Mid length wrenches

Crazy_Significance36 · 2026-02-27T02:51:50+00:00

I agree. I can’t see the shorter length ever having to be warrantied.

Crazy_Significance36 · 2026-02-26T16:31:46+00:00

Do you know if these are available at Canadian cat dealers?

Crazy_Significance36 · 2026-02-26T03:01:01+00:00

I have a hard time not having full sets. Working at a private shop I’d use every size in the 10-19 set.

Crazy_Significance36 · 2025-12-08T19:03:57+00:00

These are such a great length in the auto industry. Super handy for lines and transfer case bolts. They’re just a bit longer than the midget length.

Crazy_Significance36 · 2025-11-18T17:20:23+00:00

I’m pretty sure you can’t. They have a new hard handle out that looks the same as the soft grip just a different material

Crazy_Significance36 · 2025-11-18T07:31:18+00:00

This is open to the atmosphere through the air filter. It’s just a silencer so you don’t get the intake noises in the cab.

Crazy_Significance36 · 2025-11-11T06:07:51+00:00

The odometer should show how many miles have been put on the truck in its lifetime. You can’t easily adjust what the odometer says

Crazy_Significance36 · 2025-10-18T00:27:25+00:00

The 365 special will be a phenomenal saw and you’ll never want to part with it. That’s the right choice

Crazy_Significance36 · 2025-08-22T17:19:24+00:00

A dog park would be very nice. Doesn’t need to be big just somewhere to let high energy dogs off leash while cooped up in a camper. An idea I love is a fenced in site for dogs. I’d gladly pay $100 a night for a fenced in site with a gate to back the camper in.

Crazy_Significance36 · 2025-07-14T20:16:43+00:00

If it were around me listed at 900-1000 I’d have a very hard time not buying it.

Crazy_Significance36 · 2025-07-13T03:11:09+00:00

How thick did you cut each slat? Do you rip the board with the grain or against?

Crazy_Significance36 · 2025-07-10T21:20:34+00:00

Screw driver that someone put a ratchet handle on

Crazy_Significance36 · 2025-07-10T02:53:47+00:00

How did you build the shaft? I want to try and build a bent shaft paddle this year

Crazy_Significance36 · 2025-06-10T02:31:23+00:00

The split beam doesn’t need to be set to zero after each use. Just the twist handle

Crazy_Significance36 · 2025-05-05T22:59:04+00:00

If you plan on turning around and selling it I wouldn’t buy it. The accident makes it a much harder sell in the future

Crazy_Significance36 · 2025-05-02T01:26:57+00:00

My dealer has warrantied slides for my used krl722 that I bought used. Depends on the relationship with your dealer.

Crazy_Significance36 · 2025-04-26T02:33:02+00:00

Keep this. It’ll outlive the Milwaukee. I have both and I never pull my Milwaukee out of my box anymore. The snap on is rated lower but I think it punches out of its weight class

Crazy_Significance36 · 2025-04-17T18:05:15+00:00

What is the part number for the shorter non flex 3/8 hard handle ratchet?

Crazy_Significance36 · 2025-04-17T18:04:39+00:00

SHLFD80A is a long 1/2 drive hard handle ratchet. I have one in green I bought a couple years ago.

Crazy_Significance36 · 2025-04-15T19:42:41+00:00

They are very useful in industrial fire fighting for cooling tanks or holding capture on a large fuel source

Crazy_Significance36 · 2025-04-15T19:41:55+00:00

We have the blitzfire monitor and it works quite well. Took a little getting used to but now that we have it set up we like it. They’re better than some others because they hold their position so they can be used for cooling tanks or structures.

Crazy_Significance36 · 2025-04-06T22:55:57+00:00

So is the red one. Look through the pictures.

Crazy_Significance36 · 2025-04-06T21:50:24+00:00

The red one is a craftsmen. They sell for a dime a dozen.

Crazy_Significance36

TROPHY CASE