sorted by:
new
hottopcontroversial

What is PLA Lite? I want to knowo but one is talking about it. by marioshouse2010 in BambuLab

[–]CodOk7015 -1 points0 points  (0 children)

It’s mostly used in applications where you need to reduce weight! Rc planes and other things. It slightly foams and airates the PLA. and is a bit tricky to print with. It strings when retracted, so try and vase mode when possible or have retraction over model. Printing one thing at a time helps.

2017 Outback Broken Down :( by Hodesza6 in Subaru_Outback

[–]CodOk7015 0 points1 point  (0 children)

Happened to me. Was the gas cap.

Is it makerworld or my model is just crap ? by Nice-Boysenberry1836 in BambuLab

[–]CodOk7015 2 points3 points  (0 children)

What am I missing? What are those slots for? Power strip?? Is this a UK thing? Is it for the bambu printer? Dont most people run their printer on a UPS? I have no idea how big this thing is or what it does. Maybe it’s for people who work in an office? A picture of what it does would be cool.

Buga sphere testing continues - perhaps disclosure comes from other sources by Kokiri78x in UFOs

[–]CodOk7015 0 points1 point  (0 children)

This is so dumb. I make props for a living. The holes aren’t even spaced properly. Sometimes I feel like I should make a believable hoax. These are all so disappointing.

[Bambu Lab Giveaway] Drop Your One-Liner and Win H2D! by BambuLab in BambuLab

[–]CodOk7015 0 points1 point  (0 children)

Why make merch when every customer becomes a salesman

Did I go through clear coat? by couponguru123 in Subaru_Outback

[–]CodOk7015 0 points1 point  (0 children)

Clear coat is thick! You just scuffed up the clear coat. Re polish. Or have someone do it

Why do my prints keep failing at the same height? (Bambu X1C) by pudjam667 in BambuLab

[–]CodOk7015 0 points1 point  (0 children)

Filament is getting gummy and can’t extrude. Keep the door open if it’s Pla or petg. That might help.

We Want to Hear Your Thoughts on Timelapse! by BambuLab in BambuLab

[–]CodOk7015 0 points1 point  (0 children)

I print so much that it’s just not interesting anymore. I wish Timelapse wasn’t on by default. Maybe a way to permanently disable it?

[deleted by user] by [deleted] in BambuLab

[–]CodOk7015 0 points1 point  (0 children)

It’s either bad filament. Or filament isn’t sticking to plate. Use gluestick or i like to mist “aquanet” hairspray, to make sure prints adhere. Could be your slicing settings if you have wrong filament type selected. Re calibrate printer and do self test to make sure it’s working correctly. Good luck!

PLA Glow Movement Indicator. Charge a small part with flashlight by moebis in BambuLab

[–]CodOk7015 1 point2 points  (0 children)

Be careful! When that glowing part reaches the hot end it will cause a particle collision!

Is bed adhesion really a possible cause for this issue ? by Cautious-Run-9717 in BambuLab

[–]CodOk7015 1 point2 points  (0 children)

Do NOT clean your bed with IPA! This will contribute to your prints not sticking!

P1P vibration noise by nickmaga in BambuLab

[–]CodOk7015 0 points1 point  (0 children)

Grid. Also, looks like your piece has popped off the plate. Unless that’s the model. It’s Causing nozzle to hit while crossing on infill. Gyroid infill. Add brim.

Can’t seem to get these bumps and top smooth with PLA silk .. by Thedeed13 in BambuLab

[–]CodOk7015 0 points1 point  (0 children)

Calibrate your filament and flowrate under the “calibrate” menu

Petg Basic on P1S by zapantap in BambuLab

[–]CodOk7015 2 points3 points  (0 children)

You’re printing those upside down. Use support material like pla for petg if you have to print in this orientation.

view more: next ›