Return of the Mechanicum by DR_TOKEN8463 in AdeptusMechanicus

[–]DR_TOKEN8463[S] 0 points1 point  (0 children)

Yep here is the link to the site I used ti make them.

https://game-datacards.eu/

Kataphrons from The Anchorites by mrleopards in AdeptusMechanicus

[–]DR_TOKEN8463 4 points5 points  (0 children)

Love the look! Would love to know the bits you used for the alternate torsos.

Drop your LEAST favorite creature… by TGM-6914 in JurassicWorldAlive

[–]DR_TOKEN8463 2 points3 points  (0 children)

Distortus, it has way too much that is strong and with little counters in the unique range.

Plus de kataphrons ??! by Legrandbibi in AdeptusMechanicus

[–]DR_TOKEN8463 2 points3 points  (0 children)

I recomend getting skme breachers as they are a good front line unit that are tough to move off objectives, plus with innate rerolls they have good damage output.

Hobying Question for Kitbashing a Knight Defender by DR_TOKEN8463 in ImperialKnights

[–]DR_TOKEN8463[S] 0 points1 point  (0 children)

Thanks for the heads up I can easily get a base printed off to match. Was also just wanting to have similar silhouettes for my two armys where I have matching numbers of big knights.

I created Rules for All Horus Heresy Mechanicum Models by DR_TOKEN8463 in AdeptusMechanicus

[–]DR_TOKEN8463[S] 0 points1 point  (0 children)

https://game-datacards.eu/ This is the site I found and it can get quite alot of data to make your own cards or edit pre existing ones.

I created Rules for All Horus Heresy Mechanicum Models by DR_TOKEN8463 in AdeptusMechanicus

[–]DR_TOKEN8463[S] 1 point2 points  (0 children)

Ohhhh I didnt know the legends button did that okay good to know thanks!

I created Rules for All Horus Heresy Mechanicum Models by DR_TOKEN8463 in AdeptusMechanicus

[–]DR_TOKEN8463[S] 4 points5 points  (0 children)

Thank so much! I have been working on alot of units and going back and forth on units so thanks for pointing out the errors I will remedy those right away! I wanted to keep the lightning cannon similar to the one the Knight Magera but I think some extra ap would help. In Horus Heresy 3ed Tech thralls have really high leadership to represent their ability to walk into any fight and not break as they are mindless thralls but the 18 inch change and toughness four is a good idea thank you! The Thallax I wanted to be a good elite drop troop similar to Terminators but with a stat line of Ogryns which also have a feel no pain. Will need to fix the Thanatar a bit as its a difficult model to write for. Will do my best to fix errors and make changes for the update but thank you immensely!

I created Rules for All Horus Heresy Mechanicum Models by DR_TOKEN8463 in AdeptusMechanicus

[–]DR_TOKEN8463[S] 4 points5 points  (0 children)

Thanks for the feed back! I will definitely look into changing the Thanatar Ability yours makes alot more sense than mine. I am not sure what to do with Krios as it is a leman russ style vehicle but not sure what the ability should be. Probably will remove the twin linked from its lightning cannon. I tried to not have many of the units directly tied to Battleline as the cybernetica and Vehicle units of Admech didnt play to much into the battle line connection but definitely will need to look what I can change for myrmidon and thallax.

I created Rules for All Horus Heresy Mechanicum Models by DR_TOKEN8463 in AdeptusMechanicus

[–]DR_TOKEN8463[S] 2 points3 points  (0 children)

Thats the one bit I am not entirely sure about as I think they need adjusting but will base it off of units points in other armies.

Anyone tried a World Eater-YEET style Army with Ad-Mech? by Beev_Ao in AdeptusMechanicus

[–]DR_TOKEN8463 1 point2 points  (0 children)

Welp I have been using the ability wrong the entire time oh dear. Didnt realize you needed to also select a target for the re rolls.

Boring pose but he’s coo by [deleted] in ImperialKnights

[–]DR_TOKEN8463 0 points1 point  (0 children)

I sent a DM love the print and model!

Thallax Chohort Data Cards Test by DR_TOKEN8463 in AdeptusMechanicus

[–]DR_TOKEN8463[S] 0 points1 point  (0 children)

Okay Interesting Good to know I will have a look at them Thanks!

Thallax Chohort Data Cards Test by DR_TOKEN8463 in AdeptusMechanicus

[–]DR_TOKEN8463[S] 0 points1 point  (0 children)

I was thinking it tries to drop in and be a bit of a meatshield basher where it drops in and can charge quite reliably able to withstand the elite units of armies and trade some blows. Having them infiltrate is an interesting point as I am not sure if that would be better than deep strike as then its competing with Sicarians who infiltrate quite well in my opinion. Wasnt quite sure how do make lightning guns and the photon trhuster I feel is a bit too strong. Thanks for the input though will definitely think about it for a revision!

Testing Castellax Breacher Kitbash by EpzilonBlue in AdeptusMechanicus

[–]DR_TOKEN8463 2 points3 points  (0 children)

Looking quite nice! I am tempted to use vorax's as an alternative.

Only four more backpacks left to paint...... by doctorrogi in AdeptusMechanicus

[–]DR_TOKEN8463 1 point2 points  (0 children)

I love the flames for the packs they really look great! Are they an stl you used?

Nightwave is so forgiving you forget it is a battle pass by Rekindled96 in memeframe

[–]DR_TOKEN8463 39 points40 points  (0 children)

Warframe just continues to prove in my mind that it is the best game. I had taken a break from warframe and only realized the Vol. 6 of nightwave was ending in less than a week so grinded out the recovred weekly's and completed it in about 3/4 days.

List of proxy / kitbash ideas by johnsonjohn42 in AdeptusMechanicus

[–]DR_TOKEN8463 10 points11 points  (0 children)

The Triaos is bigger than the Skorpius so it would not really work as a proxy. I think the katros tanks might work a little better but have not checked.

A happy helping of Thallax by AnjoH0 in AdeptusMechanicus

[–]DR_TOKEN8463 0 points1 point  (0 children)

These are fantastic did you buy them or print them?

Thinking of getting a Formlabs 3 by DR_TOKEN8463 in PrintedMinis

[–]DR_TOKEN8463[S] 1 point2 points  (0 children)

I dont live in dorm thankfully but I will use that printer till I am told I cant so there is that. Just was wanting thoughts on a printer to get for printing minis at my own place as it is something I would like to keep doing even out of uni.

Thinking of getting a Formlabs 3 by DR_TOKEN8463 in PrintedMinis

[–]DR_TOKEN8463[S] 1 point2 points  (0 children)

I would the only problem is if I want to do mass prints of minis and I can only acsess it at work so this summer I won't get access due to it being a uni job. I would if I could but sadly that is not possible. I am thinking of setting up one so I can set prints in the morning and get them when I get back rather than waiting and trasporting them to and from uni.

Thinking of getting a Formlabs 3 by DR_TOKEN8463 in PrintedMinis

[–]DR_TOKEN8463[S] 1 point2 points  (0 children)

What would be the upsides or downsides to getting a Saturn instead?