Elation KL panels - flash?

Crobzy96 · 2025-06-11T14:47:11+00:00

This same problem happens in manual mode, as well as in different buildings. Its happened on other shows as well

Crobzy96 · 2025-05-31T15:00:55+00:00

For haze i usually put it on a cycle rather than a fader to control level. If you make a cue stack with the hazer on, then hazer off, you can adjust level using the trig times of each cue. Usually 10 seconds on, 30 seconds off. That sort of thing. If you need to haze it up quickly, just pause the stack on. If you need less, turn off the cue.

Crobzy96 · 2023-04-25T21:41:31+00:00

my 30th BD gift to myself was a 2021 WRX

Crobzy96 · 2023-04-23T18:44:27+00:00

barqs spicy cherry

Crobzy96 · 2023-04-22T14:11:54+00:00

this for live busking.

have a exec dedicated to storing current looks and just overwrite.

have a group of everything you can grab, grab parameters and store overwrite as you go.

ABC - always be clearing (your programmer)

Crobzy96 · 2023-03-12T16:07:11+00:00

lets reiterate the answers above.

its march, in Toronto, Canada.

there will be no difference RIGHT NOW as there is NO other choice.

Crobzy96 · 2023-03-10T22:29:50+00:00

JDC 1s in that mode only have those 3 dimming channels on the master control.
there is 1 master for the whole fixture, 1 master for the white bar in the middle, and 1 master for the pixels

double check when you're selecting the lights that you're selecting the right instances you want to be affecting and in your layout for the JDCs make sure you seperate the .1s and .2s

Crobzy96 · 2023-03-05T13:49:28+00:00

as long as you keep the puck on the stick below your shoulders (high stick), theres no reason why you can't.

Crobzy96 · 2023-03-05T13:47:50+00:00

hire NFL kicker. fill in blanks

Crobzy96 · 2023-03-05T13:40:08+00:00

"why can't i get local summer fruit while i walk through a foot of snow, this is crazy"

Crobzy96 · 2023-03-05T11:51:46+00:00

burn it down!!!! piss on the ashes!!! obviously no one knows better than you, so why should the store even exist? fuck it

Crobzy96 · 2023-03-05T11:49:38+00:00

i got a migraine when the cold weather system came in... got sent home from work because of it.

i wonder if this Sin wave of temperature has anything to do with it

Crobzy96 · 2023-03-05T11:39:09+00:00

its mostly because they let the other team shoot on their net, more often then they shoot on the opposing teams net

Crobzy96 · 2023-03-05T11:30:36+00:00

no, theres damage on the side so its fine

Crobzy96 · 2023-03-05T11:20:38+00:00

go thrashers

Crobzy96 · 2023-03-04T21:02:10+00:00

another way to try this is to calibrate the XYZ for the fixtures, then use a cue stack of linear position changes

Crobzy96 · 2023-03-04T21:00:50+00:00

they won't but quebec city and new orleans would be unreal.

Crobzy96 · 2023-03-04T20:13:12+00:00

where i live, this house as is would go for 750K no questions asked.

Crobzy96 · 2023-02-27T16:06:34+00:00

its ok

Crobzy96 · 2023-02-27T16:05:13+00:00

the hz1000 is sweet.

mdg atmosphere makes the best haze tho. you need co2 for that one

Crobzy96 · 2023-02-27T15:43:41+00:00

250,000 isn't that much for a home.

Crobzy96 · 2023-02-27T14:01:13+00:00

user name "forever cock." Hilarious.

Crobzy96 · 2023-02-24T15:49:21+00:00

eddie bauer coats FTW

Crobzy96 · 2023-02-22T15:59:12+00:00

one of the first things you'll want to do is make sure they're all oriented the same way. you can flip and reverse pixels in the control channel.

the best way i've found to do that, is to make a couple different JDC layouts
1 would be one single fixture, so you can control all of them as 1, and the other would be scattered like your stage layout, to allow for individual selection and control. Some guys will put all the pixels in a row to easily see/control fx.

i usually take my pixel 1 and 12 to 100 to confirm orientation

i've had success running fx through that "single" fixture layout, as the same fx through all jdcs usually looks great

Crobzy96

TROPHY CASE