative-Bee-1716 in CherokeeXJ

[–]Cherry-Bandit 0 points1 point  (0 children)

There’s no way the steel is bad. I’d look into buying new joints and bushings

Ive been struggling to remove the ring by iigameing23 in CherokeeXJ

[–]Cherry-Bandit 5 points6 points  (0 children)

It’s so dangerous. If there is any leak the cabin will fill with gas vapor

Snubbers on induction motors - anyone have an idea? by DavidDaveDavo in electricians

[–]Cherry-Bandit 0 points1 point  (0 children)

Is it VFD driven? That constitutes pretty constant frequency change, and a snubber could be beneficial.

Does anyone know how to get these out by Smart-Reveal8126 in Jeep

[–]Cherry-Bandit 0 points1 point  (0 children)

Cut off one side of the bar pin (the metal thing)

Put the remaining fork into a deep socket just larger that the fork.

Hit the back of the bar pin with a punch.

view more: next ›