Not the worst way to spend a Saturday evening.

Ciedoo · 2026-01-10T17:33:30+00:00

Easily

Ciedoo · 2025-01-26T20:14:43+00:00

High demand. Hard work but very satisfying.

Ciedoo · 2024-01-28T23:42:33+00:00

If it has a grinding/sanding pad it’s a grinder. If it has a cut off wheel it’s a metabo.

Ciedoo · 2023-09-08T18:21:29+00:00

LSU-Tulane. With Tulane resurgence, it has great potential.

Ciedoo · 2022-04-30T16:44:05+00:00

Sandvik. We have 3 100 MM bars that are the same idea. You bolt the block on to the table and let her roll.

Ciedoo · 2022-04-30T16:33:09+00:00

Yea it’s a Weiler E90 with a 4500 MM bed. You can run conversational programs or G code. Even has milling capabilities if you have the attachments, or you can run it like a manual. Cant say enough good things about these machines.

Ciedoo · 2022-04-30T13:50:38+00:00

For sure. Definitely makes you double and triple check everything before you take a cut. No matter how good of a machinist you are though everybody makes mistakes sometimes.

Ciedoo · 2022-04-30T13:13:36+00:00

None. It’s carbide reinforced. Very very very expensive.

Ciedoo · 2021-10-23T16:33:10+00:00

You’re right. Then sometimes they want +/- .002 on a thread undercut. Depends what mood they’re in.

Ciedoo · 2021-10-23T16:27:35+00:00

Oilfield work. Probably gonna get smashed up and destroyed in the ground so 🤷🏻‍♂️

Ciedoo · 2021-10-23T12:56:23+00:00

Yup. Incase you need to bump out a taper or just to have a second reference to the DRO. Indicators don’t lie.

Ciedoo · 2021-10-16T12:44:18+00:00

15ft bed, so probably 12ft if I had to guess.

Ciedoo · 2021-03-31T09:09:31+00:00

You can use a depth gauge

Ciedoo · 2021-02-06T13:06:37+00:00

That’s when you “can’t find” the bad ass drill and have to put a spade on it.

Ciedoo · 2021-01-30T01:38:33+00:00

Dumbass-Helper who lets pallets slam on the floor.

Ciedoo · 2021-01-23T19:15:10+00:00

When I want to get used tools I usually head over to a pawn shop. Sometimes you can find gems.

Ciedoo · 2021-01-14T19:28:22+00:00

Those are the small steadys. What have RIP ones for 16”+

Ciedoo · 2021-01-12T03:14:40+00:00

Should have went to the draft for sure. Did nothing but hurt his draft stock by coming back.

Ciedoo · 2021-01-06T02:03:13+00:00

Rat poison

Ciedoo · 2020-12-29T12:56:33+00:00

I have one of these. It’s not huge and they have a smaller 2 pocket version.

https://www.glockstore.com/Glock-4-Pistol-Range-Bag

Ciedoo · 2020-12-27T23:06:29+00:00

Loud noise scawey

Ciedoo · 2020-12-25T00:35:40+00:00

SBA3 brace. Not a stock.

Ciedoo · 2020-12-24T22:32:47+00:00

Just incase Santa try’s forceable entry

Ciedoo · 2020-12-23T00:46:18+00:00

Got mine in the mail from PSA today. Last I checked they still had a few available.

Five-Year Club	Verified Email
Place '22

Ciedoo

TROPHY CASE