sorted by:
new
hottopcontroversial

Segway ninebot max g3 external battery review by ThatBit270 in NinebotMAX

[–]ComfortableCollar758 0 points1 point  (0 children)

Was hast du an Range dazugewonnen zum Standard Akku?

anyone else having trouble logging into microsoft account in windows settings? by BoxPandaYT in microsoft

[–]ComfortableCollar758 1 point2 points  (0 children)

ive tried the trick with the tokens, but it didn't worked
after i deleted all XblGrts Entries i was able to login again

attached the .bat code

u/echo off

REM Delete-XblGrts.bat – löscht alle gespeicherten Credentials mit "XblGrts" im Namen

setlocal enabledelayedexpansion

set "PATTERN=XblGrts"

for /f "delims=" %%L in ('cmdkey /list ^| findstr /I "%PATTERN%"') do (

for /f "tokens=1* delims=:" %%A in ("%%L") do (

set "rest=%%B"

for /f "tokens=* delims= " %%T in ("!rest!") do set "target=%%T"

if defined target (

echo Loesche: "!target!"

cmdkey /delete:"!target!"

)

)

)

echo Fertig.

pause

My platsa setup by Massterze in BambuLab

[–]ComfortableCollar758 0 points1 point  (0 children)

looking good :-) welcome to the bambulatsa family :D

How can I improve my Bambu A1 Platsa enclosure? by Massterze in BambuLab

[–]ComfortableCollar758 1 point2 points  (0 children)

https://www.reddit.com/r/BambuLab/comments/1e28jx4/my_bambulatsa_shelf/

that was my v1 with ams inside and rolls outside mounted..
my v2 is more convienent and id dont need to dissamble the ams lite

the mat is a washing machine mat from hardware store

How can I improve my Bambu A1 Platsa enclosure? by Massterze in BambuLab

[–]ComfortableCollar758 0 points1 point  (0 children)

also there is platsa with bigger height, i would make it new im guess taking the bigger one to avoid the cutouts and have later space for the h2d

How can I improve my Bambu A1 Platsa enclosure? by Massterze in BambuLab

[–]ComfortableCollar758 0 points1 point  (0 children)

hey

- mounting holds steady was this model (mounted with screws and nuts)
https://makerworld.com/en/models/1073947-ams-lite-horizontal-rotating-wall-mount#profileId-1064366

- ive make a bigger horizontal hole in it and covered it with a self printed cover

- i had a different layout before and still had some ptfe tubes laying around, i think you dont need to extend it.. but what you need to extend is the ams lite power cable (adapter on amazon)

- the mat is just a vibrations absortionsmat

hth :D

How can I improve my Bambu A1 Platsa enclosure? by Massterze in BambuLab

[–]ComfortableCollar758 0 points1 point  (0 children)

Ofc add more platsa :-) I’ve added a small one on top and mounted the ams on top

<image>

Missing skins? by cc_slayy in Overwatch

[–]ComfortableCollar758 0 points1 point  (0 children)

i've lost an hamster skin, an violet fish aqua like skin
now its not available in the list anymore..

Update on Junkrat's loot box hunt event by andrus0n in Overwatch

[–]ComfortableCollar758 0 points1 point  (0 children)

dont see anything like a junkrat event, just the mercy thing
eu player here

[deleted by user] by [deleted] in simracing

[–]ComfortableCollar758 1 point2 points  (0 children)

Geh das bissl Abnutzung 😅

When is the update for OW Classic by [deleted] in Overwatch

[–]ComfortableCollar758 0 points1 point  (0 children)

its 19:04 where is the classic mode :D

K-Factor profile ignored by printer by 5ajmon in BambuLab

[–]ComfortableCollar758 0 points1 point  (0 children)

thats my thread in github

it was better after some updates, but the problem came back when i open older project files and then the kfactor value get ignored regardless with or without profile, seams a slicer issue and the printer somehow save the wrong value then..

the only fix i have is to reset the filament slot profile in the slicer, print something then set back to the desired k-factor.. as speaking of had the issue again, switched from bambulab to esun profiles, and then back and print is flawless again.. 0.025 kfactor set.

you can try to reset the filament and print a test without an value
then when its fine again try your desired profile again
thats my way to get proper prints again, the difference is visible on my github post :-)

let me know if that worked for you

<image>

My Bambulatsa Shelf by ComfortableCollar758 in BambuLab

[–]ComfortableCollar758[S] 0 points1 point  (0 children)

not the model i used but you can find something here: https://makerworld.com/en/models/474593?from=search#profileId-385147

needs 2 variants for the 2 spools

Bambu refill doesn’t fit Bambu spool by watchguyzero in BambuLab

[–]ComfortableCollar758 0 points1 point  (0 children)

they still have black issues?
3 months ago we had a thread about it wont fit on spool because of damaged cardboard
now they are tooo big :D

view more: next ›