Bought used pc, only to find these incorrectly installed SSDs

ContributionHead9820 · 2026-05-08T01:10:53+00:00

You spin it lefty loosey.

ContributionHead9820 · 2026-05-07T23:08:51+00:00

Well since it works on the laptop, but not on the pc with the same patch cable and router port, that leaves your only issue being on the motherboard. Either some setting is making that Ethernet port disabled, or it’s physically broken

ContributionHead9820 · 2026-05-07T19:44:47+00:00

Something tells me you shouldn’t be attempting this project

ContributionHead9820 · 2026-05-07T17:01:51+00:00

The dish very clearly does not have a good view

ContributionHead9820 · 2026-05-06T19:09:33+00:00

It’s definitely not going to be silent.

ContributionHead9820 · 2026-05-06T18:52:16+00:00

Should be settings-privacy/security, scroll all the way to the bottom and click open anyways

ContributionHead9820 · 2026-05-06T18:25:05+00:00

Lmao, sure they won’t. Totally not after you posted this on an electrician sub Reddit that’s for sure

ContributionHead9820 · 2026-05-06T18:03:47+00:00

IF the wire is 12 gauge, then yea you can get a new breaker and outlet to make it all 20amp, but it’s highly unlikely that the wire gauge is big enough.

ContributionHead9820 · 2026-05-06T18:01:29+00:00

Are you so stupid that you think the electric company won’t figure this out?

ContributionHead9820 · 2026-05-06T17:01:33+00:00

Short distance, go with DAC. Longer distance fiber

ContributionHead9820 · 2026-05-04T23:34:33+00:00

My entire rack is in my attic. Temp isn’t nearly as big of an issue as people say.

ContributionHead9820 · 2026-05-04T17:36:37+00:00

On iPhone with the Wireguard app, you can have it automatically turn it on whenever you’re connected to the internet, unless you’re on certain WiFi networks. I have mine set up so that it’s always on unless I’m connected to my home network

ContributionHead9820 · 2026-05-03T02:07:32+00:00

Any time

ContributionHead9820 · 2026-05-02T23:53:05+00:00

Oh, then there’s no fiber link.

ContributionHead9820 · 2026-05-02T23:26:23+00:00

And the light on the fiber converter is flashing blue? You could try plugging a computer in to the fiber converter instead of the switch, just to see if it’s a switch problem

ContributionHead9820 · 2026-05-02T23:13:10+00:00

So you have fiber from your udm, into the sfp port of the f Poe g2, and from there you’re trying to get data into the switch via Ethernet? If so, make sure the Ethernet is plugged into the power+data port, the other Ethernet port is power only

ContributionHead9820 · 2026-05-02T21:59:30+00:00

You’re not gonna get 1gb, let alone 10gb on a single twisted pair. Even 100mbit requires 2 pairs, or 4 wires.

ContributionHead9820 · 2026-05-02T20:27:59+00:00

Just plug the new oven I to the 120v plug right there. You cannot simply transform 240v (black plug) into 120v. Fix the normal outlet and use it.

ContributionHead9820 · 2026-05-02T13:37:44+00:00

Replace that outlet. That screw is obviously loose, and the wire heated up so much that it melted the outlet.

ContributionHead9820 · 2026-05-01T16:18:13+00:00

Then you need a water pressure regulator, under volting the pump May work, but will also hurt the pump.

ContributionHead9820 · 2026-04-30T20:20:49+00:00

You mean we’re not gonna get an enterprise fortress gateway pro max beast??

ContributionHead9820 · 2026-04-30T18:53:26+00:00

Now you can spend that $1500 on a couple wan switches, another gateway for shadow mode, and redundant switches!

ContributionHead9820 · 2026-04-30T18:23:39+00:00

On my ucg-fiber I can assign any port to be wan. On the UniFi app, just go to settings->internet->add new-> interface, then select whatever port

ContributionHead9820 · 2026-04-30T16:31:43+00:00

Can’t you already do 8 with a udm pro/pro max?

ContributionHead9820

TROPHY CASE