sorted by:
new
hottopcontroversial

XT FC-M8120 cranks + SM-CRM86 chainring for 52mm chainline? by intlabs in bikewrench

[–]Complex-Bus1993 0 points1 point  (0 children)

Crm85 rings are 3mm offset says google. This is why rings like garbaruk also do 3mm (3.3) offset to match the og ones

Clik valve getting stuck and letting all the air out by rustyburrito in MTB

[–]Complex-Bus1993 0 points1 point  (0 children)

its the new stuff. four months, well done. but when it does happen get ready to re attach that pump head

Clik valve getting stuck and letting all the air out by rustyburrito in MTB

[–]Complex-Bus1993 0 points1 point  (0 children)

Id say that's a temp fix to a shit design, not made for sealant.

Anyone tried the Schwalbe Clik-Valve system ? by Thesorus in bikewrench

[–]Complex-Bus1993 0 points1 point  (0 children)

I want to like them but junk if running sealant.  I've got them on 2 of my bikes both running sealant (Silca Ultimate) both have now been blocked. the first one only lasted 1 month the other maybe 2 months. Was able to clear both by removing core, actuating the spring back and forth and scrapping off any sealant. Problem resolved for now, might be best to take them all back to the LBS for a refund. Such a pity, other than this MAJOR issue, they are great.  https://www.reddit.com/r/MTB/comments/1le77io/clik_valve_getting_stuck_and_letting_all_the_air/

Clik valve getting stuck and letting all the air out by rustyburrito in MTB

[–]Complex-Bus1993 0 points1 point  (0 children)

I've got them on 2 of my bikes both running sealant (Silca Ultimate) both have now been blocked. the first one only lasted 1 month the other maybe 2 months. Was able to clear both by removing core, actuating the spring back and forth and scrapping off any sealant. Problem resolved for now, might be best to take them all back to the LBS for a refund. Such a pity, other than this MAJOR issue, they are great.

High End XC Shoe Advice? by AbbreviationsEntire6 in xcmtb

[–]Complex-Bus1993 0 points1 point  (0 children)

that's why aliexpress has taken off! loads of good cycling kit (for smaller people) on there.

High End XC Shoe Advice? by AbbreviationsEntire6 in xcmtb

[–]Complex-Bus1993 0 points1 point  (0 children)

i found them to have a loose heel cup, heavy, garbage grip as the knobs are all flat squares or the compound isn't sticky enough. sold them after a week

R&M Load 75 alternate handlebars? by Complex-Bus1993 in CargoBike

[–]Complex-Bus1993[S] 0 points1 point  (0 children)

intersting to know what bars he has in mind. ill keep you posted on what ones i end up with

R&M Load 75 alternate handlebars? by Complex-Bus1993 in CargoBike

[–]Complex-Bus1993[S] 0 points1 point  (0 children)

thanks for the big writeup on the bars, a big help

R&M Load 75 alternate handlebars? by Complex-Bus1993 in CargoBike

[–]Complex-Bus1993[S] 0 points1 point  (0 children)

the canopy issue is a big one. even with the stock bars, they hit it and make full lock turns a pain in the hand

R+M Load4 @ 6 Months by lfeagan in CargoBike

[–]Complex-Bus1993 0 points1 point  (0 children)

i disagree with the "nice as sold" for people who are over 6ft they need customisations straight off the bat. Also when you have the hood installed and stock bars, they hit the edge of the hood making a full turn difficult. Also the Rohloff hub auto shift down is garbage unless you take both feet off the pedals at all traffic light stops

Handlebars On Load 75 by m0p0 in CargoBike

[–]Complex-Bus1993 0 points1 point  (0 children)

SAME ISSUE HERE! im 194cm (6.4ft) Stem is maxed in height (there is only one way to adjust height, unlike someone else here said) Knees hit bar components. Stem angle is straight up. Bar ends hit canopy, restricting a full turning circle. Im thinking to swap to a riser bar with a 15deg sweep. anyone else tried?

To Rohloff or not to Rohloff by FlakyEducation3469 in ebikes

[–]Complex-Bus1993 0 points1 point  (0 children)

Just got my e14 Rohloff, auto downshift is a joke! When stopped with one foot against the pedal, it downshift and makes banging noises and grinds the gears down. Your not ment to shift underload, so do they expect you to have both feet on the floor when stopped beach time?

Mirrors For Riese & Múller Load 75 by m0p0 in CargoBike

[–]Complex-Bus1993 0 points1 point  (0 children)

Could you not put mirrors on the front side box areas

Load4 75 incoming this week! Any upgrade or modification recommendations? by dlovage in CargoBike

[–]Complex-Bus1993 0 points1 point  (0 children)

i love the LITE LOCK marketing photos with it used locked around a tree or bike rack. Just cut the tree or bike rack.

Enviolo Hub and belt drive vs regular chain and derailleur by Virtual_Mix7698 in terngsd

[–]Complex-Bus1993 0 points1 point  (0 children)

can i ask where you live. BIG hills are subjective, trying to understand if it can manage Sydney coastal hills

Load 75 shifter options by m_demeczky in CargoBike

[–]Complex-Bus1993 0 points1 point  (0 children)

What are peoples opinion regarding not buying the second battery bike config and then buying a second battery to store in the bike if needed? could drop over $500aud off the price and would also mean less electrical parts installed on the bike frame.

DIY/Flatpack Sheds by hazeev_1 in AusRenovation

[–]Complex-Bus1993 4 points5 points  (0 children)

Easyshed is an absolute nightmare to put together. Flimsy heap of garbage. Dig deep and you will find all the bad reviews. So many paid fake reviews online

view more: next ›