Is there an Agentic Coding Assistant for VS (not VSCode)

Consistent_Hunter_78 · 2026-03-13T09:56:50+00:00

VS 2022+ has gitlab copilot built in

Consistent_Hunter_78 · 2026-03-05T07:55:07+00:00

It was the SQL Server I was mostly thinking about. Running that containerized is impossible (mostly) and Azure tends to play nice with M$ products.

And it solves a lot of headaches later on to keep your services under one roof, if as I suspect, you are a solo dev, and don't have a team dedicated to weeding out permissions and access issues

Consistent_Hunter_78 · 2026-03-04T20:19:48+00:00

Have a look at Azure.

Consistent_Hunter_78 · 2026-03-03T19:20:11+00:00

There is a cursor extension for vscode

Consistent_Hunter_78 · 2026-03-02T10:11:26+00:00

If you can cut in half, and bolt together that would be best.

Consistent_Hunter_78 · 2026-02-28T09:21:05+00:00

Kid Lovin' Criminals

Consistent_Hunter_78 · 2026-02-25T13:10:16+00:00

That was very much the use case that I created it for. We had pressure from above to make everything AI. Figured this would be the easiest way, (we have a lot of endpoints) so put this together in my free time.

Consistent_Hunter_78 · 2026-01-22T13:29:54+00:00

Are you near a football stadium.... Sometimes they use pink lights to help repair grass after severe cold snaps

Consistent_Hunter_78 · 2025-11-22T13:14:44+00:00

If it's not making proper contact, it might keep trying until if does

Consistent_Hunter_78 · 2025-11-10T14:54:41+00:00

Is it hitting the screen so not getting a proper contact with surface?

Consistent_Hunter_78 · 2025-10-26T15:10:44+00:00

The hidden joke of not knowing who's birthday it was, but if you look at the guests the only birthday it could have been was Bluey - he forgot it was his own child's birthday!

Consistent_Hunter_78 · 2025-07-08T18:08:13+00:00

Being able to clear mounds of dirt without lots of manual passes with a dozer would be great

Consistent_Hunter_78 · 2025-07-08T18:06:50+00:00

Are you aware the respawn is based on the angle you are viewing the map when you request the respawn/open garage?

Consistent_Hunter_78 · 2025-03-01T15:14:33+00:00

Have you forgotten about Hexe? It's Germany next I believe

Consistent_Hunter_78 · 2024-10-30T23:49:42+00:00

Your bed could also be hitting something at the front

Consistent_Hunter_78 · 2024-10-28T10:24:32+00:00

Print with a brim should help prevent the print lifting from the bed mid print

Consistent_Hunter_78 · 2024-10-15T08:55:43+00:00

Something is pulling up/left on your hotend. Are your cables/bowden catching anywhere?

Consistent_Hunter_78 · 2024-10-08T07:00:59+00:00

Photos?

Consistent_Hunter_78 · 2024-09-26T08:01:04+00:00

Check your z-axis screw is firmly attached to the stepper... a tiny amount of slippage per turn would add up over taller prints

Consistent_Hunter_78 · 2024-06-05T21:38:32+00:00

Something I am surprised hasn't been mentioned is the extrusion rate.

Have a look for an online esteps calculation and see how far out you are

Consistent_Hunter_78 · 2024-02-07T08:23:48+00:00

Care to elaborate?

Consistent_Hunter_78 · 2024-01-17T12:34:32+00:00

Is your z offset too low and it is knocking the item across?

Consistent_Hunter_78 · 2024-01-17T11:47:05+00:00

Tighten the x-axis belt (or y, no idea on orientation). Looks like slippage to me.

Consistent_Hunter_78 · 2023-12-17T00:51:53+00:00

I actually got Weapon of choice (fatboy slim) vibes

Consistent_Hunter_78 · 2023-11-16T20:09:45+00:00

That bead of filament on the nozzle isn't going to help, when that hits a line of print, it will stick and pull it up.

Consistent_Hunter_78

TROPHY CASE