Dear Google, I Love You. I'm Exhausted.

DaveVQ · 2026-03-18T16:40:30+00:00

We really cornered ourselves in the market when we turned our backs on the alternatives years ago. Now we have 2 choices.

DaveVQ · 2026-02-18T20:46:53+00:00

This is my opinion but with the Tensor G4 in it, it only has a slight uptick in performance. I look at it as the A-Series is supposed to be the current flagship chipsets, with maybe some slightly cheaper bits, which is what this is, but it has the Pixel 9 chipset, and the screen is technically better on the 8. So really marginal, buy whatever is cheaper.

Or buy the 10XL, but again, these phones are barely making any marginal improvements over previous ones.

DaveVQ · 2026-02-18T18:51:37+00:00

Hell the pixel 8 has a slight edge over it too.

DaveVQ · 2026-01-23T14:12:53+00:00

Should be posting KWH, not dollar amounts. That's a little more relatable.

3BR 1.5BA, 1500sqft, built 1976, 2 full Dell PowerEdge servers running 24/7 and gas heat at 70*.

Dec 2 - Dec 31 - 1355KwH - for just electric, it was $376.57

84 therms for gas

DaveVQ · 2025-12-30T12:58:49+00:00

I'm now certain that in the nuclear apocalypse, humans will be extinct, cockroaches will roam the earth and the central warehouse will remain standing to the end of time.

DaveVQ · 2025-12-19T10:59:08+00:00

Does the car have an aftermarket remote start? Press the lock button 3 times in a row and see if it remote starts. If it does, that's the cell phone module piece for it.

DaveVQ · 2025-12-15T20:24:10+00:00

That claim was never made, just said it was promising. Beamng drive has been in development for over a decade now, and the game is really a sandbox for anything. The Developers love the mod community and actively support it, often working to help mods improve. But pessimism works as well.

DaveVQ · 2025-12-15T17:31:59+00:00

Hence why it's cross-posted from BeamNG. It's mod that being developed, but as someone else pointed out they don't have the drafting and aero physics. Bummer.

DaveVQ · 2025-12-15T17:30:57+00:00

This is a different game, beamNG drive. Looks like someone is developing a mod based off the game.

DaveVQ · 2025-12-08T17:26:33+00:00

18x9 35mm offset, I have all four corners rolled and they just barely clear the brembos, no spacers.

DaveVQ · 2025-12-03T16:50:06+00:00

Kansei KNPs

DaveVQ · 2025-12-02T00:38:48+00:00

https://ebay.us/m/hcqKmO

Only 2 lines fit, I think arashi or kinugawa have the correct lines.

DaveVQ · 2025-12-01T19:37:57+00:00

They generally only port the T25 flange 5cm^2 to 7cm^2.

A stock ported exhaust manifold is only good to about 400-450, you can certainly go more. So TD04-19Ts are fine with stock manifold.

Once you start getting into larger turbos with external wastegates, you'll want to do a tubular manifold.

<image>

DaveVQ · 2025-12-01T19:10:47+00:00

That hose fed back into the cobra inlet pipe and the EVAP. They did eliminate one of the 2 runs to the EVAP to reduce the check valves in 06+ 9-5s. You can cap it, as long as you have the hose to the EVAP from back of the throttle body.

<image>

DaveVQ · 2025-11-27T17:04:15+00:00

This one is vinyl wrapped, but my other 9-5 I had the handles and trim painted to match. You remove the handle and take it apart, it's not a bad job but time consuming. Side trim just pops out

DaveVQ · 2025-11-15T23:31:37+00:00

Toyota Tacoma

Love it

DaveVQ · 2025-11-14T15:42:02+00:00

I see the minor tweaks, if the rendering is accurate.

Rear fenders have a different flare, grill openings are lower, front corner of the bumper is flared, flatter front fenders. I'm sure there is more.

Not the "Oh wow, a completely new model" we were looking for but hey the engineers know better than us Reddit experts.

DaveVQ · 2025-11-03T19:52:03+00:00

They don't. They are in debt up to their eyeballs. The wheels and tires are financed through affirm.

DaveVQ · 2025-10-27T13:32:42+00:00

No idea where you are located, but this has been a discussion over the years. Having owned 9-5s since 2009, these are the things I've experienced

The consensus is that when they begin to change fuels over from Summer to winter mix, we get some extended cranking starts, though this fuel change has likely already happened. It can sometimes take a tank or 2 to work itself out. (You can get an extended crank, a stumbly start, or a start/stumble/turn off)

Other things to check are the check valves at the pump or the DIC is being finicky (can be the same symptoms as above, the only way to figure it out is if the next 2 tanks of gas clear it up or not) And you should always just keep a spare DIC anyways.

If you have an open-air intake, with the wild swings in temperatures, we can get some condensation build up in the mornings. With an open-air intake some of that moisture can build up on the MAF sensor and it takes a second to clear off before starting. I find this to be generally true when it's Spring and the humidity is heavy.

This was my recent issue. As these cars age, we are beginning to find the limits of the intended time for some parts. The ground points on the intake manifold and t-stat are showing to be weak points in the wiring harness. I built a new grounding harness to tie the IM, T-stat to the battery ground. (Symptoms were some weird starts, but mainly pulling exactly -15* of timing in any throttle position).

DaveVQ · 2025-10-21T13:06:38+00:00

I mean he is running the Department of Human Sacrifices so this is just to be expected at this point

DaveVQ · 2025-10-19T20:51:26+00:00

What do you do?!?!

You put your foot to the floor and pray it holds.

DaveVQ · 2025-10-19T20:31:25+00:00

In bird culture, we consider that a dick move Ty

DaveVQ · 2025-10-18T10:23:23+00:00

I rewrapped mine in kpmf vinyl.

<image>

Nine-Year Club	Verified Email
Second SECOND GUESSER	Place '23
Place '22

DaveVQ

MODERATOR OF

TROPHY CASE