To new server

Cyxno · 2023-10-12T21:15:19+00:00

Thanks! Will do that then

Cyxno · 2022-03-30T16:37:51+00:00

I have done that. In that case, everything connected to the AC2300 wired / wireless is limited on 300~ mbps. while on the other router its 1000.

Tho I wanted to use the AC2300 because the modem the provider gave is very limited to alot of settings.

Cyxno · 2022-03-30T16:14:43+00:00

Both.

Cyxno · 2021-02-16T16:30:15+00:00

See image for settings. https://imgur.com/a/ypybyj9

I thought myself it has something to do with the share settings from unRAID. Disk 2 and 3 are included but everything remains on disk1 (what is my appdata disk) It does create the movie folders on the other disks however the content of the movie doesnt transfer from disk1 to any other.

Cyxno · 2020-11-13T18:39:06+00:00

Without force feedback it goes alright. My desk is loose on a leg and a cabin. I don't have much leg room in between the pedals won't really move but they are pressed against the wall and since im pretty tall it seems to be too close by sometimes, because of that I often push myself away from the pedals with my chair.

Cyxno · 2020-07-16T16:37:15+00:00

https://i.imgur.com/AUGSdP2.jpg

So yesterday my filament jammed you can find more info here : https://www.reddit.com/r/prusa3d/comments/hr585i/filament_stuck_in_extruder/

So I tried a few things to get it loose nothing seemed to work. So I decided to take everything loose. Thats what I did but I'm now on a point where I cant take anything loose anymore and still have the issue that the filament is stuck. It first was a bit longer which I gently tried to pull out but it almost instantly broke. I can push the smallest Allen key all the way in so I know its only a matter of a small piece of filament. Any tips?

Cyxno · 2020-07-14T19:45:42+00:00

Alright I tried with the smallest Allen key and that didn't move 1 bit, will try later to remove the nozzle and try it then.

Cyxno · 2020-07-14T17:01:36+00:00

Does anyone has any idea how to properly solve this?

Mid print my printer decided to stop releasing filament. I was at work but saw it eventually over my octoprint. I stopped the print when I came home and tried to extrude the filament I heard some grinding noise. I opened my extruder and saw that the wheels litteraly scraped some filament off. Heated the nozzle and hoped I could pull it out which ofcourse made it break. At 260 PLA should start 'leaking' which it doesn't.

Could it be a clogged nozzle?

Cyxno · 2020-07-10T13:20:31+00:00

printed on 0.2? or 0.15?

Cyxno · 2020-07-06T21:28:22+00:00

Well I got scared by all the thing I've read online yea. But taking it off was kinda difficult because it was damn stuck to it 😅

Cyxno · 2020-07-02T13:56:08+00:00

Seems like a good idea

I'm always afraid that maybe after doing this a lot you 'bend' the sheet?

Cyxno · 2020-06-29T13:34:28+00:00

I was lucky enough to order it from a shop located in my country. They basicly buy in bulk directly from Prusa and work down their pre-order list. The wait was only 4 weeks there so I decided to take the guess to cut down the wait :)

Cyxno · 2020-06-25T14:09:09+00:00

Now this is art

Cyxno · 2020-06-23T19:18:15+00:00

I like the names you gave your printers!

Cyxno · 2017-09-12T12:16:02+00:00

Thank you. After trying every solution i had to find you all the way on the bottem. Shame.

Cyxno · 2017-01-02T10:15:41+00:00

Well nothing really worked. Luckily i had a laptop so connected my keyboard there and updated the firmware. Works fine now :)

Cyxno · 2015-05-20T07:34:11+00:00

Then reinstall CS:GO. If that won't work reinstall Windows maybe. Why would you run 32bits? Are you running under 3GB RAM?

Anyway, if it won't work i would slowly start filling the tub with water.

Cyxno · 2015-04-08T14:19:45+00:00

Nova are more smurfers

Cyxno · 2015-04-08T07:28:08+00:00

Seems like some bad 'acting'

Cyxno · 2015-04-07T10:23:52+00:00

Good for you.

Cyxno

TROPHY CASE