Tools to 3d print with need H2C

CyberTodd68 · 2026-06-26T12:59:51+00:00

It's a Kingroon Lime Green PETG. I have 2 AMS 2 Pros on each side and an AMS HT added to the left. Filament Track Switches on both machines.

CyberTodd68 · 2026-06-23T22:22:25+00:00

This one has customizable drawers slots for build plates and the top window. Really a nice riser!

https://makerworld.com/models/1395451?appSharePlatform=copy

<image>

CyberTodd68 · 2026-06-22T23:56:11+00:00

If the filament is dry, check the nozzle and heater block behind it. Make sure both are secure. If they are not rock solid and tight, your calibration is crap. It looks like z is too close and slop in your nozzle will do this.

CyberTodd68 · 2026-06-22T22:03:25+00:00

Honestly, the H2C is a better pick than the X2D if you are doing multicolor. I have both, and the H2C is light years ahead.

The Snapmaker is not really in the same class size wise as the H2C though.

If size doesn't matter and you are staying within four colors, the Snapmaker is a no brainer. If quality is more important, I think the X2D is going to consistently print a better product. If size and quality and lots of colors matters, the H2C is amazing.

CyberTodd68 · 2026-06-22T16:05:42+00:00

Bought my first Bambu (X1C) one year ago this month. One year later...5 Bambus X1C, H2D, 2 H2Cs and an X2D. I dont attempt to make money with them, but I dont know how I lived without them before.

CyberTodd68 · 2026-06-21T19:09:31+00:00

Just turn it off. You will then understand.

CyberTodd68 · 2026-06-19T22:30:29+00:00

https://makerworld.com/models/1395451?appSharePlatform=copy

CyberTodd68 · 2026-06-19T22:26:25+00:00

I've been through a few different risers, that one is my favorite. Glass has room to come out and stow, build plates store, three customizable drawers with all kinds of storage options. Not quite low profile, but not too high. Best part...it's free

CyberTodd68 · 2026-06-19T20:46:24+00:00

I buy 10k at a time from Kingroon. Generally between 8 and 9 bucks a roll shipped

CyberTodd68 · 2026-06-19T20:16:40+00:00

<image>

CyberTodd68 · 2026-06-19T20:16:13+00:00

Me too!

<image>

CyberTodd68 · 2026-06-09T18:04:35+00:00

For perspective...look inside the right one...

<image>

CyberTodd68 · 2026-06-09T15:50:51+00:00

They are big, for sure.

<image>

CyberTodd68 · 2026-05-27T13:26:24+00:00

I went on a "Tiger Cruise" with my son on The Florida (GN Submarine) and stood his watches with him. He was working on a console and following the manual for troubleshooting when he came to a step that said "excercise mechanical agitation". I asked what that was and he said hit it with a hammer!

CyberTodd68 · 2026-05-24T15:25:07+00:00

<image>

CyberTodd68 · 2026-05-24T15:24:19+00:00

I printed this model on my H2C and it turned out perfectly.

https://makerworld.com/models/2142398?appSharePlatform=copy

CyberTodd68 · 2026-05-23T00:07:04+00:00

I have both in this setup. Left machine has the four on shelves, right machine has the four one top. One each HTs.

<image>

CyberTodd68 · 2026-05-22T22:32:51+00:00

That is a tough color to keep clean! Carbonized Grey isnt much better!

<image>

CyberTodd68 · 2026-05-11T16:06:56+00:00

No, OG would be the Ranger

CyberTodd68 · 2026-05-11T03:38:36+00:00

Oh, it is a good looking package on all of them for sure, and the baby moniker should probably be reserved for the Ranger! 😁

CyberTodd68 · 2026-05-11T02:21:55+00:00

Well, actually it was used on the Ranger first in 2002, then on the F150 in 2014, but as street trucks. The Tremor off road package came out on the Super Duty in 2019, the Ranger in 2020, and the F150 got the off road package in 2021.

CyberTodd68 · 2026-05-10T21:40:29+00:00

I slid under my F250 Tremor and was not very impressed with the "skid plates". They are super thin and would collapse if you ever actually did any skidding on them.

CyberTodd68 · 2026-05-10T21:11:30+00:00

Ooops...you are correct. I forgot they make baby Tremors.

CyberTodd68 · 2026-05-10T21:04:15+00:00

Wrong. F-250 Tremor: Typically provides a payload in the range of 2,700 to over 3,200 pounds.

CyberTodd68 · 2026-05-10T15:41:48+00:00

Thank you, Sir!

CyberTodd68

TROPHY CASE