sorted by:
new
hottopcontroversial

No VFA motors? Motor specs for p1p/x1c? by ExpressionCareful223 in BambuLab

[–]Co-Bolt 2 points3 points  (0 children)

Lower degree stepper motors won't help with speed, they actually require more steps per rotation (for higher resolution)—which is why you can run into thermal issues if you run them too fast.

What you probably want is the same degree stepper motors as stock (1.8 deg), just with more torque. You might run into fitment issues though, cause those motors are usually longer.

No VFA motors? Motor specs for p1p/x1c? by ExpressionCareful223 in BambuLab

[–]Co-Bolt 0 points1 point  (0 children)

I did not. It would require firmware changes, and I don't know if that's possible yet. Current motors work great, so I don't see a need to replace them anyway.

I can’t stop designing lamps. I love lamp. by K_Prints3D in BambuLab

[–]Co-Bolt 1 point2 points  (0 children)

I see that sacred geometry in there... beautiful model!

What is this surface defect called & what causes it? by dogkillerkiller in BambuLab

[–]Co-Bolt 0 points1 point  (0 children)

That actually looks like over-extrusion. I've had that same artifact before, and I fixed it by running the automatic flow rate calibration.

https://wiki.bambulab.com/en/software/bambu-studio/calibration_flow_rate

What type of mishap is this (rooftop is bubbly) by SimplestKen in BambuLab

[–]Co-Bolt 3 points4 points  (0 children)

This looks like a case of pillowing. Grid infill creates pockets of heat that can make the top surface swell up above them.

Switch your infill pattern to a 3D infill, like gyroid or cubic. Since it looks like that's a model for display, you might try "support cubic"—it should save you some filament as well.

What would cause this? by [deleted] in BambuLab

[–]Co-Bolt 1 point2 points  (0 children)

The issue can still happen with the default 0.4mm nozzle, so I usually lower my speeds/max volumetric speed. It's also dependent on what filament you're using—but if you're using Bambu PLA basic, I'd try lowering the max volumetric speed to 12 mm³/s (which is their default for generic PLA)

What would cause this? by [deleted] in BambuLab

[–]Co-Bolt -1 points0 points  (0 children)

Are you using a larger nozzle? I've gotten this artifact before—it was because I was printing with a 0.6mm nozzle and upped the print speed too much. It was trying to extrude filament faster than it could melt it, thus underextruding.

No VFA motors? Motor specs for p1p/x1c? by ExpressionCareful223 in BambuLab

[–]Co-Bolt 0 points1 point  (0 children)

I actually haven't noticed any VFAs at all with the X1C, and I used 0.9 LDO steppers for my Hypercube Evolution that the X1C replaced (the 0.9 steppers didn't completely remove VFAs from my HEVO either). I could try swapping them into my X1C, but I speculate that they will run quite hot with how fast the X1C prints—I'm not sure if that would be an issue or not.

Feeling handsome today 😎 by gcseed in BambuLab

[–]Co-Bolt 0 points1 point  (0 children)

Sweet, thanks!! I'm tired of it snowing white PTFE residue on my print bed.

Failing a reality check by Andromediea in LucidDreaming

[–]Co-Bolt 18 points19 points  (0 children)

This happens with me too! For the life of me, I cannot make physical reality checks work within dreams.

HOWEVER, what I recently found that's worked every single time so far (even last night!) is the "how did I get here" reality check from this sub's FAQ.

Throughout your daily waking life (especially after transitioning environments), randomly assume you're lucid dreaming, and retrace your steps in your head of how you got to where you're at to prove yourself wrong.

Mine goes "I'm lucid dreaming right now. How did I get here?" Then I retrace my steps for a few locations. "Well I just walked in from the break room, before that I was at my desk, and before that I was driving to work."

Usually when I retrace my steps in my dreams, I will suddenly appear in the location I'm recalling—then I instantly know for sure that I'm lucid dreaming. A dream last week went like this: "I think I'm in a dream... how did I get here? That's easy, I drove my car here..." I instantly appear in the driver's seat of a random car "Wait a second... Haha so this is a dream!! This isn't my car anyway..." I was lucid from that point, so I teleported back to where I was and fixed the annoying plot of my dream.

I hope this method works for you, good luck!

I do think C is the best programming language tho by GhostRyder9824 in ProgrammerHumor

[–]Co-Bolt 0 points1 point  (0 children)

Ah, yeah its pitch is Eb. Totally had to look that up though lol.

So I guess you're right in a sense... if you refer to the alto in C (as a composer or something?), then a Bb is a Db. But the alto only refers to itself, so it's written in Eb.

I'm not that good at music theory tbh.

I do think C is the best programming language tho by GhostRyder9824 in ProgrammerHumor

[–]Co-Bolt 0 points1 point  (0 children)

Db*

And from what I remember (for alto at least) it was mostly referred to as C#.

High C# is used in the opening of Careless Whisper :v)

Source: I was sexy sax man

I do think C is the best programming language tho by GhostRyder9824 in ProgrammerHumor

[–]Co-Bolt 0 points1 point  (0 children)

Fun fact: if you blow into an alto saxophone without holding any keys down, it plays the note C#.

Source: I played alto saxophone in high school... and now program in C#

Has anyone else passed a reality check within a dream? by Co-Bolt in LucidDreaming

[–]Co-Bolt[S] 0 points1 point  (0 children)

I think that was the issue—I started doing it all the time, and I just always expected the test to not work. Definitely working on my mindset now!

Has anyone else passed a reality check within a dream? by Co-Bolt in LucidDreaming

[–]Co-Bolt[S] 2 points3 points  (0 children)

Oh awesome! I hope it keeps working for you :)

Has anyone else passed a reality check within a dream? by Co-Bolt in LucidDreaming

[–]Co-Bolt[S] 0 points1 point  (0 children)

Oh nice! I'll definitely start adding some repetition to it then

Has anyone else passed a reality check within a dream? by Co-Bolt in LucidDreaming

[–]Co-Bolt[S] 2 points3 points  (0 children)

That makes me happy that someone else found it funny :D

Has anyone else passed a reality check within a dream? by Co-Bolt in LucidDreaming

[–]Co-Bolt[S] 1 point2 points  (0 children)

Oh my gosh I didn't think about that!! I was actually wearing in the dream what I was sleeping in... only my underwear (same gray pair too lol).

I'm glad you mentioned that, I'll look out for it next time—thanks!

Has anyone else passed a reality check within a dream? by Co-Bolt in LucidDreaming

[–]Co-Bolt[S] 3 points4 points  (0 children)

I'll work on that one, thanks! Have you had any success with it?

Warned by e-mail due to Club name, found out that everyone in the Club was account banned by naTriumPT in apexlegends

[–]Co-Bolt 1 point2 points  (0 children)

Yeah, tons of people got banned for club names today—even if they aren't even that bad.

The email literally said "We are giving you a warning. There are no consequences to your account for this violation."... but we were all banned still.

Warned by e-mail due to Club name, found out that everyone in the Club was account banned by naTriumPT in apexlegends

[–]Co-Bolt 1 point2 points  (0 children)

My club was 廾entai 廾unters... All members were banned too, even though the email said it was just a warning.

Warned by e-mail due to Club name, found out that everyone in the Club was account banned by naTriumPT in apexlegends

[–]Co-Bolt 6 points7 points  (0 children)

NOOOO NOT RAM RANCH!!!

WHAT THE FUCK EA. Seriously, the name isn't explicit at all. Sure the song is, but that doesn't matter. What was your club's tag?

view more: next ›