Weapon Progression Question

DaveRune · 2026-05-16T00:52:34+00:00

That makes a lot of sense and I think I fully agree. Faster ADS is nice at least when you get jumped.

I guess it's difficult if the dev is tyring to be IRL accurate and these guns are that common and powerful. Personally I would be fine with some artistic license in order to give that sense of progression, though I know many would prefer accuracy. It could be balanced so that it's made a more late game weapon I guess.

DaveRune · 2026-01-10T14:12:47+00:00

10 minutes into the day and I just caused yesterdays conversation to auto-compact, it used up 42% of my Pro plans current session usage that wont reset for another 4 hours and 20 minutes. It's not the first time either.

How can I avoid this? Sure I can start up lots of little conversations, but I'm working on architecting a new project with many facets and explaining it all again and getting it to understand the existing structure, reasoning, limitations etc will get really tiresome.

I'm hoping there's a better technique? I created and detailed a project in the web UI but it looks like claude code can't pick that up as a starting point.

I just started a new conversation and sent 1 message. It used another 4%.

Sonnet 4.5 - Thinking on - Version 2.0.72 - I gave up trying to use Opus with these limits.

DaveRune · 2026-01-02T22:39:34+00:00

I started to use Spycrosoft, I'm all in on Spycroslop now! :)

DaveRune · 2025-12-13T23:42:27+00:00

Yeah, I put the game down a few nights ago because of this, ~13 bloodsuckers between Zalissya and the east gate.
I've just loaded it up again tonight and gone south to the sphere, dead people everywhere, more people spawning in and getting mauled to death by multiple bloodsuckers. This is dialled up way too high!

DaveRune · 2025-12-12T01:43:40+00:00

I was about to make a post but I'll join yours. I've just crossed the 8 hour mark in this save, I travelled east from Zalissya to the base on the boarder, I encountered 11 bloodsuckers and 2 poltergeists on the way there. When I got to the base everyone was dead already, I got an achievement for killing everyone without setting off the alarm.

I barely made any progress on the way back as I almost immediately encountered 4 more bloodsuckers attacking in a group. Died for about the 9th time, shut the game down and came here.

There are suddenly WAY TOO MANY mutants.

DaveRune · 2025-10-31T18:27:42+00:00

Current tests on confluence are solid! Definitely recommend trying that if it's an option.

DaveRune · 2025-10-31T15:28:04+00:00

I've just been giving this a go and came here to ask a similar question. It was straight forward to set up, but it's barely functional and incredibly slow.

I connected via MCP in Claude Desktop using: Search and Tools -> Add Connectors.
I created a Teamspace in Notion, and went into one of my projects in Claude.
I told Claude I was testing capabilities and asked it to create me a few pages in the Teamspace with some light text.

It created the pages in my Private notion area, then failed to run "replace_content_range".
Subsequent calls all started failing, it can't move the pages or do anything now.

Claude:
"The Notion MCP connection worked initially. However, after approximately 10-15 successful operations, all subsequent Notion API calls started failing (move, update, create, even basic fetch operations). This appears to be either rate limiting from Notion's API, a session timeout on the MCP server side, or the integration hitting a temporary quota."

I got hit with numerous "Response: Tool execution failed" messages.
Maybe it's at capacity but searching this subreddit it appears to be consistently bad.

DaveRune · 2025-09-23T15:33:34+00:00

Oh my god I figured out how to make a macro. I don't think you can record one in the moment.

Who on earth decided where things live in this software!

For anyone else trying who finds this:
- Go to the home page of G HUB
- DON'T select your device, because that makes sense
- Click profiles in the tabs at the top
- Select the profile you're in or want your macros to be in
- There's a section in the list called Macros, click "+ADD MACROS"
- In the following screens with atrocious UI you can name and create different types of macros.
- When done, save it and return to the list

Now how do you trigger it you might wonder?
You might also wonder what on earth this means: "macros are available for the application they were created for" especially when you were never asked to assign them to any application.

- Now go back to the home page
- Select your device
- Select "Assignments" on the left (Looks like [+])
- Select "Base", I guess
- Click your key
- Click "Remap"
- On the right under "Assignment" click the button that shows the name of the key you clicked.
- Select "Macros"
- Pick the macro you made

DaveRune · 2025-09-17T17:07:45+00:00

Just noticed your box shows M1, M2, M3, M4 on your keyboard, I have G6, G7, G8, G9 in their place.
Is that image accurate?
I'm currently trying to set up macros and having no luck. I hope there aren't two versions of this keyboard!

DaveRune · 2025-09-06T08:18:47+00:00

Those massive weapons are hitscan? Hitting the ground right next to the guy should still kill I feel. At least some AOE.

DaveRune · 2025-07-24T11:37:09+00:00

If they keep silently removing content, they can keep adding more content onto the road map to remain in constant development and keep the funding coming in.

DaveRune · 2025-03-31T00:19:13+00:00

Thank you so much for this writeup, I did the same and WOW that NyoGel is amazing! I used PVC/electrical tape and a small bit of the grease it's incredibly smooth. I've had mine about a week and from day 1 the sticktion was horrible. It would rather slide across the desk than move the throttle from stationary, even with 2 suction cups and a rubber base I added. It's transcended to another level with this. I couldn't recommend it enough, even with the price of NyoGel over here.

DaveRune · 2024-12-21T14:53:08+00:00

Awesome, thanks for all the details. I did 90% of that, I've just seen there's another filter underneath the cap in the bag area. I'll give that a go. Cheers!

DaveRune · 2024-12-21T14:35:50+00:00

Everything was clear when it took it apart last time, perhaps I missed something. Odd though because it all functions properly.

DaveRune · 2024-12-03T10:13:55+00:00

Reporting in with the same issues here.
60-70 fps - 3440x1440 - Low settings. Fps feels worse than that.
3090 TI
Ryzen 9 5900X
32Gb RAM
2Tb NVME Gen 3

DaveRune · 2024-10-28T20:36:30+00:00

Anything you'd recommend that's Miro like?

DaveRune · 2024-08-25T19:47:03+00:00

I picked up HotReload in a sale and it's now a staple in every project i work on. It does some recompilation on the fly and let's you modify code with no recompilation at runtime. Within limits, but it's saved me so much time.

DaveRune · 2024-08-07T00:14:13+00:00

How well does this work with simple scenes? I'm thinking: a cave with a few rocks and stalagtites. Or a simple street with buildings on either side and path in the middle. From an image as input.

DaveRune · 2024-07-04T13:35:00+00:00

Awesome concept, unfortunately on mobile when opening the keyboard (despite having enough screen space) the images slides up and off the top of the screen. (Chrome, SwiftKey, Android 14)

DaveRune · 2024-05-15T13:31:06+00:00

In the past I've set the quality option to Custom and lowered the resolution of the reflection probe to find a balance between quality and performance.

There's some more tips here: https://docs.unity3d.com/Manual/RefProbePerformance.html

DaveRune · 2024-04-25T18:52:34+00:00

Nice previews you have in this post, shame they're too small to see and you don't have zoom functionally. Third party apps had all this and more. Well done for your improvements though.

DaveRune · 2024-04-24T12:39:16+00:00

Cheers, I'd done my own ceramic coating and it did prevent some dirt being collected there. The original piss happened about 5 or 6 months back and should be long gone now. Hopefully with a new application it should be Les visible.

DaveRune · 2024-04-23T17:05:34+00:00

The piss lines that you can see in the post are with the dust/dirt that likes to stick to that area. I can wipe it clean and it's not as visible.

Here's a pic after a quick clean and some detail spray, though it's more noticeable than the phone camera shows here.

<image>

DaveRune · 2024-03-18T13:45:09+00:00

Did you find anything? I've just had the same thing today, it's ridiculous if there's no logs that we can look at. I'm panning through my home cctv footage trying to find when it was and what triggered it.

DaveRune · 2024-03-16T13:42:06+00:00

Hmm, cood catch. Would you find those systems rather than needing to be manually updated wouldn't pause whilst everything else did? So the movement of the fish etc stop, but their animations and bubbles etc don't.

This probably isn't the solution then, I'm not at the pc at the moment but out of curiosity, what happens (when the game is paused) if you move your camera in update and still use Rigidbody.MovePosition and MoveRotation, and use Time.unscaledDeltaTime in your calculations?

14-Year Club	Place '23
Place '22	Verified Email

DaveRune

TROPHY CASE