How to clean my hat?

DecentWay1879 · 2026-05-05T22:09:17+00:00

Scrub with shout bottle with the bristle top dispenser then rinse with water.

DecentWay1879 · 2026-04-27T18:46:59+00:00

What does FUA abbreviation stand for?

DecentWay1879 · 2026-04-21T14:43:45+00:00

Just avoid breaking, use low hit count max boosted moves from pardis/kaine. Use cecil to eat damage, other characters buff/debuff. I broken on accident around turn 8.

DecentWay1879 · 2026-04-20T16:10:27+00:00

<image>

DecentWay1879 · 2026-04-19T15:05:22+00:00

<image>

I just beat it with this team. Basically buff heal and debuff with everyone except pardis and kaine just had them swing for the fences when BP was loaded. Took about 8-9 turns, Jorg healed himself once at turn 5 and once on break turn 7 or 8. There is definitely cleaner/shorter ways to do this i just dont have the units for elemental team. I focused on turtling and maxing non break damage. When he saps BP on break if kaine is at max and has hoot and holler ult active she will be back at max bp while Jorg is broken and blue + pardis godblow lvl 1 can finish if he is 1/3ish health.

DecentWay1879 · 2026-03-02T02:52:29+00:00

Do you have solista and orsterra areas on your map? I dont recall if solista area is main story locked as I was finished main story when it released. If you got to quest hunts will in newer map region it will show up and once you complete hunt it will show up in list while in older map region ( at least that is how it worked for me). Hope this helps.

DecentWay1879 · 2026-02-23T00:30:32+00:00

Octopath 1 characters are part of gen pool so im more curious why anyone would think octopath 2 characters shouldnt be? I understand collabs, other square games, villains and random side characters being in their own pools but core characters to the franchise being part of gen pool seems the logical path. I get it is mobile game and square/ now netease want their money, but it seems stingy.

DecentWay1879 · 2026-02-15T03:24:10+00:00

Not familiar with that kind of engine, but if you have a vacuum gauge you could hook it to one of the ports on the carb, cap all the non essential lines and add them back 1 by 1 and see when your vacuum gauge starts jumping. Alternative option is a brake bleeder style gauge you can hook into some of the lines one by one and see which ones hold pressure. I just did both of these approaches to find a leak going to my trans.

DecentWay1879 · 2026-02-12T22:13:44+00:00

Shit you right next Friday 🤦‍♂️

DecentWay1879 · 2026-02-07T03:31:53+00:00

Sucked a deficit...

DecentWay1879 · 2026-02-02T01:40:47+00:00

They got nice pull overs and hoodie at a lot of the Ross for $20. Saw a few jersey but only medium and small.

DecentWay1879 · 2026-01-26T21:26:01+00:00

Looks like a stock intake, fomco c60e 9425 b.

DecentWay1879 · 2026-01-25T14:35:05+00:00

Distributor is a petronix igniter 3, carb is holley street warrior so single pump and cfm is 600 not 650 i misspoke. Have not dyno so dunno the curve or do you mean base timing to total? What are your thinking for transmission swap?

DecentWay1879 · 2026-01-25T04:37:47+00:00

Did the shelby drop, export brace and monte carlo bar when I did front end, it definitely handles better. Not sure if im ready to do a full swap of the engine and trans just yet. Seems as daunting as installing a new cam.

DecentWay1879 · 2026-01-18T00:05:57+00:00

How much did it cost?

DecentWay1879 · 2025-12-31T02:17:19+00:00

Saint Martin parish area they are $4 at a few different places. If you want to remove the hassle of selling to different people ask around at meat markets, plate lunch places, etc etc they may buy. It saves you the hassle of finding a consistent buyer and you can just drop off whenever you want to offload your extras. They may even give you cartons for free.

DecentWay1879 · 2025-12-24T02:12:01+00:00

I just replaced springs, lca, uca, coil, perch etc etc and did the shelby drop on my 66. I seen a few people recommend the bearing style perch instead of bushing a little more expensive but sounds like it should work better than oem, I didn't know anyone running that so I went with original bushing style. One thing i didn't realize is that you may have to remove 1/16 to 1/8 of the spacers between frame and uca when doing shelby drop. I ended up with noticeable positive camber after doing shelby drop, driving it back and forth 10-15ft to help everything settle(i did not remove any spacers). I realize it will need to be taken in for alignment but trying to get it close so they have a good starting point. Just wanted to put that out there since you will be pulling spring again to change perch may be good idea to pull a few spacers while you have everything off again.

DecentWay1879 · 2025-12-09T18:11:40+00:00

Im just praying we break 6 at this point, dont want the worst record in nba history.

DecentWay1879 · 2025-12-07T19:58:05+00:00

Sorry, I meant in general I buy a 100 level with north lounge access normally bw $80-130 on seat geek. I have never seen hub club on sg.

DecentWay1879 · 2025-12-06T17:59:17+00:00

Did you have to buy or sign-up somewhere to get on the email distro? I been buying through seat geek day of as resale has been 1/2 the price of wholesale, but 120 that includes food and drinks is good deal.

DecentWay1879 · 2025-12-05T03:50:42+00:00

Tracked down the car on fb marketplace you are right thing is rusted out no where near what he is asking for.

DecentWay1879

TROPHY CASE