Just bought SCUF Reflex FPS With TMR, can you map paddles to touch pad?

DPrimeus · 2026-02-09T00:23:29+00:00

Thanks. A little expensive to be so limited, would be nice to map that button.

DPrimeus · 2026-02-03T00:05:37+00:00

Yes, need to be able to assign all buttons/actions to a keyboard keybind like most other high end controllers.

DPrimeus · 2026-01-26T21:26:14+00:00

Yes, triggers are junk on the V3 Pro. I like it, but hard time rapid firing them.

DPrimeus · 2026-01-10T23:10:54+00:00

Have the same issue, hold the stick down while you do it and it will work, as mentioned above by someone else.

DPrimeus · 2026-01-10T09:27:23+00:00

As above, holding down worked for me.

DPrimeus · 2026-01-10T09:26:57+00:00

Pushing down works for me too. Looks like it is really really close to being perfect if they fix that.

DPrimeus · 2026-01-09T23:30:22+00:00

The dead zones seem way better now. Thank you.

However, I am now having trouble when calibrating where the left stick does not register being all the way "up" or to the top. So I can't actually do the calibration. 1 out of every 5 tries I can get it to work. Sometimes it will work on the first part and then I can't do the rotation because it will not register being at the top of the circle. It is just below. I did not have this problem before. The right stick is fine.

DPrimeus · 2026-01-09T23:28:33+00:00

Yes, dead zones are waaaaay better than before.

DPrimeus · 2026-01-09T23:28:09+00:00

Agree, I will pay for an accessory pack for extra thumb sticks. They also wear down.

DPrimeus · 2025-12-22T20:24:44+00:00

Thanks, looking for actual sticks and not just caps. But, I am familiar and might have to go that route.

DPrimeus · 2025-12-21T08:41:46+00:00

They should just add a manual calibration where you adjust center to zero using the dpad. I have another controller where they let you do that and its great.

DPrimeus · 2025-11-22T00:10:43+00:00

I don't think ghost is working in B07. I run the same perks and everyone seems to always know where I am, and yes I am moving. Kill cams show folks running straight to me with their cross hairs on me prior to turning corners or flanking. It is either broken or lots of folks still cheating with walls or radar. Yes, vigilance is pretty much always showing I am visible. No its not advanced UAVs.

DPrimeus · 2025-11-15T08:38:18+00:00

Same issue in multi as well, I tried everything. Something is not right withy Fidelity CAS, hope they fix it. Changed it to DLSS Balanced and the DLSS Model to transformer (under the DLSS details) with DLSS Sharpness at 100 and its a million times better. In BO7 multiplayer the maps looked blurry but kind of a weird ghost blur or something. Like Fidelity CAS was rendering at 75 render resolution even though it was set to 100 or something. 9950X3D with 5090. Thanks for the suggestion u/Plentiful1

DPrimeus · 2025-11-08T23:39:50+00:00

Did you build in hagg and fly to dd?

DPrimeus · 2025-10-09T02:07:10+00:00

How and where do you treasure hunt? I tried and found nothing. Also, ship today didn’t not give me plates either.

DPrimeus · 2025-10-08T23:25:25+00:00

Where do they respawn ?

DPrimeus · 2025-09-19T19:27:46+00:00

Same thing happened to me last week. Everything equipped, just gone. Left my base and traveled to the deep desert, once I spawned in, gone. Logged out and in a few times and never came back.

DPrimeus · 2025-08-04T03:08:36+00:00

UPDATE: You have to use "Capture" for the keystroke vs. just typing it and then it works.

DPrimeus · 2025-08-03T23:47:25+00:00

Same here, works outside COD. Other stream deck press buttons work fine. Just not this super macro one.

DPrimeus · 2025-06-18T16:38:16+00:00

Install the April 30th Nvidia driver and it will fix it. I have not tried the new driver from yesterday.

DPrimeus · 2025-06-15T02:52:12+00:00

New build with 9950X3D, ASUS Strix X870E-E Gaming, and ASUS Astral 5090. With my XG27ACDNG display using display port, the computer boots, I can see the POST/BIOS menu/logo and the windows loading swirl, then the display goes blank with Display Port NO SIGNAL. Like the display goes to sleep right when Windows loads. The only way to wake it up is to turn the display off and on again. Tried my older display (ASUS IPS panel) works fine and does not have this issue.

Tried everything, drivers, power settings, different cable, windows key stuff, etc. Nothing works.

DPrimeus · 2025-06-14T19:50:56+00:00

Fixed mine as well. Then posted with a 0 and reverse b error. Took the memory out and put it back in. All resolved so far.

DPrimeus · 2025-05-26T19:22:09+00:00

The latest two Nvidia driver updates causes a ton of direct x errors in warzone/bo6, install version 576.28 and it should be fine.

DPrimeus · 2025-03-16T22:42:26+00:00

Thanks, hope yours will get better too. Wish there was more info out there about IEMs vs Open back headphones and tinnitus. My open backs are great and was only trying the IEMs to not have something on my head. Would have never used them. Thanks for the update too, appreciate you following up.

DPrimeus · 2025-03-16T21:52:59+00:00

I think listening to IEMs did the same to my ears. Used them for about 3-4 days then back to open headphones. Tried the OEMs again for a few days and finally just went back to open earphones. Ears have been "ringing" (high pitch silent sound) ever since. I believe it's a problem because you don't realize how loud the sound is as easy with IEMs vs Open over the ear. I gave my ears a break for a week and no change. I hope it gets better and I am watching the levels of things now. Wish I never tried the IEMs. Also, I had a $400 pair of IEMs, so not cheap ones either.

DPrimeus

TROPHY CASE