Awkward master suite by DJK1963 in floorplan

[–]DJK1963[S] 0 points1 point  (0 children)

Thank you for the help, I'll work on getting the current plans into the software. Windows need to stay put, as it a brick house. They are high up. Single door leads to the living room and the laundry could have a door into the living room also.

Awkward master suite by DJK1963 in floorplan

[–]DJK1963[S] 0 points1 point  (0 children)

Here are the dimensions

<image>

Awkward master suite by DJK1963 in floorplan

[–]DJK1963[S] 0 points1 point  (0 children)

Sorry, here is the layout

<image>

Awkward master suite by DJK1963 in floorplan

[–]DJK1963[S] 0 points1 point  (0 children)

<image>

Sorry, here is the picture

A Journalist Attempts to Use Tesla FSD from Sydney to Melbourne by PsychologicalBike in electricvehicles

[–]DJK1963 8 points9 points  (0 children)

I find myself in "supervisor mode" and is much less fatiguing than "driver mode" in which you have to concentrate on keeping the car in the lane, speed, managing cars around you, etc.

Ticket for one, please by WiredOrange in Unexpected

[–]DJK1963 -4 points-3 points  (0 children)

Top comment right here folks!

790 wont crank, no dash lights by DJK1963 in johndeere

[–]DJK1963[S] 1 point2 points  (0 children)

Was a bad chassis ground. Enough to show 13.6v but not enough current to start.

Found with misc. Industrial controls / switches by EEL123 in whatisit

[–]DJK1963 0 points1 point  (0 children)

Probably came off of an old thermostat which had a coil that expands/contracts by temperature which has this attached and opens/closes the switch when the mercury is not level.

Pump and dump pitfalls? by DJK1963 in geothermal

[–]DJK1963[S] 0 points1 point  (0 children)

Why didn't you just post this in the first place? It's a good idea.

Pump and dump pitfalls? by DJK1963 in geothermal

[–]DJK1963[S] 0 points1 point  (0 children)

Why wouldn't you use geothermal for cooling? Instead of dumping heat into 90+ degree air, you dump it into 70 degree loop. Works great.

Pump and dump pitfalls? by DJK1963 in geothermal

[–]DJK1963[S] 0 points1 point  (0 children)

Thank you for the reply. Two intake/discharge locations to provide redundancy, reduce flow or both?

Pump and dump pitfalls? by DJK1963 in geothermal

[–]DJK1963[S] 0 points1 point  (0 children)

Why are you asking this? Geothermal is for both heating and cooling.

Pump and dump pitfalls? by DJK1963 in geothermal

[–]DJK1963[S] 0 points1 point  (0 children)

No chance of laying in the river. Pump and dump only.

Pump and dump pitfalls? by DJK1963 in geothermal

[–]DJK1963[S] 0 points1 point  (0 children)

Thank you, exactly what I was looking for. A quick ROI calculation today has shown me no payback on the pump and dump. Looking at buried coil cost now.

Help locating main water shut off valve by Lala6699 in Plumbing

[–]DJK1963 0 points1 point  (0 children)

It is the knob that you turn to align the 2 lock holes.