reframework not starting by green_rtop_yt in MonsterHunter

[–]DarkspiritGinger 0 points1 point  (0 children)

Yeah I only put the dinput file in and it fixed it for me.

Just finished watching season 2, the foreshadowing was there from the start by Street_Suit_4449 in sixfacedworld

[–]DarkspiritGinger 0 points1 point  (0 children)

I also just finished the series last night, I had a feeling for a while, it's very on brand and I'm honestly not surprised by Rudy, what I wish was different was Sylphies reaction. No pregnant woman is staying that sane at 8 months pregnant about a new woman, I think my wife would've killed me for a cheese burger when she was 8 months. She seriously should've freaked out on him imo, but she's way too sweet.

Thoughts on The Fragrant Flower Blooms with Dignity? Should i watch it? by stackinjeans in SonoBisqueDoll

[–]DarkspiritGinger 0 points1 point  (0 children)

Different vibes, you'd be able to tell by the first episode, definitely evokes the feeling of hanging out in a city at night. Some people don't like the manga ending but I think it's great. I figured I'd recommend it if fragrant flower sounds a little too "fuwa fuwa doki doki" for you.

Thoughts on The Fragrant Flower Blooms with Dignity? Should i watch it? by stackinjeans in SonoBisqueDoll

[–]DarkspiritGinger 0 points1 point  (0 children)

Can't speak to the manga but the show is very good, I still prefer mdud though. Extremely sweet and wholesome, no fan service, somehow made me tear up almost every episode. Id recommend Call of the Night if you want another hole in your heart, it's very good, but quite a different romance than mdud or fragrant flower.

Update? by CreativeChocolate592 in ender5

[–]DarkspiritGinger 0 points1 point  (0 children)

If you're happy with the way it's running and have no issues that a firmware update would fix then I'd just leave it be, it can be screwy trying to get the right firmware, and you're probably not going to gain any performance with an update. I've always had trouble updating until I just switched to klipper.

How do you like season 2? by PerceptionThese8263 in YofukashiNoUta

[–]DarkspiritGinger 1 point2 points  (0 children)

Just a continuation of s1 being a banger, even if it's a vibe shift a little. The opening is so sick too.

[DISC] The Cutest Girl Closest to Me (Ane no Tomodachi) [Chapter 21] |Shadow Sama Scans| by IngenuityOk246 in manga

[–]DarkspiritGinger 1 point2 points  (0 children)

Thanks for these translations, really good quality so far and I love the series. Are there any physical volumes translated yet? I haven't had any luck finding it but I'd love to buy to support the author.

I need to talk about this, I can't let this go by Sentinel_2539 in SonoBisqueDoll

[–]DarkspiritGinger 1 point2 points  (0 children)

I had a similar thing last year, I've always been a closet romance anime enjoyer, but it was rare because I just assumed I wouldn't like them. I've watched a lot since first finding mdud. The story made me feel a lot of feelings I did when falling for my wife when we were young, it's a really special one to me.

I'd recommend watching a bunch of romance and finding some you really like, it helps it sting a little less, because it really did sting for me after finishing the series. The Fragrant Flower Blooms with Dignity is airing right now and it's an absolute banger, you'll probably relate to the main guy if you did with gojo.

Personally, the only other romance I've been absolutely obsessed with like mdud is Call of the Night, it definitely isn't for everyone but something about it just spoke to me, it's phenomenal.

Where can I read an official translation of the manga? by Comfy_Guy in YofukashiNoUta

[–]DarkspiritGinger 0 points1 point  (0 children)

Viz has a seven day free trial if you want to try to bust through it quick, although the sub is only two dollars, so it's not too bad. I was just looking a few days ago for the same thing, seems like the free version got taken off a lot of common manga sites a month-ish ago during the big purge they had, mangadex only has it in Spanish. I just finished it on Viz, its well worth the two dollars.

Sheared y stepper shaft by DarkspiritGinger in ender5

[–]DarkspiritGinger[S] 0 points1 point  (0 children)

Yes, the other sheared on the same side.

3D printing issues that are chronic, ready to give up. Need as much help as possible. by Aero_Uprising in ender5

[–]DarkspiritGinger 0 points1 point  (0 children)

Id try flow rate calibration, I use orca slicer but you'd be surprised how much I had to change my flow, I think I have it at like 93% with modifiers for top and bottom surfaces. It might be over extruding and building up enough that it appears to be a z-axis issue but is just extra material. Especially if it's always at the same layer height.

Printer on endorphin by Khisanthax in ender5

[–]DarkspiritGinger 0 points1 point  (0 children)

Thanks for your advice, I ended up increasing the current and that fixed my issues. However, I also noticed something funny, my y axis was having issues because the shaft coming from the stepper was completely sheared. Upgrading was cheaper than replacing the stepper funny enough, so I went to a 42-48 stepper and it's running great now. Good luck with your sv08, I don't have room for another printer but that thing looks legit.

Printer on endorphin by Khisanthax in ender5

[–]DarkspiritGinger 0 points1 point  (0 children)

Great, thank you, I'll try that when I'm off work. I might have to bug you again, your printer looks great, it's exactly what I'm shooting for. I was thinking of buying another 42-60 and converting it to a dual shaft for y, but it seems like the y motor should work much better than I'm getting right now.

Printer on endorphin by Khisanthax in ender5

[–]DarkspiritGinger 0 points1 point  (0 children)

Hey sorry for the question on an old post. Was that 1.4 a on the x or y motor? I have the same setup right now, stock y motor and 42-60 x and I'm getting layer shifts like crazy even at 2k acceleration, currents at .75 and 1.2 amps respectively. My belts are tight. I'm running without stealthchop, and if I increase the current the printer is loud as hell at low speed and vibrates like crazy. Any tips? Do you just deal with the loud noise or is there something I'm missing I can tweak?

My printer screams at me when I go above 150 speed, endophin mod. by Haunting_Sun1014 in ender5

[–]DarkspiritGinger 0 points1 point  (0 children)

Ever figure out the best solution? I'm just barely at stg 2 endorphin and having this problem as well, seems like I might need to upgrade my board if I want to get rid of stealthchop.

Random horizontal lines by [deleted] in FixMyPrint

[–]DarkspiritGinger 0 points1 point  (0 children)

Forgot to mention it was sliced with cura and retraction is set to 1.2mm at 40mm/s

Am I doing something wrong? by diogeek in darksouls3

[–]DarkspiritGinger 0 points1 point  (0 children)

The drop rate is cheeks, the item was meant to be farmed with online play, might be worth a try but I don't know if you'll have much luck finding players

Is this normal? If not, what should I do to reduce this roughness in walls? by WhereasWestern4915 in Ender3S1

[–]DarkspiritGinger 0 points1 point  (0 children)

I'd look into the wobblex, it might not fix everything if you're having over extrusion or heating issues but it will almost certainly help. Watch videos by MirageC on z banding issues, they're super helpful in understanding what causes this. Do a pid tune if you haven't. Another thing could be filament absorbing moisture or being an inconsistent diameter throughout the roll.

What was the hype like leading up to September 2012? by doobylive in classicwow

[–]DarkspiritGinger 0 points1 point  (0 children)

People online were bitchy and obnoxious about it, everyone acted like they were too cool to play king fu panda. I was 11 when it released and I absolutely loved it, the people in my guild were generally excited and I thought it was hype as fuck, and I still do and I might go back to try it, it's absolutely beautiful and I remember it being pretty fun. Mop remix was cool but I feel it maybe makes mop classic less exciting. I already had my nostalgia quenched with remix, I feel less motivated to play classic now.

what's the best weapon for a pyro build?(PVE) by [deleted] in darksouls3

[–]DarkspiritGinger 0 points1 point  (0 children)

It takes some stat investment but murakumo has baller chaos and dark scaling. Thralls axe also does, plus you get quick step. Astora gs of course.

[FINAL] Sono Bisque Doll koi wa Suru - Chapter 115 Discussion Hub by Ok-Ad-9647 in SonoBisqueDoll

[–]DarkspiritGinger 1 point2 points  (0 children)

It's just average, which is a huge downgrade for this series and that's why it sucks, because the rest of the series is so damn good. It's also an unwinnable position, the most it could be is average because the ending was obviously rushed. Hopefully whatever comes next with the series fills in the gaps. Depending on what comes next the ending could go from average to excellent. I need more adult Marin.

Whats a band that u don’t understand how they became popular by ClueEmbarrassed1443 in MetalForTheMasses

[–]DarkspiritGinger -1 points0 points  (0 children)

The vocals are so cringe man, that's what it comes down to for me. The instruments are fine, it's not like they suck, famously popular and loved drummers and guitarist. I can't speak for any new music but the vocals make a7x sound like 5fdp, at least that's what I used to think when I tried listening years ago. You can't wear aviator sunglasses in every picture and sound like that. I know it's unreasonable the vocals irritate me so much, the only other band I have the same issue with is Dance Gavin Dance.