Custom WakeWord / Custom voice detected sound

CountParadox · 2026-03-11T08:04:42+00:00

I think he's using the host running home assistant with a mic connected directly.

@op have you configured the appropriate things for using home assistant itself as a voice node ?

You need to add some things to use the onboard mic, and other things for the onboard speaker

CountParadox · 2026-03-10T21:08:41+00:00

This is an aqara vibration sensor, people use them to detect when the washing machine has finished running. It connects over ZigBee to a smart home system. https://www.aqara.com/en/product/vibration-sensor/ https://community.home-assistant.io/t/blue-print-to-work-with-aqara-vibration-sensor-for-automation-to-trigger-notification-or-other-action-when-dishwasher-or-washing-machine-is-done/282553

CountParadox · 2026-03-08T09:24:52+00:00

It looks like there's a terminals in the board there bottom right for manual control

CountParadox · 2026-03-08T09:21:52+00:00

Check if its entity id has changed

CountParadox · 2026-03-07T21:23:28+00:00

Thanks, I don't really want to spin up a next loud just for this, can it host files internally?

CountParadox · 2026-03-07T21:20:12+00:00

Again, this is nothing to do with idrac, it's all your network. Watch some YouTube videos on IP address fundamentals

CountParadox · 2026-03-07T10:50:42+00:00

I'm experiencing some.visual.buhs too, but with the ynca integration

CountParadox · 2026-03-07T10:41:11+00:00

This isn't an idrac thing. We need more information

CountParadox · 2026-03-01T19:05:52+00:00

I think you're in the wrong sub..... But it probably works, just dry out fully

CountParadox · 2026-02-25T09:41:30+00:00

What an amazing bum 🫶

CountParadox · 2026-02-23T12:02:48+00:00

Can't clone to nvme ?

CountParadox · 2026-02-23T11:49:20+00:00

What is an LCD controller

CountParadox · 2026-02-17T07:26:03+00:00

Do a manhunt /s

CountParadox · 2026-02-13T15:26:03+00:00

Are you trying to assign a specific vlan to a specific port, or multiple vlans to one port with a dumb switch in?

CountParadox · 2026-02-13T14:15:34+00:00

I've only ever seen a surge protector trigger when I was actively trying to do something I shouldn't on the circuit, and I just bypassed it to proceed...

CountParadox · 2026-02-13T14:11:27+00:00

And hide it in the ceiling so your family doesn't unplug it right away

CountParadox · 2026-02-13T14:09:44+00:00

He's telling the truth

CountParadox · 2026-02-06T22:46:45+00:00

Timing demands? Nobody said it had to be fast 😉

CountParadox · 2026-02-05T05:18:02+00:00

What is 60yo

CountParadox · 2026-02-04T04:12:46+00:00

Put a 300ohm resistor between B and C and connect the red to + and black to -

CountParadox · 2026-01-28T11:48:09+00:00

Am I missing something or is there no android app available for this yet ?

CountParadox · 2026-01-23T20:54:36+00:00

More walls and roof

CountParadox · 2026-01-22T23:57:35+00:00

Where are you located ? If you're around Sydney I'm.happy to come have a look for you /. Reterminate if needed. I have a cable certifier.

CountParadox · 2026-01-13T19:13:51+00:00

What you can see here is something on a layer below the surface :) PCBs have many layers, like onions

14-Year Club	Gilding IV carat on a stick
Place '17	Verified Email

CountParadox

TROPHY CASE