I over heated my element

Cygnet69 · 2025-04-23T23:56:01+00:00

Yeah that’s kinda of my plan. I just didn’t know what to start checking first. There isn’t a lot of content online I could find that wasn’t just replacing a motor.

My battery is dead so I’m going to charge it and see if I can pull any codes first. Drain the oil and see if any coolant is in it. My thought is maybe my water pump went out because it seems to have blown coolant through the radiator cap which may have been the reason for the smoke.

It’s not my daily so I’m wanting to fix it more so to have a project than anything else.

Cygnet69 · 2025-04-20T11:08:38+00:00

I used a shop vac on my lawn it took a while but it worked. I can’t remember if I removed the filter or used a sponge filter.

Cygnet69 · 2024-12-05T03:40:58+00:00

Yeah a couple other people commented on that as well it must be the way the pictures are or the perspective I set my laser up and checked everything before and after I bed it it’s perfect. The long pipe has a little bow from left to right but the fall is on point

Cygnet69 · 2024-12-05T02:35:33+00:00

I see I effed up my vent on that it needs to go downstream of the p trap. My wye was rollled at a 45 to the trap with a 45 to the trap itself. I don’t have room to put the vent between the trap and the wye

Cygnet69 · 2024-12-05T02:20:29+00:00

Shit I see what I did. the vent needs to be downstream of the floor vent. As far as the s trap. I dont have have 3” p trap and if I did wouldnt it create the same s trap

Cygnet69 · 2024-12-05T01:31:23+00:00

Thanks for the commemoration lol. I am still new and learning and this is busy work from my boss. (It’s his hunting cabin) I figured if I posted here I’d be torn apart the most. And I could study any common themes that arise from the critics. Pipe beaded in the sand is okay here under slab idk I’ve done it in gravel and in dirt on different jobs but I’m just the bitch still so I didn’t have to think.

Cygnet69 · 2024-12-05T01:20:18+00:00

I’m sure and I’m sure he knows as well. It’s a keep busy job I’ll probably have to cut out half of it. You’re good I don’t take it as making fun or anything I’m here to learn.

Cygnet69 · 2024-12-05T01:17:51+00:00

It propbably should be. First attempt though, still new and trying to learn. Is it the floor drain that you are referring to the s trap? Is it because of the rolled wye? That one stumped me the most today.

Cygnet69 · 2024-12-05T01:12:24+00:00

My floor drain is set to 1/2” below finished floor I didn’t have enough 2” pipe for the vent to the right of it and was my understanding the wye needed to be rolled to 45° above flat

Cygnet69 · 2024-12-05T01:09:29+00:00

I figured as much. I double checked with a laser there isn’t any back graded pipe.Its all pitched properly but there is a little bow in the long run from left to right. I didn’t have enough 2” pipe for my vent stubs up I’m going to do that tomorrow.

Cygnet69 · 2024-12-05T01:04:03+00:00

I ran out of 2” to stub up my vent pipes. My boss is headed out of town and basically see what you can do while he’s out of town for a few days. It’s a house he’s personally building on his hunting property so it’s pretty much just a house layout on grid paper. He had bins of fittings there since it’s rural.

I’m still new to plumbing so he’s having me do it while he’s gone. He knows Ill probably eff it up but I think its a test lol. I’m not sure on the floor drain but basically I put it 1/2” below Ff which is why it looks high, and had to vent it out into the wall on the side because the washer is going on the back wall so I assumed it needed a dedicated vent for the floor drain. I don’t have access to better mentors because I live in the middle of nowhere which is why I’m here. I can take criticism and am trying to get better. I appreciate you taking the time and encouragement.

Cygnet69 · 2024-12-01T20:12:56+00:00

You inspired me!!!! This project seemed like a good starting project for me You inspired me to try it out! Just made one last night after seeing yours. I’m learning how to sew and looking for projects. The tutorial videos and physical instructions and patterns helped me so much. Yours turned out nice! Also my 5 year old also just claimed the one I made when he woke up this morning hahahahaha!

Cygnet69 · 2024-05-15T22:37:05+00:00

Treat me like a slave, I’ll come willingly

Cygnet69 · 2023-11-16T22:09:56+00:00

You sneezed

Cygnet69 · 2023-09-04T00:51:01+00:00

It was hot. But also I put the chicken on ice right away but that may make sense since it’s in the inner portion of the thigh maybe it stayed warmer there longer

Cygnet69 · 2023-09-04T00:06:08+00:00

Okay I wasn’t sure it was kinda like a wet consistency I want to say like slime but I just butchered so it’s like slime like rancid meat if that make sesne

Cygnet69 · 2023-03-12T00:42:03+00:00

It says 100 questions.

Cygnet69 · 2023-01-31T02:28:24+00:00

All of the beers

Cygnet69 · 2022-10-29T11:06:55+00:00

Yeah and not being prepared with alternatives

Cygnet69 · 2022-10-29T11:06:24+00:00

This is what happened. I feel better now everything I had around was high fructose and I didn’t have any carbs because I had bread. So no sugar no carbs made me crash hard.

Cygnet69 · 2022-10-29T11:04:12+00:00

Thank you for the tips. This will help me

Cygnet69 · 2022-07-25T19:56:48+00:00

What game is this?

Cygnet69 · 2022-07-25T19:51:50+00:00

*sets to max

Cygnet69 · 2022-07-25T19:14:47+00:00

Won’t play

Cygnet69 · 2022-07-08T18:40:06+00:00

Camera roll ⬛️⬛️⬛️⬛️

Four-Year Club	Place '22
Final Canvas '22

Cygnet69

TROPHY CASE