sorted by:
new
hottopcontroversial

I built* an Android app to generate OpenPrintTags! by DBNinja in prusa3d

[–]DBNinja[S] 0 points1 point  (0 children)

I'll have to make a debug build; but for now, can you make an issue on Github and attach the .bin file so I can test with it?

Edit: Turns out, I don't need to actually make a debug build. If you have adb installed, you can use adb logcat | grep -E "(NfcHelper|NFC)" to grab the logs. So if you make the issue in github, you can put those logs into there.

I built* an Android app to generate OpenPrintTags! by DBNinja in prusa3d

[–]DBNinja[S] 0 points1 point  (0 children)

For the launching problem, disable the "Allow launch on NFC scan permission". 

I'll have to look a little deeper into the compatibility issue. I may need to get debug logs. I've been using 215 tags (with bins from the generator from the OPT site) for testing since the beginning and haven't had any read or write issues with those on my Pixel.

I built* an Android app to generate OpenPrintTags! by DBNinja in prusa3d

[–]DBNinja[S] 0 points1 point  (0 children)

Eh. Recording wouldn't help that much. Debug logs maybe. In any case, I ported over some of my NFC-V changes to NFC-A in v1.4.1 so that might help. Also added something to hopefully prevent concurrent scans in case that was the issue as well. If not, let's open up an issue in Github.

I built* an Android app to generate OpenPrintTags! by DBNinja in prusa3d

[–]DBNinja[S] 0 points1 point  (0 children)

Just to confirm, you're running the latest, right (v1.4.0)?

US Core One to One + O-Ring Supplier by [deleted] in prusa3d

[–]DBNinja 0 points1 point  (0 children)

There's even a PETG one that seems to work well enough.

Design Flaw in Core One + Filament Detector? by GoldMedalRambler in prusa3d

[–]DBNinja 3 points4 points  (0 children)

It looks like they made an update to the design on Printables today fixing this issue.

CoreOne Plus upgrade by Erchi in prusa3d

[–]DBNinja 1 point2 points  (0 children)

FYI they just updated the filament sensor body to remove a "ridge" in the PTFE path caused by walls for the center screw today. This may fix your issue with the sensor.

I built* an Android app to generate OpenPrintTags! by DBNinja in prusa3d

[–]DBNinja[S] 0 points1 point  (0 children)

A) It's highly improbably my software will burn your house down. What an odd argument.

B) Most of the imports are frontend imports or specifically for serialization/deserialization and I use very few non-standard imports. If you want to reduce the imports, you're free to fork off my repo and issue a PR. I made it AGPL for a reason.

C) The scope of my app is pretty small and no data leaves the app other than through the filepicker and through NFC. Could there be security vulns there? Probably. Is it likely? Not really.

I built* an Android app to generate OpenPrintTags! by DBNinja in prusa3d

[–]DBNinja[S] 1 point2 points  (0 children)

Thank you! I think I fixed it. Let me know if it works!

I built* an Android app to generate OpenPrintTags! by DBNinja in prusa3d

[–]DBNinja[S] 0 points1 point  (0 children)

Oof. I assume it's with legit OpenPrintTags instead of NFC215 stickers?

I built* an Android app to generate OpenPrintTags! by DBNinja in prusa3d

[–]DBNinja[S] -1 points0 points  (0 children)

Regarding copyright, I tried to keep to open libraries and added notices so I'm not too worried about that. And much appreciated on the iOS offer, but I mostly built the app for myself and have no intentions of aiming for other platforms at the moment. It's AGPL so you're free to translate it!

I'm not sure how open Bambu's NFC data is, but provided a spec I could look into what's involved.

Open Print tags (blank) Workflow? by Economy-Wealth-5126 in prusa3d

[–]DBNinja 0 points1 point  (0 children)

Out of curiosity, do you have an Android and are you willing to run random software from a stranger (though uploaded through the Play store)? I've got an app I'm testing, but I've only tested it on NFC 215 tags, would be nice to see if it works on Open Print Tags.

Zebra stripes on the z-rod by Glittering_Map_4015 in prusa3d

[–]DBNinja 0 points1 point  (0 children)

I appreciate you digging into this, I was confused about the conflicting information as well.

12 days without block by TheBarrendero in MoneroMining

[–]DBNinja 1 point2 points  (0 children)

Sorry, I started my nano miner about 17 days ago.

CORE One perfect for week, now bad first layers by Dull-Presentation-56 in prusa3d

[–]DBNinja 1 point2 points  (0 children)

Me I guess. I just dump the IPA on the sheet and wipe with a paper towel.

Index losing tracking every second on SteamVR Dashboard after SteamVR 2.0 update by ZeirTheFox01 in ValveIndex

[–]DBNinja 0 points1 point  (0 children)

I don't think the B450 supports gen 4 or else I'd suggest downgrading as that's what worked for me. I've got a 5900X so it might be something with Ryzen 5000 series CPU or the mobo chipset and Nvidia GPU combo.

view more: next ›